The use of the products described in these materials is subject to the then current end-user license
agreement, which can be found at the Stonesoft website:
www.stonesoft.com/en/support/eula.html
Third Party Licenses
The Stonesoft software includes several open source or third-party software packages. The appropriate
software licensing information for those products can be found at the Stonesoft website:
www.stonesoft.com/en/customer_care/support/third_party_licenses.html
U.S. Government Acquisitions
If Licensee is acquiring the Software, including accompanying documentation on behalf of the U.S.
Government, the following provisions apply. If the Software is supplied to the Department of Defense
(“DoD”), the Software is subject to “Restricted Rights”, as that term is defined in the DOD Supplement to
the Federal Acquisition Regulations (“DFAR”) in paragraph 252.227-7013(c) (1). If the Software is supplied
to any unit or agency of the United States Government other than DOD, the Government’s rights in the
Software will be as defined in paragraph 52.227-19(c) (2) of the Federal Acquisition Regulations (“FAR”).
Use, duplication, reproduction or disclosure by the Government is subject to such restrictions or successor
provisions.
Product Export Restrictions
The products described in this document are subject to export control under the laws of Finland and the
European Council Regulation (EC) N:o 1334/2000 of 22 June 2000 setting up a Community regime for the
control of exports of dual-use items and technology (as amended). Thus, the export of this Stonesoft
software in any manner is restricted and requires a license by the relevant authorities.
General Terms and Conditions of Support and Maintenance Services
The support and maintenance services for the products described in these materials are provided pursuant
to the general terms for support and maintenance services and the related service description, which can be
found at the Stonesoft website:
www.stonesoft.com/en/customer_care/support/
Replacement Service
The instructions for replacement service can be found at the Stonesoft website:
www.stonesoft.com/en/customer_care/support/rma/
Hardware Warranty
The appliances described in these materials have a limited hardware warranty. The terms of the hardware
warranty can be found at the Stonesoft website:
www.stonesoft.com/en/customer_care/support/warranty_service/
Trademarks and Patents
The products described in these materials are protected by one or more of the following European and US
patents: European Patent Nos. 1065844, 1189410, 1231538, 1231754, 1259028, 1271283, 1289183,
1289202, 1304830, 1304849, 1313290, 1326393, 1361724, 1379037, and 1379046 and US Patent
Nos. 6,650,621; 6,856,621; 6,912,200; 6,996,573; 7,099,284; 7,127,739; 7,130,266; 7,130,305;
7,146,421; 7,162,737; 7,234,166; 7,260,843; 7,280,540; 7,325,248; 7,360,242; 7,386,525;
7,406,534; 7,461,401; 7,573,823; 7,721,084; and 7,739,727 and may be protected by other EU, US, or
other patents, or pending applications. Stonesoft, the Stonesoft logo and StoneGate, are all trademarks or
registered trademarks of Stonesoft Corporation. All other trademarks or registered trademarks are property
of their respective owners.
Disclaimer
Although every precaution has been taken to prepare these materials, THESE MATERIALS ARE PROVIDED
"AS-IS" and Stonesoft makes no warranty to the correctness of information and assumes no responsibility
for errors, omissions, or resulting damages from the use of the information contained herein. All IP
addresses in these materials were chosen at random and are used for illustrative purposes only.
Thank you for choosing a Stonesoft™ appliance. This guide provides
instructions for the initial hardware installation and the maintenance of
the FW-105 Series appliances. See Product Documentation (page 5) for
information on other available documentation.
The use of the appliance is subject to the acceptance of the End User
License Agreement, which can be found at the Stonesoft website.
Contents
Installation Procedure .................. 4
Product Documentation ................ 5
Safety Precautions ....................... 5
Unpacking the Appliance .............. 7
Front Panel .................................. 8
Back Panel .................................. 10
Connecting Antennas and Cables .. 11
Initial Configuration ...................... 13
Wall-Mounting .............................. 24
Maintenance Operations............... 25
Conformity Marks......................... 28
Compliance Information................ 28
Disposal Instructions ................... 30
Caution – Never open the covers of the appliance! There are no user
serviceable parts inside. Opening the covers may lead to serious
injury and will void the warranty. Read the Safety Precautions (page 5)
before you conduct any installation or maintenance operations on the
appliance.
Introduction 3
Installation Procedure
Note – You must have a working Management Center on a separate
server to bring the appliance(s) operational. See the Stonesoft Management Center Installation Guide.
To install the appliance
1.Configure the Firewall element in the Management Client, and
save or upload the initial configuration. See the Firewall/VPN
Installation Guide.
• You can upload the initial configuration to the Stonesoft
Installation Server in preparation for plug-and-play configuration.
• Alternatively, you can save the initial configuration on a USB
stick.
2.If the initial configuration is on a USB stick, insert the USB stick in
a USB port on the appliance.
3.(Models with wireless support) Connect the antennas to the
appliance as described in Connecting the Antennas (page 11).
4.Connect the cables to the appliance (see Connecting the Cables
(page 11)). The appliance starts up and the initial configuration is
transferred to the appliance.
• If the initial configuration has been uploaded to the Stonesoft
Installation Server, the appliance automatically connects to the
Installation Server, and the initial configuration is transferred
from the Installation Server to the appliance.
