Page 1
Notebook
User Guide
1
Page 2
Notebook User Guide
Copyright©2007
All Rights Reserved - Printed in Taiwan
Notebook Computer User Guide
Original Issue: 2007/11
This manual guides you in setting up and using your new notebook computer.
Information in this manual has been carefully checked for accuracy and is
subject to change without notice.
No part of this manual may be reproduced, stored in a retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopy,
recording or otherwise, without prior written permission.
Trademarks
Product names used herein are for identification purposes only and may be the
trademarks of their respective companies.
Microsoft®, Windows XP®, Windows MCE®, Windows Vista®, and
Windows Sound System are trademarks of Microsoft Corporation.
Intel ®, Intel ® Celeron® M, Intel ® Core
TM
2 Duo, Intel ® HD Audio
(Azalia) are registered trademark of Intel Corporation.
All other brands or product names mentioned in this manual are trademarks or
registered trademarks of their respective companies.
2
Page 3
Notebook User Guide
European Notice
For the following equipment: Notebook PC
Is herewith confirmed to comply with the requirements set out in the
Council Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility (89/336/EEC), Low voltage
Directive (73/23/EEC) and the Amendment Directive
(93/68/EEC), the procedures given in European Council Directive
99/5/EC and 89/3360EEC.
The equipment was passed. The test was performed according to the
Following European standards:
EN 300 328-2 V.1.2.1 (2001-12)
EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09)
EN 50371: 2002
EN 55022: 2001
EN 55024: 2001
EN 60950: 2000
EN 61000-3-2: 2000
EN 61000-3-3: 1995 + A1: 2001
802.11b Restrictions:
3
Page 4
Notebook User Guide
- European standards dictate maximum radiated transmit power of 100mW
EIRP
and frequency range 2.400-2.4835GHz;
- In France, the equipment must be restricted to the 2.4465-2.4835GHz
frequency range and must be restricted to indoor use."
For DVD Players with both 525p and 625p progressive
scan outputs:
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN
THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER,
PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.’
“This product incorporates copyright protection technology that is protected
by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.”
“U.S. Patent Nos. 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.”
4
Page 5
Notebook User Guide
About Your Notebook Computer
Thank you for purchasing your new Notebook.
This notebook incorporates the latest technologies available in
the notebook industry.
Your new notebook computer not only operates today’s
multimedia applications but also is also ready for tomorrow’s
exciting new software.
This Notebook offers the freedom, flexibility and functionality
that users require.
5
Page 6
Notebook User Guide
About Your User Guide
Welcome to your Notebook User Guide.
This manual covers everything you need to know about how
to use your new Notebook computer. This manual also
assumes that you know the basic concepts of Microsoft®
Windows® and how to use a P.C.
This manual is divided into five chapters.
Chapter 1 Presents an introduction on your computer
features.
Chapter 2 Provides step-by-step instructions to help you
begin using your notebook as quickly as
possible.
Chapter 3 Describes how to operate the standard features
of your computer.
Chapter 4 Illustrates how to connect external device to
your computer.
Chapter 5 Offers instructions on how to care for and
maintain your notebook.
6
Page 7
Notebook User Guide
Table of Contents
ABOUT YOUR NOTEBOOK COMPUTER..........................................5
ABOUT YOUR USER GUIDE.................................................................6
1 INTRODUCTION.............................................................................11
1.1 FEATURE HIGHLIGHT..................................................................... 12
1.2 UNPACKING THE COMPUTER .........................................................14
1.3 THE INSIDE OF THE NOTEBOOK ..................................................... 15
Notebook Status Icons .................................................................. 17
The Function of Easy Buttons....................................................... 19
1.4 THE FRONT SIDE OF THE NOTEBOOK............................................. 21
1.5 T
HE REAR SIDE OF THE NOTEBOOK...............................................21
1.6 T
HE LEFT SIDE OF THE NOTEBOOK................................................23
1.7 THE RIGHT SIDE OF THE NOTEBOOK.............................................. 24
1.8 T
HE UNDERSIDE OF THE NOTEBOOK.............................................. 26
1.9 N
OTEBOOK ACCESSORIES.............................................................. 28
2 GETTING STARTED ...................................................................... 31
2.1 USING THE BATTERY PACK ........................................................... 32
2.2 CONNECTING THE AC POWER SOURCE.......................................... 34
2.3 STARTING YOUR COMPUTER .........................................................36
2.4 ADJUSTING THE DISPLAY CONTROLS ............................................36
2.5 TURNING OFF YOUR COMPUTER.................................................... 37
3 USING YOUR NOTEBOOK...........................................................39
3.1 UNDERSTANDING THE KEYBOARD FUNCTIONS.............................. 40
Basic Keyboard Functions ........................................................... 42
Cursor Control Keys..................................................................... 43
Screen Control Keys..................................................................... 44
7
Page 8
Notebook User Guide
Windows Hot Keys........................................................................ 44
Special Function Keys.................................................................. 44
3.2 USING THE TOUCHPAD POINTING DEVICE....................................... 45
3.3 CONFIGURING YOUR SCREEN DISPLAY ......................................... 47
Possible Display Configurations.................................................. 47
3.4 KNOWING THE POWER SAVING FEATURES .................................... 49
3.5 WORKING WITH THE BUILT-IN HDD............................................... 50
3.6 HOW TO ACCESS THE OPTICAL DRIVE........................................... 51
3.7 EXPRESSCARD............................................................................... 52
What is ExpressCard ?................................................................. 52
Inserting and Removing a ExpressCard....................................... 54
3.8 USING FLASH MEMORY CARDS..................................................... 56
What is Flash Memory Card?...................................................... 56
4 CONNECTING TO PERIPHERALS............................................. 59
4.1 USING THE USB PORT................................................................... 60
4.2 U
SING AN EXTERNAL MONITOR PORT.................................................. 60
4.3 U
SING THE EXTERNAL AUDIO SYSTEM ......................................... 62
4.4 USING THE LAN PORT .................................................................. 62
4.5 USING THE WIRELESS LAN........................................................... 63
4.6 USING THE MODEM PORT.............................................................. 63
5 CARING FOR YOUR NOTEBOOK.............................................. 67
5.1 IMPORTANT SAFETY INSTRUCTIONS .............................................. 68
5.2 CLEANING YOUR COMPUTER ........................................................ 68
5.3 MAINTAINING THE LCD QUALITY ................................................ 70
5.4 MAINTAINING YOUR HARD DISK .................................................. 70
5.5 BATTERY CARE GUIDELINES......................................................... 70
5.6 WHEN YOU TRAVEL...................................................................... 71
APPENDIX A SYSTEM SPECIFICATION........................................ 73
8
Page 9
Notebook User Guide
Processor Unit.............................................................................. 74
System Memory............................................................................. 74
LCD Display................................................................................. 74
VGA System .................................................................................. 74
Storage.......................................................................................... 75
Audio System ................................................................................ 75
ExpressCard ................................................................................. 75
Touchpad....................................................................................... 75
Keyboard ...................................................................................... 76
Flash BIOS ................................................................................... 76
I/O Ports.......................................................................................76
Wireless devices............................................................................ 76
AC/DC Power Supply Adapter.....................................................76
Battery .......................................................................................... 76
Weight and Dimension ................................................................. 77
9
Page 10
Page 11
Introduction1
1 Introduction
Your Notebook PC is a fully Microsoft®
Windows® compatible portable personal computer.
