ST MICROELECTRONICS STP60NF06L Datasheet

STP60NF06L - STP60NF06LFP

3

N-channel 60V - 0.012Ω - 60A - TO-220/D2PAK/TO-220FP

General features

Type V

STB60NF06L 60V <0.014Ω 60

STP60NF06L 60V <0.014Ω 60A

STP60NF06LFP 60V <0.014Ω 60A

1. Refer to SOA for the max allowable current values on
FP-type due to Rth value

■ Exceptional dv/dt capability

■ 100% avalanche tested

■ Application oriented characterization

■ 175°C operating range

■ Low threshold drive

DSS

Description

R

DS(on)

STB60NF06L

STripFET™ II Power MOSFET

I

D

(1)

D2PAK

Internal schematic diagram

3

1

TO-220FP

3

2

1

TO-220

2

1

This Power MOSFET series realized with
STMicroelectronics unique STripFET process has
specifically been designed to minimize input
capacitance and gate charge. It is therefore
suitable as primary switch in advanced high­efficiency isolated DC-DC converters for Telecom
and Computer application. It is also intended for
any application with low gate charge drive
requirements.

Applications

■ Switching application

Order codes

Part number Marking Package Packaging

STB60NF06LT4 B60NF06L D

STP60NF06L P60NF06L TO-220 Tube

STP60NF06LFP P60NF06LFP TO-220FP Tube

2

PAK Tape & reel

June 2006 Rev 3 1/16

www.st.com

16

Contents STB60NF06L - STP60NF06L - STP60NF06LFP

Contents

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2/16

STB60NF06L - STP60NF06L - STP60NF06LFP Electrical ratings

1 Electrical ratings

Table 1. Absolute maximum ratings

Symbol Parameter Value Unit

2

D

PAK

TO-220

TO-220FP

Drain-source voltage (VGS = 0) 60 V

Drain-gate voltage (RGS = 20 kΩ)60V

Gate- source voltage ± 15 V

Drain current (continuous) at TC = 25°C 60 60

Drain current (continuous) at TC = 100°C 42 42

Drain current (pulsed) 240 240

Total dissipation at TC = 25°C 110 30 W

V

I

V

DGR

V

DM

P

I

I

DS

GS

D

D

(2)

tot

Derating Factor 0.73 0.2 W/°C

(3)

dv/dt

E

AS

V

ISO

T

stg

T

j

1. Refer to SOA for the max allowable current values on FP-type due to Rth value

2. Pulse width limited by safe operating area.

3. ISD ≤ 60A, di/dt ≤600A/µs, VDD ≤ 48V, Tj ≤ T

4. Starting Tj = 25 °C, ID = 30A, VDD = 30V

Peak diode recovery voltage slope 20 V/ns

(4)

Single pulse avalanche energy 320 mJ

Insulation withstand voltage (DC) -- 2000 V

Storage temperature

-65 to 175 °C

Max. operating junction temperature

JMAX

(1)

(1)

(1)

A

A

A

Table 2. Thermal data

D2PAK

TO-220

Rthj-case Thermal resistance junction-case Max 1.36 5.0 °C/W

Rthj-amb

Rthj-pcb

T

Thermal resistance junction-ambient
Thermal resistance junction-pcb
Maximum lead temperature for soldering

l

(1)

Max
Max

purpose

1. Only for SMD, When mounted on 1 inch2 FR-4 board, 2 oz of Cu.

TO-220FP

62.5
35

300

°C/W
°C/W

°C

3/16

Electrical characteristics STB60NF06L - STP60NF06L - STP60NF06LFP

2 Electrical characteristics

(T

=25°C unless otherwise specified)

CASE

Table 3. On/off states

Symbol Parameter Test conditions Min. Typ. Max. Unit

V

(BR)DSS

I

DSS

I

GSS

V

GS(th)

R

DS(on)

Drain-source
breakdown voltage

Zero gate voltage
drain current (V

GS

Gate-body leakage
current (V

DS

= 0)

