ST MICROELECTRONICS STP 36NF06L STM Datasheet

N-channel 60V - 0.032Ω - 30A - TO-220 - D2PA K

General features

Typ e V

STP36NF06L 60V < 0.04Ω 30A

STB36NF06L 60V < 0.04Ω 30A

DSS

R

DS(on)

STP36NF06L

STB36NF06L

STripFET™ II Power MOSFET

I

D

■ Exceptional dv/dt capability

■ 100% avalanche tested

■ Low threshold drive

Description

This Power MOSFET is the latest development of
STMicroelectronics unique “Single Feature
Size™” strip-based process. The resulting
transistor shows extremely high packing density
for low on-resistance, rugged avalanche
characteristics and less critical alignment steps
therefore a remarkable manufacturing
reproducibility.

Applications

■ Switching application

3

1

D²PAK

TO-220

Internal schematic diagram

3

2

1

Order codes

Sales type Marking Package Packaging

STP36NF06L P36NF06L TO-220 Tube

STB36NF06L B36NF06 D²PAK Tape & reel

June 2006 Rev 3 1/14

www.st.com

14

Contents: STP36NF06L - STB36NF06L

Contents:

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2/14

STP36NF06L - STB36NF06L Electrical ratings

1 Electrical ratings

Table 1. Absolute maximum ratings

Symbol Parameter Value Unit

Drain-source Voltage (VGS=0)

DS

Drain-gate voltage (RGS=20KΩ)

Gate-source voltage ±18 V

GS

Drain-current (continuos) at Tc=25°C 30 A

D

Drain-current (continuos) at Tc=100°C 21 A

D

(1)

Drain-current (pulsed) 120 A

60 V

60 V

Total dissipation at Tc=25°C 70 W

V

I

P

V

DGR

V

I

I

DM

TOT

Derating factor 0.47 W/°C

(2)

dv/dt

E

AS

T

T

1. Pulse width limited by safe operating area.

2. ISD ≤30A, di/dt ≤400A/µs, VDD < V

3. Starting Tj=25°C, ID=15A, VDD=30V

Peak diode recovery voltage slope 10 V/ns

(3)

Single pulse avalanche energy 225 mJ

Operating junction temperature

j

Storage temperature

stg

(BR)DSS.

Tj < Tjmax

-55 to 175 °C

Table 2. Thermal resistance

Symbol Parameter Value Unit

Rthj-case Thermal resistance junction-case max 2.14 °C/W

Rthj-amb Thermal resistance junction-ambient (free air) max 62.5 °C/W

T

Maximum lead temperature for soldering purpose 300 °C

l

3/14

Electrical characteristics STP36NF06L - STB36NF06L

2 Electrical characteristics

(T

=25°C unless otherwise specified)

CASE

Table 3. Static

Symbol Parameter Test condictions Min. Typ. Max. Unit

V

(BR)DSS

I

DSS

I

GSS

V

GS(th)

R

DS(on)

Drain-source breakdown
voltage

Zero gate voltage drain
current (VGS=0)

Gate-body leakage current

=0)

(V

DS

Gate Threshold Voltage

Static drain-source on
resistance

=250µA, VGS=0

I

D

V

=Max rating

DS

V

=Max rating Tc=125°C

DS

=±18V

V

GS

V

DS=VGS, ID

=250µA

VGS=10V, ID=15A

V

=5V, ID=15A

GS

60 V

110µA

±100 nA

12.5V

0.032

0.045

0.04

0.05ΩΩ

Table 4. Dynamic

Symbol Parameter Test condictions Min Typ Max Unit

C

gfs

C

C

Q
Q

Forward transconductance V

Input capacitance

iss

Output capacitance

oss

Reverse transfer capacitance

rss

Q

Total gate charge

g

Gate-source charge

gs

Gate-drain charge

gd

=15V, ID=15A 15 S

DS

660

=25V, f=1MHz,VGS=0

V

DS

170

70

VDD=30V, ID=30A

=5V

V

GS

13

4.2

7.8

17 nC

µA

pF
pF
pF

nC
nC

4/14

STP36NF06L - STB36NF06L Electrical characteristics

Table 5. Switching on/off (inductive load)

Symbol Parameter Test condictions Min. Typ. Max. Unit

=30V, ID=15A

V

t

d(on)

t

d(off)

Turn-on delay Time

t

Rise time

r

Turn-off delay time

t

Fall time

f

DD

=4.7Ω, VGS=5V

R

G

(see Figure 14)

V

=30V, ID=15A

DD

=4.7Ω, VGS=5V

R

G

(see Figure 14)

10
80

19
13

ns
ns

ns
ns

Table 6. Source Drain Diode

Symbol Parameter Test condictions Min. Typ. Max. Unit

I

SD

I

SDM

V

SD

Q

I

RRM

1. Pulse width limited by safe operating area.

2. Pused: pulse duration=300µs, duty cycle 1.5%

Source-drain current

(1)