With the latest features in mobile computing and
multimedia technology, this notebook makes a natural
traveling companion. Your Notebook PC runs a wide
range of business, professional, entertainment and
personal applications.
Your Notebook PC is an ideal choice for use in the
office, the schoolroom, at home and on the road.
11
Page 12
Notebook User Guide
1.1 Feature Highlight
Before we go to identify each part of your Notebook PC, we will first
introduce you to other notable features of your computer.
Processing Unit
• Your notebook runs on Intel® Core
TM
2 Duo processor that is integrated
with 4MB L2 Cache. Check with your dealer on the CPU type and speed.
• Fully compatible with an entire library of PC software, based on Genuine
Microsoft® Windows® XP or Microsoft® Window Vista
TM
.
Memory
This notebook provides two memory slots for installing DDR2 SDRAM 200-
pin SODIMM modules up to 4GB using 512MB, 1024MB or 2048MB DDR
SDRAM modules.
Wide Screen LCD Display
Provides a WXGA 15.4" 1280 x 800 (16:10) wide screen LCD display.
Wireless LAN (optional)
Intel® PRO®/Wireless 3945ABG Network Connection (Tri-mode
802.11a/b/g)
Optical Disk Drive
The Optical Dick Drive will either be a CDRW/DVD or a DVD/RW combo.
USB 2.0
Provides four USB2.0 ports for high-speed connectivity.
12
Page 13
Introduction1
ExpressCard
Provides one ExpressCard slot for the faster, new-generation, PC card
solution.
Audio System
Compliant with Intel HD Audio (Azalia® 2 channels)
PCI Express Architecture
Compared to AGP architecture, PCI Express™ architecture enhances I/O
bandwidth and improves graphics performance.
Flash BIOS
Flash BIOS allows you to easily upgrade the System BIOS using the Phoenix
Flash utility program. Contact Technical Support for further information.
Power and System Management
• Integrated SMM (System Management Mode) on system chipset that shuts
down components not in use to reduce power consumption. To execute
power management, you can set up the parameter in Power Options
properties by pointing your mouse to Control Panel of Windows.
• Closing the Notebook computer (lowering the cover) allows you to
suspend the system operation instantly and resume at the press of the
power button.
• System Password for User and Supervisor included on the BIOS SETUP
Program to protect unauthorized use of your computer.
13
Page 14
Notebook User Guide
1.2 Unpacking the Computer
Your computer comes securely packaged in a sturdy cardboard shipping
carton. Upon receiving your computer, open the carton and carefully remove
the contents. In addition to this User Guide, the shipping carton should also
contain the following items:
; The Notebook Computer
; An AC Adapter and AC Power Cord
; Li-Ion Battery Pack
; Driver CD containing Electronic-manual and Application CD’s
; Modem Cable
; Quick Setup Guide
Carefully inspect each component to make sure that nothing is missing and/or
damaged. If any of these items is missing or damaged, notify your Account
Manager immediately. Be sure to save the shipping materials and the cartons in
case you need to return the computer.
14
Page 15
Introduction1
1.3 The Inside of the Notebook
The notebook computer is compact with features on every side. First, look
at the inside of the system. The following sections describe inside features.
1. Colour Widescreen LCD Display 2.7. Built-in Stereo Speaker
3. Keyboard 4. Touchpad Pointing Device
5. Easy Buttons 6. Power On/Resume Button
8. LED Indicators
• Colour Widescreen LCD Display
The notebook computer comes with a Colour LCD that you can adjust
for a comfortable viewing position. The LCD is 15.4” TFT color LCD
with 1280x800 (Wide XGA with ratio 16:10) resolution panels. The
15
Page 16
Notebook User Guide
features of the Colour LCD Display are summarized as follows:
⇓ TFT Colour Widescreen 15.4” 1280x800 (Wide XGA) resolution
panels.
⇓ Capable of displaying 16M Colours (32-bit true Colour) on either size
panels.
⇓ LCD display control hot-keys allows you to adjust the brightness of
the LCD.
⇓ Simultaneous display capability for LCD and external desktop
computer monitor.
• Built-in Stereo Speakers
Integrated left and right mini stereo speakers for sound and audio output.
• Keyboard
⇓ Standard QWERTY-key layout and full-sized 87 keys keyboard with
Windows system hot-keys, embedded numeric keypad, 6 hot keys,
inverted "T" cursor arrow keys, and separate page screen control
keys.
⇓ Wide extra space below the keyboard panel for your wrist or palm to
sit-on comfortably during typing.
• Touchpad Pointing Device
Microsoft® Windows® compatible mouse with two Touchpad click
buttons. The two buttons function as a standard computer mouse. Simply
move your fingertip over the Glide Pad to control the position of the
cursor. Use the selection buttons below the Glide Pad to select menu
items.
16
Page 17
Introduction1
• Easy Buttons
There are three easy buttons used for CPU throttling, accessing Internet
and Wireless LAN functions instantly and easily. Description of the easy
buttons appears in the latter part of this section.
• Power On/Resume Button
Switches the computer power on and off, or resumes whenever it is in
Suspend mode.
• LED Indicators
Keeps you informed of your notebook computer’s current power status
and operating status. Description of the status icons appears in the latter
part of this section.
NOTEBOOK STATUS ICONS
The Status LED Panel keeps you informed of the notebook’s current power
and operating status. Each LED is marked with an icon to designate the
system status.
1. Power Indicator 2. Battery Charging LED
3. Drive Access 4. Wireless LAN Access
5. Caps Lock 6. Scroll Lock
7. Num Lock
17
Page 18
Notebook User Guide
• Power Indicator
Lets you know that power to the system is turned on. This LED is
positioned so that you can see the power state whether the LCD panel is
opened or closed.
⇓ Lights green when the system is powered on.
⇓ Lights green blinking when the system is in Standby mode.
⇓ Lights yellow when the battery power is low.
⇓ Lights orange when the battery power is critical low.
• Battery Charging LED
Lights to indicate battery in charging status.
⇓ Lights orange to indicate that the battery is in charging.
⇓ Lights orange blinking when the battery charging is in error.
⇓ Lights green to indicate the battery is fully charged or no battery
installed.
• Drive Access
When LED in blue blinking light indicates that the system is accessing the
Hard Disk or Optical Disk Drive.
• Wireless LAN access
When LED in blue light indicates that the wireless LAN module is
activated. When LED lights off, it indicates that the function is disabled.
• Caps Lock
When LED in blue light indicates that the Caps Lock key on the keyboard
is activated. When activated, all alphabet keys typed in will be in uppercase
or capital letters.
18
Page 19
Introduction1
• Scroll Lock
When LED in blue indicates that the Scroll Lock key on the keyboard is
activated. The Scroll Lock key has different functions depending on the
software you are using.
