Streamline K2051SLSWS24, K1206SLSWS26, K1605SLSWS24, K1206SLSWS18 Installation Manual

INSTALLATION INSTRUCTIONS

SUGGESTED TOOLS

SILICONE SEALANTDRILL TAPE MEASURELEVEL PENCIL

SCREWDRIVER DRILL BIT

This product is fragile and can break, chip, or cause injure if handled recklessly.

WARNING!

Please consult with a professional when installing.
Before installing, read entire instructions. Observe all local building and safety codes.
We recommend consulting a professional if you are unfamiliar with this type of installation. Streamline accepts
no liability for any damages to the floor, walls, plumbing, or for personal injury during installation

Using a pencil, mark holes on the
wall where you would like to
position the brackets.
Please ensure that they are fixed
on an even level.

Drill holes where you have created
the markings.

Using a screwdriver, fix the
brackets onto the wall.

Assemble the faucet and drain on
the basin and connect the faucet pipe
and drain pipe to the valve as per the
manufacturer’s instructions.

Hang the basin on the wall, ensuring
that it is affixed to the brackets
and level.

Finally, apply silicone sealant
in between the wall and the top
of the basin in order to secure it.