Page 1
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
1 -13
User Manual
For
F3R-H0401 (Bus Series)
Mobile Digital Video Recorder
Page 2
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
2 - 13
Notice
The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without any notice.
The purpose of this manual is to kindly aid the user for the operation for our MDVR. The user should
have a basic understanding of computer operation and basic knowledge of how to connect peripherals
and make some settings.
Copyright
Under copyright laws, the content of this manual may not be copied, photocopied, reproduced,
translated or reduced to any electronic medium or machine- readable form, in whole or in part, without
prior written consent of Streamax Technology Co., Ltd. Copyright
Page 3
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
3-13
Guarantee & Warnings
1) Electrical Apparatus Safety
All installation and operation should comply with local electrical safety norms.
2) Transportation
In the process of transportation, storage and installation, please avoid heavy stress, violent vibration,
impact and water splashing.
3) Installation
Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the
equipment before the MDVR installation is finished.
4) Requirements on Engineers & Technicians
All the work of checking and maintenance should be done by qualified technicians and engineers.
We do not undertake any responsibility caused by unauthorized modifications.
5) Requirements on Environment
The equipment should be installed and stored in a cool and dry place, away from direct sunlight,
flammable or explosive substances, etc. Keep gaps not less than 3cm around the device to facilitate
ventilation for cooling.
6) Accessories
Make sure to use accessories from the manufacturer recommended in the attachment.
Insulate circuit ground and metal shell for all the peripherals.
Before installation, please open the package and ensure that all parts are included.
If there are any problems, please contact us as soon as possible.
Page 4
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
4-13
1. Product characteristics
1.1. Overview
Streamax Bus series model F3R-H0401 is a functional Mobile Digital Video Recorder specially designed
for vehicle video surveillance and remote monitoring. It has a high-speed processor and embedded
operating system, combining with the most advanced H.264 video compression / decompression
technology, 3G/4G network, GPS positioning technology, as well as WIFI. It supports not only
multi-channel analog recording, automatic reporting stations, intelligent scheduling and 1080P HD video,
but also vehicle travel information recording and wireless data upload. With center software it also
achieves alarm linkage central monitoring, remote management and playback analysis. It is easy to use
with simple design, multi-function, superior anti-vibration, flexible installation and high reliability.
1.2. Features
1) All the modules are connected with exquisite connectors, supporting quick disconnection,
which is safe and easy to maintain.
2) Each module (including waterproof fan modules) when a failure occurs, the system
automatically detects and alarms.
3) Adopts explosion-proof and seal design for the outer shell.
4) Combines together three vibration-resistant technologies: mechanical anti-vibration, electronic
anti-vibration and software anti-vibration.
5) Supports DC8~36V wide voltage input, suitable for 12V and 24V vehicles.
6) Monitor video streams coherence.
7) Watermark technology: prevents data tempering and guarantees the video authenticity and
legal efficiency.
8) Dual SD cards recording.
1.3. Functions
1) Local recording and video playback: 1080P/720P/WD1/WHD1/WCIF/D1/HD1/CIF resolution
optional.
2) Automatic station report function.
3) Remote intelligent scheduling function: supports driver swipe card to sign in/sign out, operating
scheduling, remote scheduling and other functions.
4) Driving recording: provides statistics on speed, turning, brake, reverse, opening door, etc.
5) Network function: supports break point uploading continually, which can realize the remote
video surveillance, video download, remote alarming and network timing of the equipment, network
setting and remote upgrade, etc.
6) High-speed backup: support high-speed backup through USB2.0, as well as backup through
SD card.
7) User log: on-off status of the device, video loss, recording start time / end time, user log in / log
out, modification of the device parameters, checking the time, GPS status.
8) Import and export of the configuration file: thumb drive import/export device parameters.
Page 5
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
5-13
9) Device upgrade: supports local upgrade and remote upgrade.
10) Alarm linkage: supports linkage switch value output, image display, etc.
11) Storage formatting: formatting SD cards and external USB devices.