• Num Lock
When LED in blue light indicates that the Num Lock key on the keyboard
is activated. When activated, the embedded numeric keypad will be
enabled.
THE FUNCTION OF EASY BUTTONS
1. CPU Throttling 2. Internet Button 3. Wireless LAN Button
• CPU Throttling
Press this button to decrease the CPU performance speed in order to save
power for extending battery life and operation time.
19
Page 20
Notebook User Guide
• Internet Button
This technology is designed specifically for providing a very convenient
way in connecting Internet only by pressing Internet button as shown in
the graphics. Just Press this button to open the Internet Explorer directly.
• Wireless LAN Button
Push this button to activate or inactivate the Wireless LAN. When you
activate the wireless LAN function, it will search the wireless LAN signal
automatically if you had installed the driver.
20
Page 21
Introduction1
1.4 The Front Side of the Notebook
1. Cover Switch
• Cover Switch
The cover (LCD panel) is locked when it is closed. Slide the button right
aside to release the latch for opening the cover of the computer.
1.5 The Rear Side of the Notebook
The system ports at the back of your notebook computer can connect various
devices. Each port is described as followings.
21
Page 22
Notebook User Guide
1. USB 2.0 Ports 2. VGA Port 3.Kensington Lock Hole
• USB 2.0 Ports
The Universal Serial Bus (USB) port allows you to connect USB 2.0-
compliant devices to your notebook computer.
• VGA Port
Lets you attach an external monitor or projector for wider display. You
can run the LCD display and the external monitor simultaneously or
switch it to monitor only using the display hot-key.
• Locking Device Keyhole
Lets you attach a Kensington security system or a compatible lock to
physically secure your notebook computer.
22
Page 23
Introduction1
1.6 The Left Side of the Notebook
The left side of your notebook computer provides the features shown in the
following figure.
1. Modem Port 2. Optical Disk Drive
3. USB 2.0 Ports 4. Headphone Jack
5. Microphone Jack
+
Modem Port
A 56K internal fax/data modem is installed. RJ11 to UK phone cable is
supplied to connect to a UK phone socket.
When using your telephone equipment, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and injury to persons,
including the following:
1. Do not use this product near water, for example, near a bath tub, wash
bowl, kitchen sink or laundry tub, in a wet basement or near a swimming
pool.
2. Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
23
Page 24
Notebook User Guide
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes for
possible special disposal instructions.
• Optical Disk Drive
Allows you to load and access data from a compact disc (CD) or a digital
versatile disc (DVD) and play conventional audio CDs. It also can create a
CD/DVD by using CD-R/RW or DVD-R/RW (subject to specification).
• USB 2.0 Ports
The Universal Serial Bus (USB) port allows you to connect USB 2.0-
compliant devices to your notebook computer.
• Headphone Jack (with SPDIF out)
Lets you plug in a stereo headphone, powered speakers, or earphone set
with 3.5mm jack plug for personal listening. (The SPDIF transmits
digitized audio signal by optical fiber. The external audio amplifier can get
the best audio quality without loss.)
• Microphone Jack
Allows you to connect an external microphone for audio input.
24
Page 25
Introduction1
1.7 The Right Side of the Notebook
The right side of the notebook computer offers the features shown in the
following figure.
1. ExpressCard Slot 2. 4 in 1 card slot 3. Air-Outlet Vent
4. DC Power Port 5. LAN Port
Right Side Features
• ExpressCard Slot
A newly developed PC Card interface, its connector has 26 pins and has a
potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each
direction).
• 4 in 1 card slot
The card slot supports SD, MMC, MS (Memory Stick) and MS-Pro flash
memory card format. You can use any of the 4 types of flash memory
cards for extra storage media. For more detail of flash card, you can refer
to Chapter 3.9
25
Page 26
Notebook User Guide
• Air-Outlet Vent
Allows cooling of your computer and keeps it within operating
temperature (DO NOT BLOCK).
• DC Power Port
Lets you connect the AC power adapter in supplying continuous power to
your notebook and recharging of the battery.
• LAN Port
An internal 10Base-T/100Base-TX / 1000Base – TX Ethernet LAN
allows connection to a LAN (Local Area Network) (Cable not supplied).
1.8 The Underside of the Notebook
The bottom of the notebook computer offers the following features.
1. Hard Disk Compartment 2. Battery Lock Latch
3. Battery Bay 4. System Compartment
5. Memory Compartment 6. Battery Release Latch
9Bottom of the System
26
Page 27
Introduction1
• Hard Disk Compartment
Storage location for the built in Hard Disk Drive.
• Battery Lock Latch
Push the latch to the lock side to lock and secure the battery, or push the
latch to the unlock side for unpacking the battery pack.
• Battery Bay
Equipped with a choice of Lithium-Ion (Li-Ion) battery pack.
• System Compartment
This compartment is for installing Wireless LAN module, CPU and
cooling solution.
• Memory Compartment
There are two SO-DIMM memory slots. One memory slot is normally
empty for upgrade use.
• Battery Release Latch
To release the battery, first locate the Battery Lock Latch at the left side
with unlock status, then push the Battery Release Latch to the right end to
remove the battery pack.
27
Page 28
Notebook User Guide
1.9 Notebook Accessories
AC Adapter
The AC Adapter supplies external power to your notebook computer and
charges the internal battery pack simultaneously. The AC adapter has an auto-
switching design that can connect to any 100VAC ~ 240VAC power outlets.
You just change the power cord if you are going to use your notebook in other
countries with different connector outlets. (UK power cord supplied)
When you connect the AC adapter, it charges the battery whether or not the
notebook computer is powered on.
Battery Pack
Aside from the AC adapter, your computer can also be powered through the
internal battery pack. The battery pack uses rechargeable Lithium-Ion (Li-Ion)
battery cells that provide extended operating times when fully charged and
power management enabled. You should always leave the battery fitted to your
notebook even when using the AC adapter as it acts as a back-up power supply
in case power from the AC adapter is cut off. It is also very important to have
the battery pack always charged to prevent battery cell degradation.
28
Page 29
Introduction1
1.10 Notebook Options
DVD/CD-RW Combo Device
This device pack can write data to CD-R or CD-RW CD for you to backup the
data and also can read DVD/CD titles.
DVD dual (Dual Rewritable DVD combo) Device
This device combines the following two standard formats. Using the suitable
media.
This device pack can write data to CD-R or CD-RW and DVD-R or DVD-
RW media and also can read DVD/CD title. This media is commonly used on
DVD video player.
DVD videos can also be played using the software supplied.
29
Page 30
Page 31
Getting Started 2
2 Getting Started
Your Notebook is designed and pre-configured for
easy setup and use. This chapter describes the
installation steps you should follow to get the
notebook up and running as quickly as possible.
Contact your supplier if they have pre-installed all the
needed drivers to fully operate your computer or if
there is an update on the driver installation of the
notebook.
31
Page 32
Notebook User Guide
2.1 Using the Battery Pack
The notebook is designed to operate with one of the following power sources:
• With AC power using the AC adapter connected to an electrical outlet.
• With a Lithium-Ion (Li-Ion) battery pack.
