Streaming video 7704, 7708 User Manual

Download

Page 1

H.264 NETWORK

Embeded DVR

(7704/7708)

USER MANUAL

CONTENT

1 INTRODUCTION......................................................................................................................3

1.1 Main Feature ......................................................................................................................3

1.2 Product features.................................................................................................................3

1.2.1 Parameter.....................................................................................................................3

Page 2

1.2.2 Basic working parameter..............................................................................................5

1.3 ENTIRONMENT ADAPTABILITY ............................................................................................5

2 Device operation manual .........................................................................................................6

2.1 Remote key instruction.......................................................................................................6

2.1.1 Remote control.............................................................................................................6

2.1.2 Mouse Operation..........................................................................................................7

2.1.3 Menu Tree ....................................................................................................................9

2.2 System Operation.............................................................................................................10

2.2.1 User Login ..................................................................................................................10

2.2.2 GUI OPERATION.......................................................................................................11

2.2.2.4.1 SYSTEM LANGUAGE SETUP ..................................................................................16

2.2.2.4.2 DATA/TIME SETUP ...................................................................................................16

3 IE OPERATION......................................................................................................................27

3.1 FEATURE.........................................................................................................................27

3.2 USER LOGIN ...................................................................................................................27

3.3 OPERATION INTERFACE...............................................................................................28

3.3.1 LIVE............................................................................................................................28

3.3.1.1 PTZ CONTROL.................................................................................................28

3.3.1.1.1 ZOOM ...............................................................................................................29

3.3.1.1.2 PTZ PRESET....................................................................................................29

3.3.1.2 PLAY .................................................................................................................29

3.3.1.3 OTHER OPERATION .......................................................................................29

3.3.2 REPALY .....................................................................................................................30

3.3.3 SETUP........................................................................................................................32

3.3.3.1 RECORD...........................................................................................................32

3.3.3.2 ALARM..............................................................................................................33

3.3.3.3 PTZ ...................................................................................................................34

3.3.3.4 NETWORK........................................................................................................34

3.3.3.5 SETTING...........................................................................................................35

3.3.3.6 HOST INFO.......................................................................................................36

4 DVR Installation Guideline.....................................................................................................37

4.1 Product Overview.............................................................................................................37

4.2 HDD Installation ...............................................................................................................53

Page 3

1 INTRODUCTION

1.1 Main Feature

DVR-8304/8308 is developed base on HI3511 hardware platform. 8304 is 4channel CIF resolution digital video recorder and 8308 is 8channnel DVR. Both of them have local recording, playback, support trible code remote network surveillance, data backup, parameter setting, motion detection, I/O alarm setting, PTZ and USB mouse.

1.2 Product features

 H.264 compression  Two USB interface, USB2.0 for data backup, USB1.1 for mouse operation.  3.5” SATA HDD.  Special file system for secureity.  16 nature translucence GUI, note for menu selected  optimized four channel simultaneously playback, (8ch just support one channel

playback)

 double level user management

Support the live view, parameter setting and copy playback video via network.

1.2.1 Parameter

Item Device performance index

Language Chinese/English

System

Video

Audio

GUI Graphic menu

password user password, administrator password

Video in

4ch complex video input 1.0Vp-p，impedance75Ω

BNC

2ch complex video output 1.0Vp-p

Video out

impedance75Ω，BNC

Video display 1/4channel switch/8ch 1/4/9 switch

PAL，25f/s，CCIR625line，50scene

Video standard

Audio input

Audio output

Basic electricity

output

NTSC，30f/s，CCIR525line，60scene

4ch audio input，impedance600Ω，RCA

1ch audio output，impedance600Ω，RCA

Linearity electricity

，

Page 4

Picture proceeding and store

Alarm

Connector

Record style Audio video recorded simultanously

Audio compression

Picture compression

ADPCM

H.264，（VBR） / (CBR)