= 0)

ID = 250µA, VGS =0 60 V

V

= Max rating

DS

VDS = Max rating,

= 125°C

T

C

1

10

VGS = ± 15V ±100 nA

Gate threshold voltage VDS = VGS, ID = 250µA 1 V

Static drain-source on
resistance

= 5V, ID = 30A

V

GS

= 10V, ID = 30A

V

GS

0.014

0.012

0.016

0.014

Table 4. Dynamic

Symbol Parameter Test conditions Min. Typ. Max. Unit

Forward

(1)

g

fs

transconductance

V

= 15V, ID= 30A 20 S

DS

µA
µA

Ω

Ω

C

C

oss

C

t

d(on)

t

t

d(off)

t

Q
Q
Q

1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.

Input capacitance

iss

Output capacitance
Reverse transfer

rss

capacitance

Turn-on delay time
Rise time

r

Turn-off delay time
Fall time

f

Total gate charge

g

Gate-source charge

gs

Gate-drain charge

gd

= 25V, f = 1MHz,

V

DS

VGS = 0

= 30V, ID = 30A

V

DD

=4.7Ω VGS = 4.5V

R

G

(see Figure 15)

VDD = 48V, ID = 60A,

= 4.5V, RG=4.7Ω

V

GS

(see Figure 16)

2000

360
125

35

220

55
30

35
10
20

pF
pF
pF

ns
ns
ns
ns

66 nC

nC
nC

4/16

STB60NF06L - STP60NF06L - STP60NF06LFP Electrical characteristics

Table 5. Source drain diode

Symbol Parameter Test conditions Min. Typ. Max. Unit

I

SD

I

SDM

V

SD

t

Q

I

RRM

1. Pulse width limited by safe operating area.

2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %

Source-drain current
Source-drain current

(1)

(pulsed)

(2)

Forward on voltage ISD = 60A, VGS = 0 1.3 V

Reverse recovery time

rr

Reverse recovery charge

rr

Reverse recovery current

ISD = 60A, di/dt = 100A/µs,
VDD = 30V, Tj = 150°C
(see Figure 17)

110
250

4.5

60

240

A
A

ns

nC

A

5/16

Electrical characteristics STB60NF06L - STP60NF06L - STP60NF06LFP

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance

Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP

Figure 5. Output characterisics Figure 6. Transfer characteristics

6/16

STB60NF06L - STP60NF06L - STP60NF06LFP Electrical characteristics

Figure 7. Transconductance Figure 8. Static drain-source on resistance

Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations

Figure 11. Normalized gate threshold voltage

vs temperature

Figure 12. Normalized on resistance vs

temperature

7/16

Electrical characteristics STB60NF06L - STP60NF06L - STP60NF06LFP

Figure 13. Source-drain diode forward

characteristics

Figure 14. Normalized breakdown voltage

temperature

8/16

STB60NF06L - STP60NF06L - STP60NF06LFP Test circuit

3 Test circuit

Figure 15. Switching times test circuit for

resistive load

Figure 17. Test circuit for inductive load

switching and diode recovery times

Figure 16. Gate charge test circuit

Figure 18. Unclamped Inductive load test

circuit

Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform

9/16

Package mechanical data STB60NF06L - STP60NF06L - STP60NF06LFP

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com

10/16

STB60NF06L - STP60NF06L - STP60NF06LFP Package mechanical data

D2PAK MECHANICAL DATA

TO-247 MECHANICAL DATA

DIM.

A 4.4 4.6 0.173 0.181

A1 2.49 2.69 0.098 0.106

A2 0.03 0.23 0.001 0.009

B 0.7 0.93 0.027 0.036

B2 1.14 1.7 0.044 0.067

C 0.45 0.6 0.017 0.023

C2 1.23 1.36 0.048 0.053

D 8.95 9.35 0.352 0.368

D1 8 0.315

E 10 10. 4 0.393

E1 8.5 0.334

G 4.88 5.28 0.1 92 0.208

L 15 15.85 0.590 0.625

L2 1 .27 1.4 0.050 0.055

L3 1 .4 1.7 5 0.055 0.068

M 2.4 3.2 0.094 0.126

R0.4 0.015

V2 0º 4º

MIN. TYP MAX. MIN. TYP. MAX.

mm. inch

3

1

11/16

Package mechanical data STB60NF06L - STP60NF06L - STP60NF06LFP

DIM.

mm. inch

MIN. TYP MAX. MIN. TYP. MAX.