• If the initial configuration is on a USB stick, the initial
configuration is automatically imported from the USB stick to the
appliance.
See Initial Configuration (page 13) for more information on the
configuration methods.
4 Installation Procedure
Product Documentation
Press F1 in any Management Client window to view the Online Help.
All PDF guides are available:
• On the Management Center DVD (in the Documentation folder)
• At the Stonesoft website at http://www.stonesoft.com/en/support/
technical_support_and_documents/manuals/.
Install the free Adobe Reader program to view the PDF documents
(available at www.adobe.com/reader/).
Safety Precautions
The following safety information and procedures must be followed
whenever working with electronic equipment. However, please be
advised that Stonesoft Appliances are not end-user serviceable, and you
must never open the appliance covers for any reason. Doing so may lead
to serious injury and will void any hardware warranty that may be
associated with your appliance.
Electrical Safety Precautions
Basic electrical safety precautions should be followed to protect yourself
from harm and the appliance from damage:
• Be aware of the locations of the power on/off switch as well as the
room's emergency power-off switch, disconnection switch, or
electrical outlet. If an electrical accident occurs, you can then quickly
cut power to the system.
• Do not work alone when working with high voltage components.
• Use only one hand when working with powered-on electrical
equipment. This is to avoid making a complete circuit, which will
cause electrical shock. Use extreme caution when using metal tools,
which can easily damage any electrical components or circuit boards
they come into contact with.
• Do not use mats designed to decrease electrostatic discharge as
protection from electrical shock. Instead, use rubber mats that have
been specifically designed as electrical insulators.
Product Documentation 5
• The power supply cord must include a grounding plug and must be
plugged into a grounded electrical outlet.
Caution – Never open the appliance covers! There are no user
serviceable parts inside. Opening the covers may lead to serious
injury and will void the warranty.
General Safety Precautions
Follow these rules to ensure general safety:
• Keep the area around the appliance clean and free of clutter.
• We recommend using a regulating uninterruptible power supply (UPS)
to protect the appliance from power surges, voltage spikes and to
keep your system operating in case of a power failure.
WLAN Precautions
• Data traffic by a wireless connection may allow unauthorized third
parties to receive data. Take the necessary steps to secure your
radio network. See www.wi-fi.org for information on securing your
WLAN.
• National restrictions and requirements for authorization may apply to
wireless devices. Check the latest status of national regulations with
the local authorities.
Operating Precautions
Care must be taken to assure that the cover is in place when the
appliance is operating to ensure proper cooling. If this rule is not strictly
followed, the warranty may become void. Do not open the power supply
casing. Power supplies can only be accessed and serviced by a qualified
technician of the manufacturer.
Operating and Storage Temperatures
The allowed operating temperature of the appliance is +5...+40ºC. The
allowed storage temperature is -20...+70ºC. Do not operate or store the
appliance in temperatures outside these limits.
6 Safety Precautions
Lithium Battery Precautions
Caution – Do not change the battery; the battery must be replaced by
authorized service personnel only. Danger of explosion if battery is
incorrectly replaced. Replacement battery must be same or equivalent
type recommended by the manufacturer. Used batteries must be
discarded according to the manufacturer’s instructions. Shortcircuiting the battery may heat the battery and cause severe injuries.
For California:
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
This notice is required by California Code of Regulations, Title 22,
Division 4.5, Chapter 33: Best Management Practices for Perchlorate
Materials. This product/part includes a battery that contains Perchlorate
material.
Power Supply Precautions
Caution – Do not change the power supply. The warranty is only valid
in conjunction with the original Stonesoft appliance power supply.
Unpacking the Appliance
Inspect the box the appliance was shipped in and note if it was
damaged in any way. If the appliance itself shows damage, file a damage
claim with the carrier who delivered it. Confirm that the Stonesoft antitamper tape on the appliance is intact.
Unpacking the Appliance 7
Front Panel
Power connector
(Left to right) Activity, DSL,
and Power indicators
(Some models)
DSL port
Console port Ethernet ports
Two USB
ports
The indicators in the front panel provide you with critical information
related to different parts of the system. The front panel indicator lights
are explained below.
On some FW-105 Series appliances the Power indicator is on the back
panel. See Back Panel (page 10).
8 Front Panel
Disk Activity, DSL and Power Indicators
ActivityLink
Table 1 Disk Activity, DSL, and Power Indicators
IndicatorStatusExplanation
ACTGreenA modem connection is up.
DSLGreenA cable is plugged in to the DSL port.
PWRGreen
Power is being supplied to the system's
power supply unit.
Port Indicators
Table 2 Port Indicators
IndicatorStatusExplanation
ActivityBoth indicators are unlitNo link.
Link ok.
LinkBoth indicators are lit
Activity indicator blinks on
activity.
Front Panel 9
Back Panel
(Some models) Power indicator
(Some models) Antenna connectors
CompactFlash card
The Power indicator is on the back panel on some FW-105 Series
appliances.
Table 3 Power Indicator
IndicatorStatusExplanation
PWRGreen
Power is being supplied to the system's
power supply unit.
10 Back Panel
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.