StoveTop FireStop
FOR MICROWAVES & CABINETS
MICROHOOD
• Designed to mount
under microwaves, or
low cabinets over the
stove (15-27” clearance)
• Deploys automatically
when the flame from
a cooking fire comes
in direct, sustained
contact with the fuse
• One pair protects
a typical residential
4-burner stove
• 6-year effective life
• For residential, indoor
kitchens
• No maintenance or
inspections needed
• Alternative mounting
options available
• Automatic supression
MICROHOOD
StoveTop FireStop Microhood is designed
ADHESIVE MOUNTING KIT
Alternative mounting
solution for Microhood
devices where the
backsplash material is not
conducive to drilling holes.
to attach to the back wall of your kitchen,
directly underneath the microwave. Unlike the
Rangehood version, which features a single
pair of canisters, each Microhood housing has
2 canisters inside it, providing a designated fire
suppressor over each burner on your stove.
The StoveTop FireStop Microhood model was
designed specifically for kitchens with over-thestove microwaves or limited space above the
cooking surface due to shelves or cabinets.
EXTENSION BARS
Extend the rear
Microhood canister
over the rear burner
on the stove.
* Free upon request
One night back in 1972, our
company’s founders were attending
a neighborhood block party when
they overheard someone talking
about a recent grease fire. The
neighbor stated, “I got distracted
and left the stove on. Sure, I had a
fire extinguisher and baking soda
in the fridge. But since I wasn’t in
the kitchen to use them, neither did
me any good!” Hearing this story
became a revelation, and launched
the design of the simple, automatic
fire suppressor that is today known
as StoveTop FireStop.
PROVIDING SIMPLE,
AUTOMATIC COOKING
FIRE SUPPRESSION IS
SOMETHING WE TAKE VERY
SERIOUSLY.
StoveTop FireStop has protected
individuals and families from the
deadly effects of cooking fires since
1972, and we want to do the same
for you and your family.
MODEL COMPARISON FOR MICROWAVE & CABINETS
Microhood STFS Plus LC
PART NUMBER
HOOD TYPE
CLEARANCE
AUTOMATIC
FUNCTION
ALERT
UNIT OF SALE
EFFECTIVE LIFE
POSITIONING
MOUNTING*
NOTES
* Alternative mounting kits available for purchase online.
677-1 (Black), 677-2 (White) 679-LC-3
Protects kitchens with traditional microwaves or cabinets above the cooking
27-35 inches 15-32 inches
Works automatically. Suppresses fires even when no one is in the kitchen
Powder is released onto fire only with direct, sustained contact with a flame
Makes a “POP!” sound upon activation
Sold by the pair to protect a residential, four-burner cooktop
Cooking fire protection for up to six (6) years
Position one unit directly above
front and back burner on each
side of cooktop. The center of the
rear canister must be over the rear
Included wall fasteners for dry-
wall or stud installation. Optional
adhesive pads or material-specific
Best use for stoves with low-
mounted cabinets or microwaves
We invented the technology, and
have been the market leader for
Plastic housings should rest
flush with the lower front edge of
microwave or cabinet door
burner.
hardware, not included
over 40 years
surface
Position each canister at the midpoint
between the center of the front and back
burner on each side of cooktop surface
Attaches by a pre-installed magnet to
underside of ventilation hood
Designed specifically for stoves with
New omnidirectional ramp increases
powder distribution on the cooking
Improved design and color to match
microwaves
surface
your designer hood’s finish
Originally founded in 1963 by Bob
and Della Williams, the company
now known as WilliamsRDM has a
knack for solving complex problems
with simple solutions.
For more information or to purchase, contact us below:
a division of WilliamsRDM
200 Greenleaf Street
Fort Worth, TX 76107
866 616-7976 to ll fr ee
STFS.com
© 2018 WilliamsRDM, Inc. All Rights reserved. WilliamsRDM, the WilliamsRDM logo, StoveTop FireStop, the StoveTop FireStop logo,
Rangehood, Microhood, STFS Plus, STFS Plus logo are either trademarks or registered trademarks of WilliamsRDM, Inc. These marks may
not be used without the expressed written consent of WilliamsRDM, Inc.