STL SC UL 001 User Manual

Operating elements

1 Camera body 11 SOCAM interface port
2 Clip attachment 12 Protective cover
3 Camera lens 13 MicroUSB socket
4 Lens adjustment ring 14 Phone jack plug
5 Front cover 15 Image button
6 Screw 16 Video button
7 MicroSD card slot 17 Burst button
8 Battery plug 18 M button
9 Battery
10Micro HDMI socket

Battery

Inserting/Removing battery

1. Loosen the screw and remove the front cover.

2. If you install a battery for the first time remove any protective foils before inserting.

3. With the cable facing up slide the battery into the battery slot. There is no fixed
direction.

4. Connect the battery plug to the corresponding socket. Connection is only possible in
one direction.

5. Lay the cable flat across the battery and put the front cover in place again. Make sure
the cable is not pinched. Tighten the screw.

6. To remove the battery follow the steps in reverse order.

Battery status

A depleted battery has the consequence of the device shutting down automatically.
The Socam will notify you of a depleted battery in two different ways:

• 10 minutes before shutdown: The LED of button flashes with a 1 second interval
(slow).

• 5 minutes before shutdown: The LED of button flashes with a 0.5 second interval
(fast).