Source-drain current (pulsed)

(2)

Forward on voltage ISD=24A, VGS=0 1.5 V

Reverse recovery time

t

rr

Reverse recovery charge

rr

Reverse recovery current

=20A, VDD=20V,

I

SD

di/dt=100A/µs, Tj=150°C

55

107

3.9

30

120AA

ns
nC

A

5/14

Electrical characteristics STP36NF06L - STB36NF06L

2.1 Electrical characteristics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance

Figure 3. Output characteristics Figure 4. Transfer characteristics

Figure 5. Transconductance Figure 6. Static drain-source on resistance

6/14

STP36NF06L - STB36NF06L Electrical characteristics

Figure 7. Gate charge vs gate-source voltage Figure 8. Capacitance variations

Figure 9. Normalized gate thereshold voltage

Figure 11. Normalized B

vs temperature

vs temperature

Vdss

Figure 10. Normalized on resistance vs

temperature

7/14

Test circuit STP36NF06L - STB36NF06L

3 Test circuit

Figure 12. Unclamped inductive load test

circuit

Figure 14. Switching times test circuit for

resistive load

Figure 13. Unclamped inductive wafeform

Figure 15. Gate charge test circuit

Figure 16. Test circuit for inductive load

switching and diode recovery times

8/14

Figure 17. Switching time waveform

STP36NF06L - STB36NF06L Package mechanical data

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com

9/14

Package mechanical data STP36NF06L - STB36NF06L

TO-220 MECHANICAL DATA

DIM.

A 4.40 4.60 0.173 0.181

b 0.61 0.88 0. 024 0.034

b1 1.15 1.70 0.045 0.066

c 0.49 0.70 0.019 0.027

D 15.25 15.75 0 .60 0.620

E 10 10.40 0.393 0.409

e 2.40 2.70 0. 094 0.106

e1 4.95 5.15 0.194 0.202

F 1.23 1.32 0.048 0.052

H1 6.20 6.60 0.244 0.256

J1 2.40 2.72 0.094 0.107

L 13 14 0.511 0.551

L1 3.50 3.93 0.137 0.154

L20 16.40 0.645

L30 28.90 1.137

øP 3.75 3 .85 0.147 0.151

Q 2.65 2.95 0.104 0.116

MIN. TYP MAX. MIN. TYP. MAX.

mm. inch

10/14

STP36NF06L - STB36NF06L Package mechanical data

D2PAK MECHANICAL DATA

TO-247 MECHANICAL DATA

DIM.

A 4.4 4.6 0.173 0.181

A1 2.49 2.69 0.098 0.106

A2 0.03 0.23 0.001 0.009

B 0.7 0.93 0.027 0. 036

B2 1.14 1.7 0.044 0.067

C 0 .45 0.6 0.017 0.023

C2 1.23 1.36 0.048 0. 053

D 8 .95 9.35 0.352 0.368

D1 8 0.315

E 10 10.4 0.393

E1 8.5 0.334

G 4.88 5.28 0.192 0. 208

L 15 15.85 0.590 0.625

L2 1.27 1.4 0.050 0.055

L3 1.4 1.75 0.055 0.068

M 2.4 3.2 0.0 94 0.126

R0.4 0.015

V2 0º 4º

MIN. TYP MAX. MIN. TYP. MAX.

mm. inch

3

1

11/14

Packaging mechanical data STP36NF06L - STB36NF06L

5 Packaging mechanical data

D2PAK FOOTPRINT

TAPE AND REEL SHIPMENT

REEL MECHANICAL DATA

DIM.

A 330 12.992

B 1.5 0.059

C 12.8 13.2 0.504 0.520

D 20.2 0795

G 24.4 26.4 0.960 1.039

N 100 3.937

T 30.4 1.197

mm inch

MIN. MAX. MIN. MAX.

TAPE MECHANICAL DATA

DIM.

A0 10.5 10.7 0.413 0.421

B0 15.7 15.9 0.618 0.626

D 1.5 1.6 0.059 0.063

D1 1.59 1.61 0.062 0.063

E 1.65 1.85 0.065 0.073

F 11.4 11.6 0.449 0.456

K0 4.8 5.0 0.189 0.197

P0 3.9 4.1 0.153 0.161

P1 11.9 12.1 0.468 0.476

P2 1.9 2.1 0.075 0.082

R 50 1.574

T 0.25 0.35 0.0098 0.0137

W 23.7 24.3 0.933 0.956

* on sales type

mm inch

MIN. MAX. MIN. MAX.

12/14

BASE QTY BULK QTY

1000 1000

STP36NF06L - STB36NF06L Revision history

6 Revision history

Table 7. Revision history

Date Revision Changes

14-Jun-2003 1 First release

13-Mar-2006 2 Complete version

26-Jun-2006 3 New template, no content change

13/14

STP36NF06L - STB36NF06L

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2006 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

14/14