Page 1
Strand Lighting
PRODUCT DATA
CD 80 Supervisor Conversion Kit
Conversion kit comprising electronics chassis and fan assembly to upgrade existing CD80
Standard or CD80AE dimmer racks to the advanced,all digital specification of the latest
Supervisor dimmers.
The conversion kit is designed to be a direct replacement of the existing electronics and
fan assemblies with the new electronics module.
Cat.No. Description
76463 CD80 to CD80SV conversion Kit (120V)
76464 CD80 to CD80SV conversion Kit (220V-240V)
Control Electronics Specification
General
Processor control electronics on one plug-in module
Completely digital with no analog ramp circuits
Real time date and time clock for status log reporting
6 button keypad to program all rack functions on processor module
2 line by 8 character back lit LCD display on processor module
6 status LEDs on processor module
Mux input A ok
Mux input B ok
Electronics power ok
Processor self test ok
Dimmer module error
Languages
English;Spanish; French;German
Connector on rack front for configuration,control and Operating Software
upgrades
Local switch for single rack PANIC function
Control Inputs
Dimmer control
Mux A: DMX512 or AMX192 or D54 or SMX
Mux B: DMX512 or SMX
Analog: 32 inputs,+/-10V
Remote control (system wide)
SWC™ for remote preset panels and hand held programmer unit
Outlook™ for integrated architectural control
Reporter™ for remote configuration and rack status reporting from PC
Local control (per rack)
Rack processor keypad and LCD display for full functionality
Switch for rack PANIC control
RS232 port for local PC control
Rack configuration using the Reporter PC program
Rack preset recording and playback
Librar y and backup rack set-up stor age on PC
Operating software upgrades
External switch contacts
Select Mux A or Mux B (with appropriate control logic mode)
Enable or disable PANIC
SWC preset 1 GO/SWC preset 0 GO/Next SWC preset
http://www.strandlight.com
CD80 Supervisor
Conversion Kit
● Upgrades CD80 Standard and CD80AE racks to CD80SV
operation
● Provides all CD80SV functionality except dimmer reporting
function and dual processor option
● Extensive security features
●“Panic”function, to bring selected dimmers to full
if processor fails, and can be actuated manually or automatically (eg.by a fire alarm system)
● Line voltage regulation to minimize light output changes
when the input voltage fluctuates
● Extensive input control capabilities,ensuring system design
flexibility and ability for future system additions and upgrades
● Opto-isolated Mux A and Mux B inputs provided
with individual assignment patches
● Up to 32 analog 0 - 10V inputs per rack patchable to any
dimmer circuit(s) plus 12 0-10V DC analog outputs
● 99 System Wide Control (SWC™) memories for additional
preset and backup use, using simple “snapshot”recording
● 16 room by 8 preset Outlook™ architectural lighting presets
for auditorium, front of house and other control
● Direct control of channels and presets by hand held remote
programmer with specialised rigger s functions
● Built-in library of fixed and custom dimmer curves,accessible
per dimmer
● Smooth 16 bit digital fade processing
● Supports dimmer configuration via Reporter PC software
Page 2
Shipping Data
Packed Weight
Packed Volume
PAGE 2 CD80 SV Retro Kit © Strand Lighting November 1996
Control Electronics Specification - continued
Control Outputs
96 dimmer control signals
12 analog +10V output signals
Variable or continuous fan speed control to minimise acoustic noise
Electrical
Signal wire termination at one easily accessible point
Signal wire termination on two-part plug-in connectors
Loop-out connectors for daisy chaining signals between racks
Status LEDs
5V opto isolation power ok
Auxiliary power supply ok
PANIC active
Rack overheat
Presets
99 user programmable SWC presets,plus preset 0 (blackout)
Snapshot recording of SWC presets from any remote preset sta-
tion,hand held programmer or Reporter Program
Individual SWC preset crossfade time recording
One user assignable SWC backup preset on loss of both Mux
inputs
16 rooms,each with 8 Outlook presets,plus on/off, per room
Control Electronics - Performance
Fast dimmer update rate,16 ms (60 Hz) or 20 ms (50 Hz)
Response time to signal changes,16 ms (60 Hz)
or 20 ms (50 Hz)
Line regulation maintains dimmer output levels to within +/- 1V of
set output within the range of the control electronics (90V to 240V
nominal),providing that the set level is not higher than the power
input voltage less the dimmer voltage loss.