You should use the AC adapter whenever it is possible, relying on the battery
pack only when AC power is unavailable.
The rechargeable Li-Ion battery pack allows you to operate the notebook
without an external power source. When you connect the AC power adapter,
the battery immediately starts to recharge. Normal battery charging time is 2
hours for Lithium-Ion (Li-Ion) battery pack when your computer is turned off.
+
Li-Ion battery is vulnerable, do not charge it with other power adapter, or it
may cause fire or explosion.
32
Page 33
Getting Started 2
Installing the Battery Pack
This notebook provides the most convenient way to install the battery pack
into your computer. Ensure the battery is in the correct orientation before
inserting.
Removing the Battery Pack
To remove the battery pack, slide the lock latch to the end of left side to
unlock the battery lock latch (1), and slide the battery release latch to the end
of right side to release the battery latch (2), then take out the battery pack with
your finger (3) simultaneously.
33
Page 34
Notebook User Guide
Replacing the Battery Pack
When your notebook estimates that the battery only has enough charge to
continue for a few minutes, it will alert you with a battery low warning beep. If
you are consuming a lot of power by using the audio system, the ExpressCard
slots, the hard disk drives, and optical disk drive, your notebook might run out
of charge much sooner than you expect. You should always respond to the
battery low indication by connecting to AC power or turning off your
notebook, or suspending your notebook to disk. If you do not do so, the
notebook will automatically suspend to disk and turn off. The contents of the
memory will store in the hard disk drive. You will be unable to restart the
notebook until you have connected to the AC adapter or installed a charged
battery. To replace the battery pack, refer to the previous sections on
"Installing the Battery Pack" and "Removing the Battery Pack."
+
For Window XP, the suspend mode (Hibernate or Standby) can be chosen
at Power Options of Windows's Control Panel)
+
Be sure to save your data before replacing the battery pack or connecting
the AC adapter. Failure to do so can result in data loss.
2.2 Connecting the AC Power Source
The AC adapter provides external power source to your computer and charges
the internal battery pack at the same time. The AC adapter also has an auto-
switching design that can connect to any 100VAC ~ 240VAC power outlets.
To connect the power adapter:
1. Plug the AC power cord into the power socket of the AC power adapter.
34
Page 35
Getting Started 2
2. Plug the other end of the AC power cord to an AC wall outlet.
3. Plug the connector of the AC adapter to the DC-IN port found at the
right side of the computer.
+
Whenever possible, it is advisable to always have the AC adapter connected
to the notebook and the battery pack installed. This ensures continuous
power supply and prevents any data loss incurring from sudden power
failure.
+
y For the power supply of this equipment, an approved power cord has to
be used.
y Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
y Before cleaning the computer, make sure it is disconnected from any
external power supplies (i.e. AC adapter).
35
Page 36
Notebook User Guide
2.3 Starting Your Computer
The Power/Resume button is found on the top of the base unit. Press the
Power/Resume button to start your computer and check that if the Power
LED turns on.
After a few seconds, the computer’s display will turn on and your computer
will begin to execute the Power On Self Test or POST to check if all system
components are running properly. Any errors found during the test will be
displayed on the screen and may generate a short beep sound as well.
After the test has completed, your computer will start to search and boot up
the operating system from your hard drive. The notebook computer normally
comes with a Genuine Microsoft® Windows® operating system pre-installed
in your hard drive.
36
Page 37
Getting Started 2
2.4 Adjusting the Display Controls
The LCD brightness adjustment is controlled by <Fn> +<F8> and <Fn> +
<F9> keys respectively. You need to press these hot-key controls after
powering on your notebook to suit your viewing pleasure.
The Brightness hot-key control adjusts the brightness on the LCD. The
brightness hot-key control will not set the LCD completely dark or bright; it
provides sufficient lighting to the LCD to match the external lighting of the
surrounding. The brighter the room, the more you need to increase the
brightness of the LCD.
2.6 Turning off Your Computer
Whilst operating on battery power, if you are not going to use the computer
for a while, either turn off to reserve battery life or power via the AC Adapter.
Before turning off the power, you need to first save all work, close all
application programs and shutdown the operating system.
37
Page 38
Notebook User Guide
This page is intended to be blank.
38
Page 39
Using Your Notebook 3
3 Using Your Notebook
This chapter describes how to operate the standard
Built-in features of the notebook that you normally would
use in your day-to-day computer work. If you are new to
computers and to your operating system, you also need to
read the manual for the operating system on how to work
with your computer. It is very important to familiarize
yourself well with the operating system. The succeeding
chapters not only guide you to go beyond the basics, but
also try other exciting features.
39
Page 40
Notebook User Guide
3.1 Understanding the Keyboard
Functions
Your notebook computer is equipped with an 87 keys keyboard that provides
all the functionality of a full-sized 101 or 102-key keyboard. Aside from the
standard typewriter-layout keyboard of your computer, there are a number of
extra features and function controls on the built-in keyboard including
Windows system hot keys.
1. Function Keys 2. Control Keys
3. Windows Start Menu Key 4. Control Keys
5. Windows Shortcut Key 6. Cursor Control Keys
40
Page 41
Using Your Notebook 3
Keyboard
Key features and operations are described below:
• Function Keys
Function keys are application-driven, like F1 through F12 can be found on
the keyboard. These keys work together with the Fn key to activate special
functions. Some keys (printed in blue on keypad) are preprogrammed with
dual functions.
• Control keys — Ctrl, Alt, Fn, and Shift are controls used in conjunction
with other keys to change their functions. To use control keys, press and
hold the control key while pressing another key. For example, "Press Ctrl-
C" means to hold down the Ctrl key and type the letter C. Key
combinations work especially to the application you are running.
• Windows keys
Use the following two keys to facilitate your work:
⇓ Start Menu key
Displays the Start menu.
⇓ Shortcut/Application key
Provides quick access to shortcut menus. This key acts like a right
mouse button.
• Cursor Control keys
Cursor control keys let you position the cursor on the screen where you
want. In the screen, the cursor is a blinking underline, block, or vertical
bar depending on the application. The cursor indicates where the next text
typed is inserted.
• Typewriter keys
Typewriter keys (also called alphanumeric keys) are used to enter text and
characters. Keys with blue print on them behave differently when
combined with control keys.
41
Page 42
Notebook User Guide
BASIC KEYBOARD FUNCTIONS
Keypad Function Description
<Enter> key. Execute a command. Within many
text editing application programs, the <Enter> key
inserts a hard carriage return, just like what ordinary
typewriter does.
<Esc> key. Press this key to cancel or escape from
a command or function.
<Ins> key. Known as the Insert key. Press this key
to toggle the keyboard data entry from insert to type
over mode.
<PrtScr> key. Known as the Print Screen key. Press
this key to map the whole screen to share memory for
your specific usage.
<Del> key. Known as the Delete key. Press this key
to delete the character to the right of the cursor, or
delete marked texts or items.
<Pause> key. Press this key to temporarily halt
execution of a command. Pressing any other key to
resume execution of a command.
<Backspace> key. Press this key to delete the
character to the left of the cursor.