1.4. Specifications
Function Overview
Preview, Recording, Station report, Dispatching, Playback,
Network, Locating
System
OS
Linux 3.0.8
Control Mode
Easy Check, network, CP4
Hardware
CPU
Hi3520D @660MHz
RAM
512MB
ROM
32MB
Video
Input
4 channels AHD+1 channel IPC (1080P)
Output
1 channel
Total Resource
PAL:
(4x25)FPS 720P(AHD)+1080P@30FPS(IPC)
or (4x12)FPS 1080P(AHD)+1080P@30FPS(IPC)
NTSC:
(4x30)FPS 720P(AHD)+1080P@30FPS(IPC)
or (4x15)FPS 1080P(AHD)+1080P@30FPS(IPC)
Video Signal Standard
Electrical level: 1Vpp Impedance : 75Ω NTSC/PAL Optional
Audio
Input
5channels (1 channel IPC audio input)
Output
1channel
Audio Signal Standard
Electrical level: 2Vpp Input impedance: 4.7kΩ
Station report MP3
format
Sampling rate: 44.1KHZ
Bit rate: 128KB/S
Channel: 2 (dual channels)
Storage
Recording storage
2TB SSD+128GB SD card
or
2 x 128GB SD cards optional
Station report storage
Built-in 4 GB
Display
Display Split
1/4/9
OSD
GPS information, alarm, license plate, speed, date/time
Operation Interface
Semi-transparent GUI
Recording
Video/Audio
Compression
H.264/ADPCM
Image Resolution
PAL:
1080P,720P,WD1(928X576),WHD1(928X288),
WCIF(464X288),D1(704X576),HD1(704x288),
CIF(352x288);
NTSC:
1080P,720P,WD1(928X480),WHD1(928X240),WCIF
(464X240),D1(704x480),HD1(704x240),
Page 6
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
6-13
CIF(352x240);
Digital:1080P(1920X1080),720P(1280X720).
Image Quality
1-8 levels adjustable (1 is the best)
Recording Mode
Boot up/Manual/Schedule/Alarm
Pre-recording
0-60minutes
Post-recording
0-30 minutes
Mirror/Dual Recording
Support
Playback
Playback Channel
4 channel by local playback, single channel by PC
software, 4/8 channel playback
Search Mode
Date/time, channel, event
Network
3G/4G optional
TDD-LTE/FDD-LTE/EVDO/TD-SCDMA/WCDMA
WIFI
802.11b/g/n
Ethernet
Connect via 6 pin IPC
Locating
GPS
Location tracking, speed detection and time sync
Interface
USB
2 x USB2.0
SIM
1 x SIM slot
Serial ports
RS232 × 2, RS485 × 2
Sensor
8 inputs, 2 outputs
Speed
1 channel pulse speed detection
Intercommunication
Supports announcement inside/outside vehicle and IP
communication
Interface
Touch panel CP4 Optional
Power
Input
DC8-36V
Output
1A@12V, 1A@5V
Max Power
Consumption
30W
Standby Power
Consumption
≈0W
Physical
Characteristic
Dimension
(L × W × H)(mm)
248.7 x 175 x 68.6mm
Weight
1.3 Kg
Environment
Operating
Temperature
-40℃~ +70
℃
Operating Relative
Humidity
8%-90% (No Condense)
Page 7
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
7-13
1.5. System diagram
1.6. Dimension
Unit: mm
Page 8
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
8-13
1.7. Panel interface
Serial No.
Print
Description
1
USB
USB2.0 port（Type A）
2
PWR
Power LED
Page 9
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
9-13
3
REC
Recording LED
4
USB
USB LED
5
ERR
Error LED
6
ALM
Alarm LED
7
NET
Network LED
Rear panel:
Serial No.
Print
Description
1
Power
DC8-36V power input
2
Panel
Control panel (CP4)
3
USB
USB2.0 port (Type B/ to connect fire proof box)
4
Sensor
Sensor port
5
Serial
Serial port
6
AHD1~4
AHD A/V input1~4
7
IPC
6-core PON IPC (net port optional)
8
GPS antenna port
9
3G/4Gantenna port
10
WIFI antenna port
11
Debug port
Page 10
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
10-13
1.8. Hard disk installation (For SSD+SD card F3R)
1.9. Means to get SD-SIM (For SSD+SD card F3R)
Page 11
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
11-13
1.10. Means to get SD-SIM (For dual SD cards F3R)
1.11. DEFINITION AND PICTURES OF EXTERNAL CABLES
Alarm cable definition
Serial cable definition
Page 12
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
12-13
2. FAQ
1) The system can’t start?
