Page 1
Coda II
Coda II 500 watt Cyc Lights are designed for both
top and bottom cyclorama lighting applications.
Coda II is modular in design and units may be
linked together to form up to 4-compartment,
4-color units. Each light is packed with a single
yoke and an expansion yoke for multi-unit
applications. All Coda IIs include a color frame.
Preliminary Data Sheet Coda II Lighting
Strand Cyclorama Lighting
Features
• Exceptionally even high-intensity
beam distribution
• Up to 4 Coda IIs may be linked to form a single
multi-cell unit. Single-sided hanging hardware is
included with each light
Weights & Dimensions
Weight 7.28 lbs 3.3 kgs
Height 12” 305 mm
Width 7.9” 200 mm
Length 12.2” 310 mm
Color frame size 9¾” x 8½” 248 x 216 mm
Coda II cyc light 500W
• May be used for bottom or top light applications
• ETL, cETL listed, CE marked
Page 2
Photometric
Readings taken
with photocell
facing the Coda II
units.
Coda II used as a toplight mounted 18’ (5.5m) above stage level.
Coda II used as a groundrow standing on stage at 45° tilt.
Readings taken
with photocell
facing the Coda II
units.
6’ (1.83m) from backdrop. 6’
(1.83m) center-to-center spacing,
continuous run 500W lamps, FDN.
35
48
55
55
55
55
55
54 FC
51
48
45
37
30
3¼’ (1m) from backdrop. 3¼’ (1m)
center-to-center spacing,
continuous run 500W lamps, FDN.
25
29
33
43
54
74
102 FC
136
164
190
181
188
178
5’ (1.5m) from backdrop. 5’ (1.5m)
center-to-center spacing,
continuous run 500W lamps, FDN.
65
80
93
93
93
93
92 FC
85
71
56
45
37
30
Coda II Toplight Coda II Groundrow
Mounting Instructions:
Because the housings are symmetrical, it
is necessary to observe the direction of
the reflector when installing the units
either as a top light or a groundrow.
Data
Preliminary Data Sheet Coda II Lighting
Strand Cyclorama Lighting
Ordering Information
Cat No Description
14010 Coda II cyc light 230 volt w/ colour frame,
no connector
14111 Coda II cyc light 120 volt w/ color frame & C-clamp,
no connector
Optional accessories
18129 Coda II wire guard (spare)
18130 Coda II color frame (spare)
82003 Safety Cable 19 Inch, light duty
82010 Hook clamp
82019 C-clamp (spare) (Standard - for SL, Fresnelite,
Nodes and Coda II)
Lamps
FDN Coda II Lamp 500W 120V
K1 Coda II lamp 500W 230 V
Environmental Data
Max operating
ambient temperature: 110°F
IP rating: IP20
Strand Lighting, Inc.
6603 Darin Way
Cypress, CA 90630
Tel: (714) 230-8200
Fax: (714) 899-0042
Strand Lighting Europe Limited
Unit 2 Royce Road, Fleming Way
Crawley, West Sussex RH10 9JY
Tel: + 44 (0) 1293 554010
Fax: + 44 (0) 1293 554019
Strand Lighting Asia Limited
20/F Delta House,
3 On Yiu Street
Shatin, N.T. Hong Kong
Tel: +852 2757 3033
Fax: +852 2757 1767
Electrical & mechanical data
Supply voltage: 120/220V 50/60Hz
Max lamp
per compartment: 500W
Power cable: Individual compartments fi tted
with 3’ (1 m) cable.
Coda II can be supplied to special order with 9- pin
connector for 4-circuit operation.
Standards
compliance: ETL, cETL, CE
Construction: Formed sheet steel assembled with machine
threaded screws and rivets for high strength
and light weight. Black powder coated epoxy
paint fi nish
Refl ector: Asymmetric multi-curve refl ectors of high
refl ectivity textured aluminum for smooth
cyclorama illumination.
Mounting/ Flat steel yoke assembly
suspension:
Operational data
Lamp access: Through front of open face of fi xture
after color frame and wireguard are
removed.
Tilt adjustment: Tilt angle is set by heat-insulated
lock handle.
www.strandlighting.com
© Philips Group 2008
All rights reserved.
The Company reserves the right to make
any variation in design or construction to
the equipment described. E&OE
Loading...