Picture resolution CIF/HD1

Streaming style ISO14496-10

Audio style ADPCM

CIF: 384~768 Kbps

Video code rate

HD1: 512~1024 Kbps D1：512~1024 Kbps

Audio code rate 32KB/s

Data storage

Alarm input 4 alarm input

Alarm output 1 alarm output

Servial interface Support 1 RS232

Servial interface Support 1 RS485

Network interface RJ45，10M/100M

Mouse

USB1.1，

USB

Udisk USB2.0

VGA VGA

1 VGA （select）

Software PC playback Playback video file

Software upgrade

Support USB,network firmware upgrade

voltage input AC:110~240V

DC：19V@3A

ohters

Voltage output

Voltage input +12V@1A

Power 6W without HDD Working tempreture

-10----60℃

Page 5

1.2.2 Basic working parameter

item parameter remark

Voltage input 19V

Voltage outputfor

camera

Video impedance input

12V（+/-0.2） 12V，1A。

75Ω

DC 19V。

75Ωeach channel。

Video output 1Vp-p 1Vp-p CVBS signal

0—2V Low voltage alarm

I/O

5V-30v Hight voltage alarm

RS232 serial port, for extend use

RS485

Connect to PTZ, (Pelco-D，Pelco-P)

SATA HDD One SATA with all capability

1.3 ENTIRONMENT ADAPTABILITY

For the saftly using DVR and prolong device life, please pay attention on following detail：

1) When installing device, please comply all the electric product safty criterion；

2) Power and ground：

 Do not touch the power and DVR with a wet hand

 Do not drop liquid on DVR

 Do not put others on DVR

 Please using soft dry cloth when clean DVR, do not using chymistimpregnant

 When the power line connects with jack, even don’t startup device. There is still have

voltage

 If you do not use device for long time, please take the power line away from jack.

Page 6

2 Device operation manual

In device operation, the enter key on remote control has the same function with mouse left

click.

2.1 Remote key instruction

2.1.1 Remote control

Handheld IR Controller Key Functions:

【【【【0－－－－9】】】】

keys

During setup, number keys are used to input values.

：：：：

For viewing channels 1,2,3 and 4, use 1,2,3 and 4 on numeric keypad

respectively.

Page 7

【＋】

【＋】,【－】

【－】

keys

：：：：

【＋】【＋】

▲

，

Enter

【【【【

【－】【－】

Up, Down directional keys: Move selection up and down in setup menu.

：：：：

Left, Right directional keys: Move cusor left or right in setup menu.

：：：：

key: During setup, select and save entry

】】】】

During setup, plus and minus are used to select next or previous values.

During Playback and preview, displays the channel name, text number, driver name, event sensor item and time, year/month/date, time, GPRS/GPS info. on the screen.

【【【【

PLAY

】：

Starts/Resumes playback from any other mode (FF, RR, Frame by Frame etc)

】：】：

SLOW

【【【【

Reduces playback speed to 1/2X、1/4X、1/8X、1/16X mode. Press PLAY to

】：

】：】：

return to normal playback speed.

【【【【

PAUSE/STEP

】：

Freezes playback to single frame and can advance one frame at a time.

】：】：

To advance the frame press Pause/Step to move frame by frame. Press EXIT to return to normal playback speed.

【【【【

FWD

】】】】

: Fast forward the video while playback.X1, X2, X3, X4 modes available.

PressFWD to switch, press 【PLAY】to return to normal speed；

REV

【【【【

: Reverse the video while playback, 1X,2X,3X,4X four modes are available. Press

】】】】

REW to switch, press【PLAY】 to return to normal speed；

【【【【

POWER ON

【【【【

Reset the MDVR to Power on and Power off mode. (standby and start up)；

】】】】

: If the security is enabled in the setup, use LOGIN/LOCK key to enter the

】】】】

user setup. It is important to remember the password due to without

restoration function. Log in（to enter into “User ID select” and “Password”

input interface）and lock functions（To exit setup and operation）

EXIT

【【【【

RECORD

【【【【

STOP

SETUP

【【【【

PTZ

【【【【

: Exit to the preview or return to the last menu；

】】】】

】：

Start manual record

】：】：

Stop manual record

】：

】：】：

Enter into setup interface and setup the system parameters

】：

】：】：

PTZ control，press this key to enter into PTZ control interface when at single live

】：

】：】：

view；

ASISTANT】for future use

【

2.1.2 Mouse Operation

You can use mouse to make operation of the menu except IR remote controller. (The operation usage is the same as PC Windows).Please inserts the mouse into USB1.1.

Enter into main menu: Click the right key on the live view.

Click right

key

Exit the present menu: It won’t save the settings if you click the right key to exit.

Exit the playback interface: Click the right key to exit when you are playback.

Page 8

Click the left key to enter into the setting interface.

Click the left key to zoom in the window on the live view and playback video. Double click the left key can exit to the live view and playback multi-window interface.