Usually this problem results from the incorrect power connection. Please follow below steps to
check the power connection:
1. Check the input power, whether the power wire is connected correctly, whether the ground wire is
connected back to the battery, and whether the fuse on the power wire is in good condition.
2. Check whether the ACC signal wire input to the power is with voltage higher than 7 V.
3. Check whether the device key is closed.
2) The MDVR restarts uninterruptedly?
Please follow below steps to check it:
1. Check whether the voltage of MDVR is insufficient. If the voltage is less than the start-up voltage of
the device, the device would always restart.
2. The problem in hard disk/SD card may cause the failure to start. Take off the storage part and check
whether it is broken down.
3) The device can’t record?
Usually this problem results from the storage disk or camera. Please follow below steps to check it:
1. Check whether the storage disk is installed, whether it is in good contact, and whether the disk can
be read normally in computer.
2. Check whether the storage disk is formatted. The storage disk should be formatted before normally
storing record files.
3. Check whether there is video signal input into the device from camera, and whether there is
video/image on the screen.
4) There is no voice in record file?
Please follow below steps to check it:
1. Check whether there is an external pickup, or whether the camera features with the function of
audio collection.
2. Access to Video Channel Settings, check if Audio is set on.
3. There must be video input into the channel for recording and it must record normally.
5) The GPS works abnormally?
Please follow below steps to check it:
1. Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS antenna
holder behind the host device.
2. Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which may
cause it not to receive signals.
3. Environmental influence such as tree shades, being inside tunnel, driving near tall building or
elevated roads, thunderstorms or other weather influence, etc. can also cause signal loss or
receiving wrong signals.
6) The device can’t shutdown in ignition switch mode?
Please follow below steps to check it:
1. Check if the ACC line connection mode is correct; and check whether there is voltage on ACC
yellow line when the key is turned off.
2. If the device has been set with schedule recording, it can’t shutdown if it is still during recording time
Page 13
User manual for F3R-H0401
For more information, please visit our website www.en.streamax.com
13-13
of the task table.
7) How to install the WIFI antenna?
The antenna must be installed on unobstructed place of the roof, and be fixed with glue.
8) The device cannot be shut down when in ignition ON/OFF mode.
Check if the ACC signal wiring is correct and if there is voltage for ACC signal line after the key is
turned off .
If you have set timing recording, and at the current time it is still in task recording, the device may be
impossible to be shut down.
9) GPS anomaly.
Check if the GPS antenna is properly installed. There is silkscreen GPS identification on the GPS
antenna pedestal on the back of the MDVR device. Check if the antenna connector is blocked and
make sure the antenna connector not be covered by other things.
Trees block, being inside the tunnel, driving near tall buildings or viaduct, thunderstorms and other
environmental effects may also cause to receive no GPS signal or error signal.
10) No voice in video files.
See if there is an external microphone, or if the camera cannot capture audio;
Enter into the video channel settings, then check if the audio is open;
Ensure video input and normal recording, on which the audio recording channels must be based.
11) The device doesn’t record.
Make sure the storage part is installed and of fine contact, the data can be read on PC, and the
storage device is not formatted.
Check if there are video signal input to the main device, and whether there are video images in the
channel pictures.
12) Why has the MDVR device always been in a state of restart?
Check whether the MDVR device voltage is insufficient. If the device voltage does not reach the
start voltage, the device will restart.
Hard disk or SD card may cause the MDVR device unable to start. You need to remove the storage
device and then boot up to verify whether it is caused by the storage device.
13) Why the MDVR device cannot start?
Check the device input power to see if the power wiring is correct, if there is ground wire connected
back to the battery, and if the fuse of the power wire is n good condition;
Check whether there is voltage(more than 7V) on power input ACC signal wire;
Check whether the hard disk key is turned off.
14) What is the log in user name and password for new device?
The default user name and password are both “admin”. The device password can be set as empty.
15) In the ON/OFF of basic settings, the low voltage protection is 8V, why?
After testing, when the battery is lower than 8V, the voltage will lower down quickly. Therefore the
lowest voltage is set to be 8V. When it is lower than 8V, the MDVR device will recognize it as
external power-off and then enter into shutdown state.
Loading...