<Shift> key. Press this key in combination with
alphabet letters to produce uppercase letters in
typing. Use this key in combination with those twocharacter keys (found on the second row of the
keyboard) to produce the upper marked keys. Also
used in most application program in combination
with other keys to execute a certain command.
<Tab> key. Press this key to move the cursor to the
next tab stop on the right. This key works much the
same as in ordinary typewriter.
42
Page 43
Using Your Notebook 3
Keypad Function Description
<Ctrl> key. Known as the Control key. Used in
most application program in combination with other
keys to execute a certain command.
<Alt> key. Known as the Alternate key. Used in
most application program in combination with other
keys to execute a certain command.
+
<Fn> + <Num Lock> key. Activates the
embedded 15-key numeric keypad. The keys are
color coded blue.
<Caps Lock> key. Used in most application
program to always activate uppercase alphabet
characters.
+
<Fn> + <Scroll Lock> key. Used in most
application program to scroll the screen without
having to move the cursor.
CURSOR CONTROL KEYS
Keypad Function Description
Up arrow key. Moves the cursor up one line at a
time.
Down arrow key. Moves the cursor down one
line at a time.
Left arrow key. Moves the cursor to the left one
space at a time.
Right arrow key. Moves the cursor to the right
one space at a time.
43
Page 44
Notebook User Guide
SCREEN CONTROL KEYS
Keypad Function Description
<Home> key. Moves the cursor to the
beginning of a screen or line.
<PgUp> key. Moves the cursor up one
screen at a time
<PgDn> key. Moves the cursor down one
screen at a time
<End> key. Moves the cursor to the end of a
screen or line.
WINDOWS HOT KEYS
Keypad Function Description
<Start> key. Pulls up the Windows Start menu.
<Right Click> key. Performs a mouse right-click
function for Windows system.
SPECIAL FUNCTION KEYS
The notebook has special system function keys that activate key serving dual
functions. When pressed in conjunction with the <Fn> key, these keys set
specific system parameters and are sometimes referred to as "hot keys".
44
Page 45
Using Your Notebook 3
Keypad Function Description
+
Switches display between LCD, CRT, or
LCD and CRT simultaneously.
+
To shut down or resume the built-in
system speaker volume.
+
Increases the brightness of LCD display
incrementally.
+
Decreases the brightness of LCD display
incrementally.
+
Decreases the audio volume of the
notebook incrementally.
+
Increases the audio volume of the
notebook incrementally.
3.2 Using the Touchpad Pointing Device
Your computer comes with a built-in Glide Pad pointing device that is found
on the center of the palm-rest surface.
The Glide Pad offers a number of options that let you customise how it
45
Page 46
Notebook User Guide
functions. To access these options, locate the Control Panel and double click
on the Mouse icon. The options let you control the size and Colour of the
cursor, cursor speed, the accepted double-click speed, and selection button
orientation.
The Glide Pad works a mouse pointing device replacement that is used under
Microsoft® Windows® based operating system. You can use the standard
Microsoft® driver that is compatible with the Glide Pad device and is normally
used under Microsoft® Windows® based operating system.
1. Left Selection Button 2. Right Selection Button
3. Touchpad
Touchpad Features
Here how to use the touchpad pointing device:
46
Page 47
Using Your Notebook 3
1. The rectangular surface acts like a miniature duplicate of your display
screen. To move the mouse cursor, place the finger lightly on the sensor
pad and move in the desired direction. If you reach the end of the pad, lift
your finger and place it back down on the other side of the pad.
2. To select an item, click on the item by pressing the left button control or
by simply tapping on the surface once. A light, quick tap always works
best. To execute an item, click the left button twice or do a quick double
tap on the surface.
3. To simulate holding the mouse button down (dragging an icon or
selection), use the tap-and-drag gesture. This feels much like a double-
click, except that the finger remains on the pad after the second tap: Tap,
lift, tap, hold and move. The simulated button remains held as long as the
finger remains on the pad.
4. When you press both the Left and Right click button at the same time, the
auto Scroll function will be activated.
+
Avoid spilling any liquid on the touchpad surface and always keep the
touchpad surface and pointing finger dry from sweat built-up. Also do not
expose touchpad to any magnetic source object.
3.3 Configuring Your Screen Display
The VGA display function of your notebook is based on a high performance
PCIe local bus controller and is fully VGA compatible. This controller offers a
large set of extended functions and higher resolutions especially useful when
you are connecting an external high-resolution and high-frequency display.
47
Page 48
Notebook User Guide
This notebook computer model provides Wide screen 15.4” 1280x800 (Wide
XGA) resolution panels. You would also probably want to set the amount of
Colour output to display sharper images and photos.
POSSIBLE DISPLAY CONFIGURATIONS
The table below shows you the possible display resolution you can set when
using either the LCD display or the external monitor (CRT):
Display Possible Resolution Maximum Colors
Widescreen
15.4” 1280x800
WXGA LCD
1280x800
1280x768
1152x864
1024x768
800x600
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
CRT Only 1280x1024
1152 x 768
1024x768
800x600
640x480
16 million colors
16 million colors
16 million colors
16 million colors
16 million colors
+
65,536 or 64K colors is also equivalent to 16-bit high color while 16 million or
16M colors is equivalent to 32-bit true color.
+
You can use the <Fn> + <F3> hot-key to switch the display between LCD
only, CRT only, or both LCD and CRT display.
48
Page 49
Using Your Notebook 3
CHANGING THE DISPLAY PROPERTIES UNDER MICROSOFT®
WINDOWS®
To change the display properties of your screen under Microsoft® Windows®,
just right-click on the desktop area and select Properties or go to the Control
Panel and click on the Display icon. The Display Properties dialog box will
appear on your screen. Click on the Settings tab to set your desired
configuration. Make sure to follow the configuration table above.
3.4 Knowing the Power Saving Features
Your computer is designed to incorporate intelligent and advanced power
management functions that turn off the power of most components when the
system is idle or not in use. This feature gives you longer battery life. For more
information on how to control the power management features of your
computer, refer to Power Options function in Control Panel of Microsoft®
Windows®.
The definitions of Standby Mode, Hibernation Mode, and Shutdown are
depicted as follows:
Standby Mode
Standby Mode is designed mainly for power saving. When the Standby Mode is
activated, your display and hard drive are shut down and all open applications
and documents are stored in RAM (Random Access Memory). This allows
your notebook to wake up quickly, but a low level of power is required to
maintain this suspended state. How quickly your system powers down into
Standby mode is up to you by setting proper times in Power Options of
Control Panel in Microsoft® Windows®. While the notebook is in Standby
49
Page 50
Notebook User Guide
mode, the LED of power indicator flashes. To resume working again, you can
press the power button to return your work to the screen where you left off.
Hibernation Mode
In Hibernation mode, all system devices are powered down and the contents
of RAM are stored on your hard drive. Hibernate mode uses less power than
Standby mode, but takes a bit longer time to resume. When your notebook
goes into hibernation, Windows saves your entire desktop state before
powering down your computer. You don’t need to save and close each
document before you put your notebook into hibernation. When you press
power button again, system will bring your notebook out of hibernation. You'll
find your applications and documents open on your desktop exactly as you left
them.