1. Volume adjustment, color adjustment, PTZ setting and VGA border operation.It is for setting the single channel for volume adjustment, PTZ control and color adjustment.If it is multi-window, please use the left key to select the single window.

2. The remark when click the left key for volume adjustment,color adjustment,VGA border is as follow:

Click left

key

Click left

or right

key

a. There is and on the PTZ setting to adjust parameter, click it can make the setting for PTZ.

b. There is a sticker to show the volume on the volume adjustment interface.Move the mouse to the corresponding position and click the left key,The right side of sticker will show the volume ,click “x”to exit;

c. Color adjustment and VGA border operation can refer to the volume adjustment interface operation.

When there are many options in the option frame,click left key to ball out down-pull menu.

To click the left key on the playback interface can make >> means forward, << means rew, >>I means Slow play, I> means frame play,> means Play, X means exit.

1. In the input frame, click the left key or right key can activate the keyboard. Click the right key can make the switch of Chinese and English on the soft keyboard.The number, symbol, english can be input by clicking the mouse.

2. Pingyin also can be input by the softkeyboard when enter Chinese, the method is the same as IR remote controller.You can use the left/right key to turn over the page when check on Pingyin/Chinese word.

3. When input number, click the right key, the number soft keyboard will bob up firstly, and then use the left key to select the corresponding value.Also click the left key to exit the number keyboard.

1. Press the left key to move the mouse can adjust the parameter on the volume,

Mouse

move

color, VGA border interface.And the corresponding parameter will be display at the same time.

2. In the Motion Detection setting interface, you can use the left key to drag the frame to set the motion detection area.

Page 9

2.1.3 Menu Tree

You can control the DVR by a lot of menu operation.This tree will show you the menu

structure and it will be in details in after chapter.

Page 10

2.2 System Operation

2.2.1 User Login

1. START-UP

Connect the DC19V/3A adapter to DVR. When start up the DVR, 【POW】LED will be on

and 4 images will be display on the screen. If it has setup ignition recording or time recording, the system will record automatically and the corresponding LED will be on, the system work normally.

Remark: If there is no HDD in device, or device didn’t read the HDD, it will display an 【H】

in live view.

2. SYSTEM LOGIN

When you login, you will find the window as follow if the password is enabled, Input device

ID and user password via numeric key-board, and you access to main menu via press 【Apply】

Remark: default device ID is: 00000, and the password is :user password is oooooo and Admin password is 020818, in order to manage the device more convenience, please setup the user password and change the device ID in the base setup. You can setup user and admin password, Administrator has all authorities, operator has limited authorities who they can only watch, playback, please change the unit ID and default password in time for system security.

Unit ID: You just need to enter the unit ID as the right frame. Password: enter the admin password or user password.

Page 11

2.2.2 GUI OPERATION

The main menu include “SEARCH”,”RECORD”,”HDD”,”BASIC”，“ADVANCE”,and“Exit”.

Remark: You must after pressing “APPLY”to make the setting for submenu valid.It will no use when exit directly.This DVR have a special feature is: when you move the mouse to everwhere, there will have the explanation information showed autoly.

2.2.2.1 RECORD SEARCH

Move the cursor to 【RECORD SEARCH】（Icon highlighted when selected）,press【Enter

to enter into the setting interface.

RECORD FILE:You can adjust the checking date and time,press【Enter】【+】/【-】 or input the

number directly to adjust the year,month,date.After finishing the time setting,move the cursor to “SEARCH” and press”APPLY”,can see the recording status of this date.As follow:

】

Page 12

Intruction:

1. MONTH: It will show all the recording status in this month. Green means normal recording, Red means alarm recording, Grounding means no recording. Click any date in this frame can search the recording status of that day,the searching result will be showed in the below date frame.

2. DATE:

this period via click the corresponding period.

PLYBACK:You can press 【Enter】【+】/【-】 or input number directly to setup playback time.After

setting,move the cursor to “PLAYBACK”, and then press”APLLY”to enter into video playback of that time.Also you can select any period of time in the video status frame after searching,press”APLLY”to enter into the video playback of this period.

FILE LIST: LOG SEARCH: Enter into the log seaching interface. EXIT: Exit”video search” to back to the previous menu.

1. FILE LIST

Setup the searching date, after pressing “SERACH”,move the cursor to “FILE LIST” and press”APPLY”to enter into the video file list of this date.

CHANNEL: There is 1,2,3,4 and all channel, totally 5 options. Press 【Enter】or 【+】/【-】to select.