A 4.40 4 .60 0.173 0.181

b 0.61 0.88 0. 024 0.034

b1 1.15 1.70 0.045 0.066

c 0.49 0.70 0.019 0.027

D 15.25 15.75 0.60 0.620

E 10 10.40 0.393 0.409

e 2.40 2.70 0. 094 0.106

e1 4.95 5.15 0.194 0.202

F 1.23 1.32 0.048 0.052

H1 6.20 6 .60 0.244 0.256

J1 2.40 2 .72 0.094 0.107

L 13 14 0.511 0.551

L1 3.50 3.93 0.137 0.154

L20 16.40 0.645

L30 28.90 1.137

øP 3.75 3.85 0.147 0.151

Q 2 .65 2.95 0.104 0.116

TO-220 MECHANICAL DATA

12/16

STB60NF06L - STP60NF06L - STP60NF06LFP Package mechanical data

TO-220FP MECHANICAL DATA

DIM.

A 4.4 4.6 0.173 0.181

B 2.5 2.7 0.098 0.106

D 2.5 2.75 0.098 0.108

E 0.45 0.7 0.017 0.027

F 0.75 1 0.030 0.039

F1 1.15 1.7 0.045 0.067

F2 1.15 1.7 0.045 0.067

G 4.95 5.2 0.195 0.204

G1 2.4 2.7 0.094 0.106

H 10 10.4 0.393 0.409

L2 16 0.630

L3 28.6 30.6 1.126 1.204

L4 9.8 10.6 .0385 0.417

L5 2.9 3.6 0.114 0.141

L6 15.9 16.4 0.626 0.645

L7 9 9.3 0.354 0.366

Ø 3 3.2 0.118 0.126

MIN. TYP MAX. MIN. TYP. MAX.

mm. inch

E

A

D

B

L3

L6

L7

F1

F

G1

H

F2

123

L4

L2

L5

G

13/16

Packing mechanical data STB60NF06L - STP60NF06L - STP60NF06LFP

5 Packing mechanical data

D2PAK FOOTPRINT

TAPE AND REEL SHIPMENT

REEL MECHANICAL DATA

DIM.

A 330 12.992

B 1.5 0.059

C 12.8 13.2 0.504 0.520

D 20.2 0795

G 24.4 26.4 0.960 1.039

N 100 3.937

T 30.4 1.197

mm inch

MIN. MAX. MIN. MAX.

TAPE MECHANICAL DATA

DIM.

A0 10.5 10.7 0.413 0.421

B0 15.7 15.9 0.618 0.626

D 1.5 1.6 0.059 0.063

D1 1.59 1.61 0.062 0.063

E 1.65 1.85 0.065 0.073

F 11 .4 11.6 0.449 0.456

K0 4.8 5.0 0.189 0.197

P0 3.9 4.1 0.153 0.161

P1 11.9 12.1 0.468 0.476

P2 1.9 2.1 0.075 0.082

R 50 1.574

T 0.25 0.35 0.0098 0.0137

W 23.7 24.3 0.933 0.956

* on sales type

mm inch

MIN. MAX. MIN. MAX.

BASE QTY BULK QTY

1000 1000

14/16

STB60NF06L - STP60NF06L - STP60NF06LFP Revision history

6 Revision history

Table 6. Revision history

Date Revision Changes

21-Jun-2004 2 Complete version

26-Jun-2006 3 New template, no content change

15/16

STB60NF06L - STP60NF06L - STP60NF06LFP

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2006 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

16/16