+
Hibernation is enabled by default. To verify that Hibernation is enabled,
Click
Start
, point to
Settings
, and then click
Control Panel.
Choose
Power Options
icon, then click on the
Hibernate tab
. IF the chock box
of Enable Hibernate is selected, the Hibernation mode is enabled.
Shutdown
All power has been turned off from the notebook. This means that no power
including external AC power source and battery power source will be consume
by the notebook.
3.5 Working with the Built-in HDD
Your notebook computer is equipped with a built-in large capacity 2.5 inch
IDE hard disk drive where you store or install your computer operating system
and all application software programs.
50
Page 51
Using Your Notebook 3
+
If you wish to replace your hard disk, contact your local dealer for more
information about this dealer-installable device.
3.6 How to Access the Optical Drive
Your system ships with an optical disk drive installed on the left side of your
computer. You would normally use the drive for installing operating system
and software application programs.
To insert and remove a disc on the drive:
1. Make sure the computer is turned on. Press the eject button found on the
door cover of the combo drive. The CD tray mechanism will pop-out
slightly and slowly pull out the whole length of the tray.
2. Place the disc on top of the CD tray with the label side facing up. Gently
press the compact disc onto the center spindle to secure the disc.
51
Page 52
Notebook User Guide
3. To remove the disc, press on the center spindle and pull up the disc from
the side until the disc snaps out of the spindle lock.
4. To close the combo drive, simply push the CD tray inside. The combo
drive LED will activate when the disc is detected. Wait until the LED has
turned off and then start to read the disc.
3.7 ExpressCard
WHAT IS EXPRESSCARD ?
The ExpressCard is a newly developed PC Card interface, its connector has
just 26 pins and the interface has a potential transfer rate of up to 500 MB/sec
(or 250 MB/sec in each direction) using a single-lane PCI Express link. Its
form factor is up to 40 percent smaller than a PC Card, which allows
ExpressCard modules to be included in smaller host systems. Designed for
both desktop and mobile use, ExpressCard use either be USB 2.0 or a single
lane PCI Express technology.
The ExpressCard standard was developed by PCMCIA member companies.
52
Page 53
Using Your Notebook 3
Dimensions of ExpressCard
Current CardBus PC cards are 54 millimeters wide. ExpressCard can be
divided into two categories, based on width. Most designs will use the
ExpressCard 34 design, which sets the width at 34 millimeters. For some
applications, the wider ExpressCard 54 standard will be used to produce cards
that can handle the higher thermal requirements of those applications.
All ExpressCard modules are 5mm thick but the standard also allows for card
developers to build longer 'extended' modules.
Native Bus Connection
The ExpressCard standard supports both the USB 2.0 and PCI Express
interfaces. Card manufacturers are able to choose whichever bus is appropriate
to their application; the performance of PCI Express, or from the wide range
of solutions supported by USB. All host PC ExpressCard slots will support
cards using either interface. The host platform no longer needs to incorporate
53
Page 54
Notebook User Guide
a bridge chip between the chipset and the socket. PCI Express and USB 2.0
are fully hot-pluggable.
To support the broadest range of applications there are two sizes of module.
Both are smaller that today's CardBus card. The smallest card, the
ExpressCard/34 module, is almost half the size of a CardBus card. This size is
suited to a very broad range of applications covering communications, media,
and general purpose.
PC Card
(CardBus, Type II)
ExpressCard/54 ExpressCard/34
Data Transfer
rate
132 Mbps 500Mbps (or 250Mbps in each direction)
Connector pins 68 26
Port Type Parallel Serial
Dimensions
(HxWxD)
54mmx86mmx5mm 54mmx75mmx5mm 34mmx75mmx5m
m
A big part of "just working" will be the existing software support. Both
Microsoft
® Windows® XP and Microsoft® Windows® 2000 already
support the ExpressCard specification.
INSERTING AND REMOVING A EXPRESSCARD
Your computer includes hot swapping capability, that allows you to exchange
cards while the computer is turn on and start using it immediately.
Inserting ExpressCard
To insert a ExpressCard into the ExpressCard slot:
54
Page 55
Using Your Notebook 3
1. Locate the ExpressCard slot cover on the right side of the computer.
2. Insert the side of ExpressCard with the 26-pin socket into the
ExpressCard slot. The face label of the card should also be facing up.
3. When the full length of the card is almost inside the slot, push firmly but
slowly, to ensure full connection with the computer. The ExpressCard will
be automatically detected, and once the required driver is installed, it will
generate a beep sound to indicate that the card is detected.
Removing ExpressCard
To remove an ExpressCard from the ExpressCard slot, you should first disable
the ExpressCard card setting in the system as described followings:
1. Double click the ExpressCard icon on the right bottom side of the task
bar.
2. Select the socket from the list that you want to remove, and click Stop
button. The system then disables the function of ExpressCard card.
55
Page 56
Notebook User Guide
3. Then you can remove the inserted ExpressCard, push the ExpressCard to
the bottom to release the ExpressCard.
4. When the ExpressCard has moved out a space out of the slot, hold the
edges of the card and slowly slide it out.
+
The power consumption of ExpressCard/54 is about 2.1W, while the
consumption of ExpressCard/34 is about 1.3W. To save energy, press the
button to disconnect the card when it is not in use.
3.8 Using Flash Memory Cards
WHAT IS FLASH MEMORY CARD?
Flash Memory is a memory storage media. It is used by most digital cameras
and PDA’s. Flash memory cards come in different form factors and brand
names. This computer supports most of the flash memory card, including SD,
MMC, MS (Memory Stick), and MS-Pro card.
56
Page 57
Using Your Notebook 3
The 4 in 1 card slot is used by the following cards as SD, MS (Memory Stick ),
MMC, and MS-Pro.
+
For reference, only one card can be inserted into the 4 in 1 card or CF slot at
a time
Inserting Flash Memory Card
To insert a flash memory card into the slot is similar to ExpressCard. You only
need to pay more attention whenever insert the flash memory card into the slot
with the correct side.
For MMC and SD card, you should position the copper connector at the
bottom side. For Memory Stick card, you should position the copper
connector at the topside. All of these cards should be located at the center of
the slots in inserting.
Slot Card type Copper connector
4 in 1 SD (Secure Digital)
MMC (MultiMedia Card)
MS (Memory Stick)
MS_Pro
Bottom side
Bottom
Top side
Top side
57
Page 58
Notebook User Guide
Removing Flash Memory Card
It is similar to ExpressCard for removing a flash memory card from the slot.
You should first disable the card setting in the system as described in the
former section.
To remove the flash memory card, you should only pull out the card by finger,
there is no release button for flash memory slot.
58
Page 59
Connecting to Peripherals 4
4 Connecting to Peripherals
This chapter describes how you attach peripheral
devices to your notebook. You can attach a printer
or mouse; connect an external monitor and
keyboard, or any other peripheral device. You will
learn how to use these peripheral devices with the
step-by-step instructions depicted in this chapter.