TYPE: There are all,normal and alarm,totally 3 options.Press【Enter】or 【+】/【-】to select.

It will show all the recording status in this day, you can playback the record file in

Enter into the video file list interface of the selected date.

Instruction

：：：：

1. 【FILE LIST】，“CHANNEL”is the recording file which belong to which channel, “SIZE” is

display the size of this file（Unit：MB），“TYPE” is display the type of recording file，there are two

types: normal and alarm，press“BACKUP”button can export the selected files to USB storage；

2. After moving the cursor up and down and select the files, and press【APPLY】to enter into

playback interface。If the all channels have recording files, it will playback all windows at the

same time；

3. If setup as “on” in the【RECORD TIME】in 【BASIC SETUP】，it will show the date/time

Page 13

when playback record file；If setup as “off”it will not display time；

4. When playback，can press【SLOW】to play slowly；press【FORWARD

】、【

REVERSE

to speed、reverse play；also can press【PAUSE/STEP】to pause and frame by frame play；Press

【

Exit】to exit from playback and return to the former menu；

5. When finished playback files, it will return to the file list interface.

2. BACKUP

You can use USB for backup，should insert USB device into the USB2.0 port before backup files.

And it is support USB OTG.

You can select the recording file by direction keys or

【＋】、【－】

, and press【Enter

】

means selected OK（There is a “√” at the end of the selected recording files）and press 【Enter again the “√” will disappear that means cancel the select, we can start export the recording files

after selecting, and press【BACKUP】to start to backup, as follow:

】

Instruction：

When the space in backup device less than recording file, the system will prompt “Space

．．．．

no enough”.

You can move USB device directly when backup finished。

．．．．

2.2.2.2 RECORD SETUP

Move the cursor to 【RECORD】（Icon highlighted when selected）,press【Enter】to enter

into the setting interface. Press【Confirm】 and enter into the setup interface, and you can use

direction keys and cursor to change the options.

Page 14

CHANNEL

RESOLUTION

：：：：

ON: Means the channel enable for recording.

Setup resolution and code rate for recording, there are HIGEST, HIGH,

：：：：

NORMAL three options, corresponding to D1、HD1、CIF resolution.

QUALITY

：：：：

There are BEST, FINE ANDNORMAL three option, corresponding HIGHEST,

HINGAND NORMAL data stream standard

AUDIO

ON: Means enable the audio recording for all channels, OFF: Means disable audio

：：：：

recording

REC.MODE

：：：：

POWER UP: Means the device will start recording when it startup.

TIME: Recording as the schedule, you can setup the schedule as you want as follow.

CHANNEL：You can select all channel or just one channel（blue means has selected）

WEEKLY：You can select all everyday, weekend, workday or each day(blue means has

selected)

DAILY

There are ALARM, NORMAL, NO REC three modes, if you select this, that means all

：

the day will record as this mode, and if you don’t want some period to record, you can cancel it

via【Enter】 button, grounding means don’t record, different color means different record mode:

Red means alarm record, green means normal record, grounding means no record.

Page 15

RECORD SIZE：There are 15min, 30min, 45min, 60min four options, that means it will pack

as the mode you selected

Scroll to

APPLY

and press

ENTER

to save the new settings.

2.2.2.3 HDD MANAGE

Move the cursor to 【HDD】（Icon highlighted when selected）,press【Enter】to enter into

the setting interface, and you can use direction keys and cursor to change the options.

HDD STATUS

There are three status available, normal, un-format, No HDD. If HDD can not run

：：：：

normally（including unformat and no HDD）, there is a 【H】display on video live view.

OVERWRITE

：：：：

ENABLE: means when HDD space less than 4G, it will delete HDD earliest

recording file, and it will stop deleting when the space is 10G; DISABLE：means when HDD

space less than 500M it will stop recording, and an prompt will display in live view “please shutdown and replace HDD”

FORMAT

Move cursor there to select device and press【APLLY】 to start format

：：：：

2.2.2.4 BASIC SETUP

Move cursor to select “BASIC SETUP” (The big icon means select ok)and press【ENTER

to enter into the system language setup interface.

】

Page 16

Basic setup includes system language, time/date, security, display, video/audio and exit six options.

2.2.2.4.1 SYSTEM LANGUAGE SETUP

Move cursor to select “system language” (The big icon means select ok)and press【ENTER

to enter into the system language setup interface.

