STL Trigger-Beam LED Flashlight, J-TB220 Instruction Manual

2809 Business Park Dr • Buda • Texas •78610

Phone [phone] • Fax [phone] • Email [e-mail]

STL Trigger-Beam LED Flashlight Instruction Manual

Product structure:

Technical parameter:

Dimension

Weight

Light source CREE high-power LED

Beam brightness 220 Lumens

Rechargeable Battery

Non-rechargeable

batteries

Outer casing material

Surface treatment

Lens material FCL lens

Cruising Time 100% Brightness-186 minutes, 10% Brightness-3300 minutes

Operation：

1. Battery Installation，twist the end cap off, slide the 18650 battery positive

end upward into the flashlight and twist on the end cap to secure the battery.

2. Gently push the back switch to change between high, low and strobe

functionality on the flashlight.

3. Press the back switch in all the way to power the flashlights on & off.

Charging:

1. Rotate the grab handle counter-clockwise until the circular plug is fully

accessible.

2. Plug in the flashlight charger to the flashlight and the light on the wall or car

charger plug will activate showing the charger is in effect.

3. The flashlight will need to be in the On position in order for the flashlight to

begin charging. The light indicator on the charger will turn red when the

flashlight is in the on position meaning the flashlight is charging and not yet fully

5.7"L x 1.34" lamp diameter x 1.02" handle diameter

130G

18650 Rechargeable lithium battery

(2) 123 Size Batteries

Aluminum 6061-T6

Titanium black

2809 Business Park Dr • Buda • Texas •78610

Phone [phone] • Fax [phone] • Email [e-mail]

charged. The light indicator will turn green once the flashlight is fully charged. (Click the power button on the

flashlight to ensure it is in the correct position when connecting) 4 Hours = Full Charge.

4. Once the battery is full, remove the charger and twist the handle clockwise to secure the flashlight.

5. You can use a rechargeable 18650 lithium battery or use (2) 123 Size batteries.