INPUTS PINNED OPPOSITE OUTPUTS TO
SIMPLIFY BOARD LAYOUT
ULN2801A
ULN2802A - ULN2803A
ULN2804A - ULN2805A
EIGHT DARLINGTON ARRA YS
DIP18
DESCRIPTION
The ULN2 801A -ULN2 805A each contai n e ight da rlington transistors with common emitters and integral suppression diodes for inductive loads. Each
darlington features a peak load current rating of
600mA (500mA continuous) and can withstand at
least 50V in the off st ate. Output s may b e paralle led
for higher cu rr ent c apability.
Five vers i ons ar e available to s im pl if y interfacing to
standard logi c famil ies : the ULN2 801 A is des igned
for general purpos e a pplications with a cur ren t li mi t
resistor ; the ULN2 802A has a 10.5kΩ input res istor
and zener for 14 -25V PM OS ; the U LN280 3A ha s a
2.7kΩ input resistor for 5V TTL and CMOS ; the
ULN2804A has a 10.5kΩ input resistor for 6-15V
CMOS and the ULN2805A is designed to sink a
minimum of 350mA for standard and Schot tky TT L
where higher out p ut curr ent is re quired.
All types are supplied in a 18-lead plastic DIP with
a copper lea d from and feature t he convenient inp utopposite -ou tput pin out to si m plif y boa rd lay out .
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any inf ringement of patents or other rights of third parties which may result from its use. No
license is g ranted by implication or otherwise under any patent or pa tent rights of ST Microelectronics. Specific ations mentioned i n this
publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written
approval of STMicroelec troni cs.
The ST logo is a regi stered tradem ark of ST Microe lectronics .
All other names are t he property of their respec tive owners