System language have Chinese and English two options, you can setup the language you want in here.

Remark:

The device will restart when you setup system language success.

】

2.2.2.4.2 DATA/TIME SETUP

Move cursor to select “date/time” (The big icon means select ok)and press【ENTER】to enter

into the date/time setup interface.

DATE: Setup system date via numeric key.

DATE FORMAT:

Press ENTER to switch between the date patterns, there are YY-MM-DD

Page 17

and MM/DD/YY two options.

TIME: Setup system time via numeric key.

TIME FORMAT:

Press ENTER to switch between the date patterns, there are 12 HOURS

and 24 HOURS two options.

Remark: You must move the cursor to the 【MODIFY TIME AND DATE】 and press

APPLY】 to save it, otherwise it won’t save the modify if you exit this interface.

【

DST: haven’t finished yet.

2.2.2.4.3 SECURITY

Move the cursor to【SECURITY】（Icon highlighted when selected）, press【Enter】to enter into

the setting interface.

DEVICE ID

PASSWORD

Press【+】/【-】or number key to setup the unite ID

：：：：

Press【APPLY】 to start or close user password. If it is “ENABLE”, you must

：：：：

input password when log in, otherwise, you can enter into main manu directly.

USER PASSWORD

ADMIN PASSWORD

Press 【+】/【-】or numbe keys to setup user password.

：：：：

Press【+】/【-】or press number keys to setup admin password.

：：：：

2.2.2.4.4 DISPLAY SETUP

Move the cursor to【DISPLAY SETUP】（Icon highlighted when selected）, press【Enter to enter into the setting interface.

】

Page 18

NAME: press【Enter】to enter into the setting interface.

POSITION:press【Enter】 to switch name location,there are 5 options:bottom left, top left,

bottom right, top right and OFF.

COLOR

press【Enter】to enter into setting interface, as following:

：：：：

Press【Enter】or【+

chroma,brightness, contrast and saturation, press【APPLY】to save the parameters.

PREVIEW

PREVIEW TIME:

ON: Means the channel is allowed to view the live mode, OFF means not.

：：：：

ON: Means insert clock in live view, OFF means not.

RECORD TIME ：ON: Means insert clock in record file, OFF means not.

2.2.2.4.5 VIDOE/AUDIO SETUP

Move the cursor to【VIDEO/AUDIO SETUP

Enter】to enter into setting interface.

【

】【-】

key or directly drag the cursor to set colors,including

Icon highlighted when selected），press

】（

Page 19

VGA RESOLUTION

press【Enter】key to setup the VGA resolution, there are

：：：：

1024*768、800*600 and 600*480 three options.

CAMERA SYSTEM: press【Enter】to switch camera system, has PAL and NTSC two options

VOLUME SETUP

：：：：

move cursor to【VOLUME SETUP】，press【Enter】to enter into volume

setup interface, press【+】【-】or number keys or directly drag the cursor to adjust volume.

2.2.2.4.6 EXIT

Move the cursor to【EXIT】（Icon highlighted when selected），press【Enter】to back to main

menu.

2.2.2.5 ADVANCE SETUP

Move the cursor to【ADVANCE SETUP】（Icon highlighted when selected），press【Enter

to enter into setting interface.

Advanced Features include Alarm settings, system information, Motion detection, mobile phone monitoring, system maintenance, PTZ and network setting.

】

Page 20

2.2.2.5.1 ALARM SETUP

Move the cursor to【ALARM SETUP

Icon highlighted when selected

】（

to enter into setting interface.

I/O CHANNEL

Each channel corresponds an I/O status, that is, when an alarm triggered, it will

：：：：

activate the corresponding channel to start alarm recording.

N.O：indicate I / O input level from high to low effective

N.C：indicate I / O input level from low to high effective

HDD LOSS

ON means it will trigger a alarm if there is no HDD, and it will display an 【H】

：：：：

On the bottom left of channel 1 in the live view

HDD SPACE

：：：：ON：

If the space less than 500M, there is a remark in live view：No enough space,

please change HDD after shutdown.

VIDEO LOSS

：：：：ON：

ALARM MANAGE

when one channel has no video input, it will display “video loss”in live view.

：：：：

There are alarm output, buzzer and post REC three items.