Automatically compensates for frequency variations
45 Hz to 62 Hz.
Up to 8 point interpolation between DMX values to smooth console fade.
Line and load regulation acts on each individual dimmer and maintains dimmer curve parameters (set curve,max level and min level)
Control Electronics - Programmable Features
Patching
User programmable patches for Mux A and B inputs
PANIC Function
Any of the 96 dimmer and 12 analog outputs may be user selected
to go to fully ON on activation of the PANIC switch or an external
switch
Activation is by hardware only
Optional PANIC power supply for automatic PANIC ON upon
removal of processor module
Thermal Control
All power components convection cooled with fan assist
High capacity heat sink in each module
3 fans for redundancy in case of one fan failure
Over temperature warning on rack,remote console or PC
Over temperature warning forces cooling fans on at full
Over temperature shut down at 5°C above warning level
PANIC operation forces cooling fans on at full
Opto-Isolation
All digital inputs are opto-isolated to 2,500V RMS
Mux A and Mux B - DMX512,SMX
SWC input
Outlook input
External switch inputs
Crate Specification
Electronics and fan modules designed to replace existing standard or AE trays
Mechanical
Max ambient temperature 40°C
Convection cooled with fan assist
Two low noise fans
Variable or continuous fan speed control for minimum acoustic noise
Crate Dimensions and Weights
Electronics Crate Fan Crate
Height 3.75" (95mm) 10.8" (275mm)
Width 20.5" (520mm) 24.5" (622mm)
Depth 15" (380mm) 5.5" (140mm)
Weight 28.5lb (13kg) 16.5lb (7.5kg)
32lb (14.5kg) 19.5lb (9kg)
2.6cuft (.074m
3
)
2.6cuft (.074m
3
)
User programmable rack start address with following dimmers
automatically sequenced
Free format patching - any dimmer to any Mux input and address
for total flexibility
User programmable 5-digit ID for sequential numbering of systems
larger than 512 circuits
Strand Lighting
Patch any analog 10V input to any circuit(s)
“Room” to channel to dimmer patch for Outlook
architectural control
Dimmer Characteristics
Set max output voltage,50V to 250V in 1V steps
Set min output level,0 to 99%
Override dimmer level,0 to full
Library curves
Square;S-curve; Linear power output
User programmable curves
Non Dim - trigger level 0 to 99%
Fluorescent - electronic ballast
Fluorescent - magnetic ballast
5 user defined curves via Reporter
Response time
Fast (30 ms)
Normal (100 ms)
Slow (300 ms)
Security Features
Set-up Data Storage
Non-volatile storage of set-up data on removable memory pcb
Memory pcb can be moved on exchange of processors
Set-up data can be saved and stored using the Reporter program
Mux Fail Options
Los Angeles: Strand Lighting Inc , 18111 South Santa Fe Avenue,
Toronto: Strand Lighting Ltd, 2430 Lucknow Drive No 15,
Hong Kong: Str and Lighting Asia Limited, 7/F Corporation Square,
London: Strand Lighting Ltd, Grant Way, Isleworth, Middlesex,
ALSO
FACILITIES IN: NEW YORK • ROME • WOLFENBÜTTEL • STOCKHOLM • BRUSSELS
PO Box 9004,Rancho Dominguez, CA 90221 USA.
Tel: (310) 637 7500 Fax: (310) 632 5519
Toll Free Tel: 800 733 0564 Toll Free Fax:800 775 LEKO (5356)
Mississauga, Ontar io, Canada.
Tel: (905) 677 7130 Fax: (905) 677 6859
8 Lam Lok Street, Kowloon Bay,Kowloon, Hong Kong.
Tel: 852 2757 3033 Fax: 852 2757 1767
TW7 5QD,United Kingdom.
Tel: +44 (0)181 560 3171 Fax: +44 (0)181 568 2103
L5S IV3.
Hold forever (status quo)
User programmable “hold” period before fade to user assigned
SWCPreset
The Company reserves the right to make any variation in design or construction to the equipment
described. Strand™ and Strand Lighting™ are trade marks of the Strand Lighting Limited and Strand
Lighting Inc Group of Companies.
© Copyright Strand Lighting Limited November 1995
Loading...