STMicroelectronics X-NUCLEO-GFX01M1 User Manual

X-NUCLEO-GFX01M1 top view.
Picture is not contractual.

X-NUCLEO-GFX01M1

Data brief

SPI display expansion board for STM32 Nucleo

Features

• 2.2” SPI QVGA TFT LCD

• 64-Mbit SPI NOR Flash memory

• Joystick for easy menu navigation

• Compatible with selected STM32 Nucleo boards using the ST morpho interface

Description

The X-NUCLEO-GFX01M1 expansion board adds graphic user interface (GUI)
capability to STM32 Nucleo boards.

It features a 2.2” SPI QVGA TFT display as well as a 64-Mbit SPI NOR Flash
memory for storing graphic images, texts and texture. The expansion board also
offers a joystick for GUI navigation.

X-NUCLEO-GFX01M1 uses the ST morpho connector. It is compatible with the

NUCLEO-F030R8, NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC,
NUCLEO-F401RE, NUCLEO-F410RB, NUCLEO-F411RE, NUCLEO-F446RE,
NUCLEO-G071RB, NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L412RB-P,
NUCLEO-L433RC-P, NUCLEO-L452RE, NUCLEO-L452RE-P and NUCLEO­L476RG Nucleo boards.

Product status link

X-NUCLEO-GFX01M1

DB4236 - Rev 1 - August 2020
For further information contact your local STMicroelectronics sales office.

www.st.com

X-NUCLEO-GFX01M1

1 Ordering information

To order the X-NUCLEO-GFX01M1 module, refer to Table 1.

Table 1. Ordering information

Order code Board reference User manual Target STM32

X-NUCLEO-GFX01M1 MB1642 UM2750 Not applicable

The STM32 Nucleo boards feature STM32 32-bit microcontrollers based on the Arm® Cortex®‑M processor.

Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

Ordering information

1.1 Product marking

The sticker located on the top or bottom side of the PCB board shows the information about product identification
such as board reference, revision and serial number.

The first identification line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board reference,
“Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the
assembly revision: for example B01.

The second identification line is the board serial number used for traceability.

Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference
design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will
be liable for any customer usage of these engineering sample tools as reference designs or in production.

“E” or “ES” marking examples of location:

• On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the
STM32 datasheet “Package information” paragraph at the www.st.com website).

• Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.

DB4236 - Rev 1

page 2/5