OUTPUT：when an alarm triggered, the alarm output time will be:

0 second、10 seconds,20 seconds,40 seconds and 60 seconds

BUZZER：buzzer calling time setup when alarm triggered: 0 second,10

●

seconds,20 seconds,40 seconds and 60 seconds

POST REC.：post recording time setup: 30 seconds,1 minute,2 minutes and 5

●

minutes

●

PRE REC：Pre-recording time is fixed as10 seconds.

2.2.2.5.2 SYSTEM INFO

press【Enter

），

】

Move the cursor to【SYSTEM INFO】（Icon highlighted when selected），press【Enter】to

enter into setting interface, at this interface mainly display system hardware features and

firmware version, include : device type, software version, MAC address、serial number.

Page 21

2.2.2.5.3 MOTION DETECT

Move the cursor to【MOTION DETECT】（Icon highlighted when selected），press【Enter

】

to enter into setting interface.

STATUS

Each channel has corresponding channel switch, press 【Enter】to turn on or turn

：：：：

off the motion detection for each channel..

SNESITIVITY

high,higher,medium and low, press【Enter】key to switch

MD AREA

：：：：

each channel has corresponding sensitivity setting,including four standards

each channel has corresponding regional motion detecting setting,move the cursor

：：：：

to corresponding【setting】，press【Enter】to enter regional setting interface, red area means it

have activated motion detection, transparent block means it have not activated motion detection.

Page 22

Move the direction key on romote control to make cursor move in the small pane, green

frame means the cursor has moved to this pane, press【Enter】to select or cancel motion

detection of this small pane, when setup finished, press【exit】to back to MD setup interface, it will

save automaticly.

Remark: IR Operation: press [Menu] key to select or cance all the screen.

Mouse operation: click left and drag the frame to setup the region for motion detection.

2.2.2.5.4 MOBILE

Move the cursor to【MOBLE】（Icon highlighted when selected），press【Enter】to enter into

setting interface.

CHANNEL: select the channel for mobile view, and press [Enter] to switch different channels.

MOBLE NETWORK:

Select different mobile network from the options of 3G, 2.5G and

2.75G, and press [Enter] to switch different network.

Page 23

2.2.2.5.5 SYSTEM MAINTAIN

Move the cursor to 【SYSTEM MAINTAIN】(Frame turns red means selected), and press

【

Enter】 to enter into system maintain setup interface.

AUTO RESET: When switch is on, you can setup the time for device to restart.

SYSTEM UPDATE:

Copy the update file to the root directory of the thumb driver, and insert it into USB 1.0, then press [Enter] to upgrade the firmware, and it will display the process of the system upgrading, as following:

DEFAULT SETTINGS: Restore all the settings as the factory setting.

2.2.2.5.6 PTZ SETUP

Move the cursor to【PTZ SETUP】（Icon highlighted when selected），press【Enter】to enter

into setting interface, you can setup the parameters for each channel separately.

CHANNEL: The channel of PTZ connected. PROTOCOL: select the protocol of different PTZ, there are two protocols to switch, and the

default is Pelco-D

Page 24

BAUD RATE: select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600 DATA BIT: there are 5,6,7,8 options to select, default setting is 8. STOP BIT:

there are 1and 2 to select, the default setting is 1.

VERIFY: there are None/Odd/Even/Mark/Space to select, the default setting is none. ADDRESS: Fill the code of respective PTZ

2.2.2.5.7 NETWORK SETUP

Move the cursor to [NETWORK SETUP] (icon thighlitend when selected), and press 【Enter】

to enter into setting interface .

TYPE: There are PPPOE, DHCP & Static three options.

●

STATIC

Select [Static] in the type, and press [Enter] to enter into the interface as followings

MEDIA PORT

transfers video data between client and device.

：：：：

WEB PORT: setup the port of IE browser via HTTP.

Page 25

IP ADDRESS: setup the IP address, and press [Enter], [+], [-] or number keys to change the value.

NETMASK:

press [Enter], [+], [-] or number keys to change the value.

GATEWAY: press [Enter], [+], [-] or number keys to change the value.

●

DHCP

Select the DHCP, and enter into the interface as followings.

MEDIA PORT

WEB PORT:

transfers video data between client and device.

：：：：

setup the port of IE browser via HTTP. PPPOE username and password: fill the username and password of the internet service offer, and apply it and reboot the system. After rebooting, the device will save it and set the PPPOE as default network type. If succeed, the IP address will be automatically config as dynamic IP of WAN.

●

PPPOE

Select the PPPOE, and enter the interface as followings

Page 26

MEDIA PORT

：：：：

transfers video data between client and device.