59
Page 60
Notebook User Guide
4.1 Using the USB Port
USB (Universal Serial Bus) is a hardware interface that enables you to connect
multiple devices (such as printers, mice, keyboards, storage devices, joysticks,
digital cameras, and video conference cameras, etc.) to your notebook
computer, and up to 127 devices can be attached. Besides, USB’s hot swap
capability allows everything to be plugged in and unplugged without turning
the system off.
+
The USB bus distributes 0.5 amps (500 milliamps) of power through each
port. For the purpose of power saving, please disconnect your USB device
while not in use.
4.2 Using an External Monitor Port
Your computer has a 15-pin Monitor port for supporting any external displays.
You need a display signal cable (usually provided with the monitor). One end
of the cable must have a 15-pin connector for the system.
To connect an external monitor:
60
Page 61
Connecting to Peripherals 4
1. Turn off your computer and make sure the monitor power switch is
turned off.
+
The notebook computer must be powered off or suspended while the
monitor is being connected. Although you can connect the external Monitor
without power off the computer and the external monitor, however, it is
harmful to both devices and it shortens the life of these devices.
2. Connect the connector cable of the monitor to the VGA port at the back
of your computer. Secure the cable connection with the screws provided.
3. Connect the monitor power cable and plug it into a properly grounded
wall outlet.
4. Turn on the power of the monitor.
5. Turn on your computer. Both the LCD panel and the monitor screen will
show the display. Your computer is set at default to run at simultaneous
display mode.
6. If you only want to show the display on the external monitor or projector
and shut off the LCD display, you can use the <Fn> + <F3> hot-key to
switch display type between LCD and external monitor. Keep pressing the
hot-key until you get the display to external monitor only.
61
Page 62
Notebook User Guide
+
Refer to Chapter 3 regarding the possible External CRT resolutions and
how to change the display properties.
4.3 Using the External Audio System
At the left side of your computer, you will find the built-in audio ports. You
can connect Microphone jacks, earphone or powered speaker.
To connect to a audio jack:
+
Locate the audio port (Microphone, Headphone) that you want to use to
the target device.
+
Plug the jack into the port on the left side of the system.
+
If you use external speakers and experience the sound distortion or
feedback, please lower the volume. Some factors is caused by too close
locating the microphone and speakers from each other, moving away the
external audio option from the unit may also help.
4.4 Using the LAN Port
This notebook comes with an internal 10Base-T/100Base-TX/1000Base-TX
LAN module that connects your computer to other computers/networks
through a local area network (LAN) and supports data transfer rates at 10Mbps
and can be up to 100Mbps. The 10Base-T standard also called Twisted Pair
Ethernet is connected with RJ-45 connectors. The 100Base-TX is based on the
older Ethernet standard. Because it is 10 times faster than Ethernet, it is often
referred to as Fast Ethernet. The 1000Base-TX is often refered to as Gigabit
Ethernet.
The built-in LAN module provides a standard RJ-45 connector.
62
Page 63
Connecting to Peripherals 4
To connect the twisted-pair cable to your LAN port:
1. Locate a suitable length Cat5e patch cable (not supplied). Each end of the
cable has an RJ-45 connector.
2. Connect one end of the cable into the network wall outlet or directly into
a piece of active equipment (hub, switch, router etc).
3. Connect the other end of the cable into the computer RJ-45 LAN port.
4.5 Using the Wireless LAN
Wireless LAN is the major breakthrough in computer communication
technology. It lets user connect to the LAN environment without using any
cables. User can enjoy the wireless connection within the range of an Access
Point (AP) connected to the LAN.
An Access Point (AP) is the wireless transmission and receiving device, it
generally connects to the active equipment connecting the LAN environment
or act as the active equipment itself also controlling the wireless connection.
This computer integrates (subject to specification) a built-in Tri-mode 802.11
a/b/g wireless LAN module using Intel ® PRO/Wireless network solution
known as Intel ® Centrino™ mobile technology. IEEE 802.11b standard
63
Page 64
Notebook User Guide
supports 11 Mbps wireless connection speed. However, IEEE 802.11g
supports 54Mbps wireless connection speed, and is backward compatible with
the slower 802.11b. You can connect to the wireless LAN Access Point by
inserting a wireless LAN card into the ExpressCard slot.
4.6 Using the Modem Port
This notebook comes equipped with a 56K internal fax/data modem that
allows you to communicate with others via fax, email, or to connect to the
Internet via an Internet Service Provider.
The built-in fax/data modem provides a standard RJ11 connector.
To connect the analog phone cable to your modem:
1. Locate the analog phone cable in the accessories box in notebook
shipping carton. Each end of the cable has a RJ-11 connector.
2. Connect the RJ11 end of the cable into the notebook modem connector.
3. Connect the UK telephone plug end of the cable into a UK phone socket.
+
The speed of data transmission is dependent on the quality of telephone
lines. Digitally terminated lines improve the speed of data transmission.
Contact your service provider for more information.
64
Page 65
Connecting to Peripherals 4
+
The analog phone cable is an industry standard cable. Longer cables are
available at your local electronics store.
65
Page 66
Page 67
Caring for Your Notebook 5
5 Caring for Your
Notebook
Your Notebook PC requires little maintenance,
however the next section will give advice on how to
safely operate, clean and care for your Notebook PC
and maintain allowing the longest life from your
notebook PC.
67
Page 68
Notebook User Guide
5.1 Important Safety Instructions
This section gives you detailed information about how to maintain a safe
working environment whilst using the notebook computer. You can maintain
its condition and performance by following these guidelines. Please read it
carefully to ensure maximum safety.
• Before cleaning the notebook computer, make sure it is disconnected
from any external power supplies (i.e. AC adapter, car adapter and so on).
• When cleaning, do not use liquid or sprayed detergent. Instead, use a
moisture sheet or a cloth for cleaning.
• The AC power-outlet ideally should be installed near the notebook
computer and shall be easily accessible.
• Please keep the notebook computer from humidity.
• Place the notebook computer on suitable surface whilst in use.
• The air vents on the chassis are for air convection to help prevent the
notebook computer from overheating. DO NOT COVER THE
OPENINGS.
• Be careful of using power supply. The notebook computer has specific
power requirements.
• Use only a power adapter approved for use with this notebook computer.
• The power adapter may have a 3-pin UK plug. This is an important safety
feature. A compatible outlet is required. If it is not available, find a
qualified electrician to install one.
• While unplugging the power cord, disconnect it by the plug head, not by
its wire.
68
Page 69
Caring for Your Notebook 5
• Make sure the socket and any extension cords you may use can support
the total current load of all the connected devices.
• Place the power cord in such a way that people cannot step on it. Do not
place anything over the power cord.
• All cautions and warnings on the notebook computer should be noted.
• If the notebook computer is not in use for a long time, disconnect it from
mains to avoid possible damage by transient over-voltage.
• Never pour any liquid into openings as this may cause fire or electrical
shock.
• Never open the body of notebook computer. For safety, the notebook
computer should only be opened by qualified service engineer.
• If one of the following situations arises, have the notebook computer
checked by a service engineer:
⇓ The power cord or plug is damaged.
⇓ Liquid has penetrated into the notebook computer.
⇓ The notebook computer has been exposed to moisture.
⇓ The notebook computer has not worked well or you cannot get it
work according to user’s manual.
⇓ The notebook computer has dropped and damaged.
⇓ The notebook computer has obvious sign of breakage.
• To avoid any damage happened to the internal device, you should first
disconnect the AC adapter and remove the battery pack from the
notebook when replacing any internal device.
69
Page 70
Notebook User Guide
5.2 Cleaning Your Computer
When it is necessary to clean the plastic case and keyboard, use a soft, lint-free
cloth, slightly dampened with a mild detergent solution or use the contents of
any commercially available computer cleaning kit.
Never use alcohol, petroleum-based solvents, or harsh detergents to clean the
notebook. Also never spray any liquids directly on the computer case,
keyboard, or screen. If the liquid-crystal display (LCD) screen has become
smeared or dusty, clean the screen by first applying a mild glass cleaner to a
soft, clean, lint-free cloth, and gently wipe the glass. Never apply liquids
directly on the screen surface. Moreover, do not use paper towels to clean the
display screen. Paper can scratch the display screen.
5.3 Maintaining the LCD Quality
You should enable the power management of your computer to turn off the
LCD power and display when the system is in inactivity for some time. Adding
screen savers is also acceptable.
Follow the safety guidelines mentioned earlier and how to clean your
computer.
5.4 Maintaining Your Hard Disk
Losing your data has the same consequences as a system break down. Users
must make it a habit of doing hard disk maintenance every week or so. Here is
some maintenance you could do:
• Always back up your data files from your hard disk.
70
Page 71
Caring for Your Notebook 5
• Install a virus-detecting program to monitor virus that could tamper your
files.
• Use SCANDISK once in a while to correct any errors found in the
directory and File Allocation Table. This will also free up space from any
unused sectors.
• Never move or raise the computer while the hard disk is being accessed,
most especially don't jar the hard disk as this may cause a hard disk crash.
• Use hard disk maintenance programs like Disk Defragmenter of
Windows. These reorganize your hard disk by eliminating fragmentation
and improving your hard disk access time.
5.5 Battery Care Guidelines
The battery pack furnished with the computer requires reasonable care and
handling to ensure efficient operation and maximum life. There is a risk of fire
and chemical burn if the battery pack is handled improperly.
To ensure that the battery pack endures normal life cycle, always observe the
following precautions when handling the battery pack:
• Handle batteries carefully. Do not try to disassemble, crush, puncture,
open, drop, mutilate, short external contacts, disposed of in water or fire,
or expose it to temperatures higher than 60 C.
• Recharge batteries only as described in this manual and only in ventilated
areas. Never use an external charger other than the one supplied with your
computer.
• Do not leave batteries in hot locations for more than a day or two.
• Do not leave your battery in your computer for longer than 1 month
without plugging in the power adapter.
71
Page 72
Notebook User Guide
• Do not leave battery in storage for more than 2 months without
recharging it to prevent over discharge. Over discharge will hurt the
battery
• Dispose dead battery properly to protect the environment. The batteries
contain hazardous chemicals and should not be thrown out with
household or office rubbish.
5.6 When You Travel
For safety and convenience when traveling, please follow these instructions:
• Back up all needed files on your hard disk before traveling.
• Recharge your battery overnight to ensure full battery power before you
leave.
• Don't forget to bring along the AC adapter and extra battery pack.
• Try to bring backup software as well.
• Check the voltage rating and the outlet type of your destination. If the
power cord of the adapter is different, then you need to purchase a
suitable one. Consult your dealer.
• Carry your computer in its carrying case or in a briefcase. Never check-in
the computer as a luggage.
• Remember to apply those power saving features and techniques to save
battery power.
72
Page 73
System Specification A
APPENDIX A
System Specification
This appendix gives information on the technical
and hardware specifications of your computer. Please
note that the information mentioned here may not be
exactly the same with your computer as specification
is subject to change without notice or modifying this
manual.
Designed with an advanced modular architecture,
your Notebook PC also allows you for several levels
of customization and expansion that are previously
available only on desktop PCs.
73
Page 74
Notebook User Guide
PROCESSOR UNIT
• Intel® Core
TM
2 Duo processor T7000 sequence with Enhanced Intel®
Speedstep® Technology
• 4MB integrated L2 cache
SYSTEM MEMORY
• Two 200-pin memory slots
• User-upgradeable to maximum 4GB using 200-pin SODIMM 512MB,
1024MB or 2048MB modules
• DDR2 – 667 SDRAM modules
LCD DISPLAY
• 15.4" WXGA (16:10) Colour TFT LCD, 1280x800
• Maximum 16M True Colour on all LCD display
VGA SYSTEM
• Integrated with Intel 965GM graphics engine
• Simultaneous LCD and external monitor (CRT) display
• Maximum 16 million Colours on LCD display at 1280x800 resolution for
15.4"
LCD
• Maximum 16 million Colours on external monitor or projector at 1280 x
1024 resolution (Non-Interlaced)
74
Page 75
System Specification A
STORAGE
• 2.5” Format 9.5mm High SATA HDD Module; Bus Mastering, Ultra
DMA ATA-150 Support for LBA Scheme
• Support system boot from external USB device
• DVD/CD-RW Combo or DVD Super-Multi optical disk drive
• 4-in-1 (SD, MS, MMC, and MS_Pro) card reader
AUDIO SYSTEM
• Compliant with Intel HD Audio (Azalia® 2 channels)
• Built-in dual speakers
• Audio input jacks for microphone (MIC)
• Audio output jack for external speaker or headphone (Line-Out)
• Digitized audio SPDIF port for high quality signal transmission.
• Sound volume adjust by K/B Hot-Keys
EXPRESSCARD
• One 54mm, 26-pin ExpressCard slot
TOUCHPAD
• Integrated touchpad (Serial/USB mouse) pointing device with 2 click
buttons
• Support Auto Scroll function.
75
Page 76
Notebook User Guide
KEYBOARD
• Full-sized 87-keys keyboard with Windows systems hot-keys, inverted T-
cursor keys, 6 hot keys, 12 function keys, and embedded numeric keypad
• Provides international language keyboard
FLASH BIOS
512K Flash ROM BIOS for easy BIOS upgrade
I/O PORTS
• 1 x 15-pin VGA port
• 4 x Universal Serial Bus (USB 2.0)
• 1 x 10/100/1000 Mbps LAN port
• 1 x 56Kbps v.92 Data/Fax MDC Modem port
WIRELESS DEVICES
• Intel PRO/Wireless 3945ABG Network Connection
(Tri-mode 802.11a/b/g)
AC/DC POWER SUPPLY ADAPTER
Universal auto-switching (100V~240V) 65W adapter, 20 Volt
BATTERY
• Rechargeable 6 Cells Li-ion battery pack with Smart Battery function
• Approximately 3 Hours (for Battery Mark) Battery Life
76
Page 77
System Specification A
WEIGHT AND DIMENSION
• 357(W) x 271(D) x 26 ~ 39(H) mm
• Approximately 2.8 kg
77
Loading...