WEB PORT: setup the port of IE browser via HTTP. PPPOE username and password:

fill the username and password of the internet service offer, and apply it and reboot the system. After rebooting, the device will save it and set the PPPOE as default network type. If succeed, the IP address will be automatically config as dynamic IP of WAN.

DNS: press [Enter], [+], [-] or number keys to change the value. DDNS:

move the cursor to it and press [Enter] to enter into the interface as followings.

DDNS: There are [ON/OFF], and if there is a DDNS service, please setup it as ON. SERVICE: There are 3 serviceS to select, 3322, dyndns, perfecteyes. HOST NAME: Input the name of the host server. USERNAME: Input in the name of the user. PASSWORD: Input the password.

Page 27

3 IE OPERATION

3.1 FEATURE

Through the IE browser of OS and install the software, you are able to do the network operation remotely, which is much more convenient. DVR support C/S, B/S, and visit in LAN and WAN, also support IP and domain name visiting.

3.2 USER LOGIN

Input the DVR local IP in IE browser, when changed the port, you should add the port number after IP address, e.g. if DVR local IP is 192.168.3.97 (LAN) and the port is 8088, you should input http:// 192.168.3.97:8088. The default port is 8088, and directly input http://

192.168.3.97 to access the login interface as following,

Select English interface in the top left side. Input username and password to enter into the system. The username and passport is same as the ones set in DVR.

PASSWORD:

Administrator has all authorities, operator has limited authorities who they can only watch, playback, please change the unit No. and default password in time for system security.

NETWORK:

LAN/WAN

Remark: If you connect the device in WAN, the IP should be a public IP.

Page 28

3.3 OPERATION INTERFACE

There are Liveview, Playback and Setup options in the main interface, please press them to

access it.

3.3.1 LIVE

Click to enter into the interface as followings

3.3.1.1 PTZ CONTROL

Change the focus, preset aperture to control the PTZ.

Click to up/down/left/right control movement of the PTZ. When hold on the one direction key, the PTZ will keep circling as that direction after user press the stop key in the center of the wheel.

Page 29

3.3.1.1.1 ZOOM

Click to zoom in and out.

Click to focus

Click to change the size of aperture

3.3.1.1.2 PTZ PRESET

Setup preset point.

You can control it via the below three buttons:

3.3.1.2 PLAY

Move cursor to the icons, it will highlighted when selected

Open all windows.

Capture picture, save in local disk, system save default route is C:/DVR

Quickly start all channels’ recording video, here the left up corner of each channel

have normal recording video symbol

【R】

, click icon to switch between singal

screen /quad /nine /16 spllit .

Volumn adjust button

3.3.1.3 OTHER OPERATION

1. Select one channel at preview screen (the selected channel’s frame will be change to RED), double click left key, enter to the selected channel single screen display.

2. Click one Chanel via left key at preview screen, then click right key, will occur window shortcut Menu, see below picture

You can open, shut down and start this channel’s record via shortcut menu.

3.Click right key at one live view screen, click” open all windows” or “ close all windows”, will

Page 30

quickly open/close all windows.

3.3.2 REPALY

Click to enter into playback interface.

Click right up of calendar interface and , to setup the month for searching, click” refurbish”, at the calendar interface will display the recording information of current month

The highlighted date means that day have recording video, RED FRAME means the date is system date, click the date will search that days’ recording file list. For example, the above picture display 2008, Dec. 3rd,4th,5th,6th,8th,9th,10th,11th,12th,17th,18th have recording video, and system date is 18th, Dec, 2008, currently search date is 17th, Dec.

At the below of calendar select channel and type, click SEARCH, the result will display, as follow.

Page 31

Double click one item of listed recording video, the recording video will playback, meanwhile the

file icon will change to , and will occur the below picture play buttons:

The above purple progress bar shows download progress, green progress bar shows playback progress

Switch between pause/play

Stop play Fast play Slow play

Pause at next frame

Convert H.264 file to H.avi file, click this button access into file convert setting interface, as follow.

Page 32

SOURCE FILE: Click to setup the H.264 file to convert

DESTINATION FILE: Click to setup the directory for saving avi file

After setting, click , file convert start, the convert progress bar (see below picture) will see the progress of convert.

3.3.3 SETUP

Click to enter into setup interface, this interface include record, alarm, PTZ, network, setting and system information six menus.

3.3.3.1 RECORD