St Ives ELIPSAL BISTRO TABLE, TEXTILENE FOLDING ARMCHAIR Instruction Manual
L1200 x W700 x H740mm
ST IVES ELIPSAL BISTRO TABLE
Instruction Manual
FSC Eucalyptus
1
Warnings
Important:
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Do’s
When you are ready to start, make sure that you have the right tools,
plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on top of
the carton box or on a clean floor to prevent it from scratching.
Check the pack and make sure you have all the parts listed.
Check all screws or bolts are tightened and inspect regularly.
Make sure the legs remain in contact with the ground.
We recommend the use of furniture covers to protect your product
when not in use.
During bad weather and winter months the product should be stored
in a cool dry place. Before storage ensure that it is clean and dry.
Timber is a natural product and contains coloured resins which may
initially bleed out of the timber when its gets wet. Therefore we
recommend that care is taken to protect patios and decking from
possible staining where the product comes into contact with the
ground. The furniture will stabilise in its environment after the first
few times it gets wet.
Wood is a natural material whose appearance will deteriorate when
left outside. A surface coating is vital in protecting it from premature
darkening, or splitting, when exposed to the weather. The finish
should be regularly maintained to ensure that the wood is proctected
from moisture and the furniture continues to look at its best.
This product has been treated with furniture oil during manufacture
and the wood requires further treatment before being left out side.
When applying furniture oil particular care should be given to the end
grain and any joints or crevices, please note that is the products
needs to be put together the first coat should be applied to all wood
surfaces before assembly.
To prolong the life of this wooden furniture, it should be protected
from severe weather and stored under cover during winter. A liberal
coating of furniture oil should be given to the furniture before it is laid
up, and again when it is removed from storage.
Don't’s
Do not use power tools to construct this product.
Do not tighten screws until fully assembled.
Do not overtighten screws or bolts.
Do not use this product if parts are missing, damaged or worn.
Do not sit or stand on the product.
Never use a pressure hose or washer to clean the product.
Ne
ver use scourers, abrasives or chemical cleaners.
See enclosed instructions for assembly, safety and care information.
Failure to follow the warnings could result in serious injury.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
K
entrapment or injury
eep hands away from folding mechanisms to prevent possible
To clean wipe with a sponge and warm soapy water then wipe
with a dry, clean cloth.
Should you choose not to treat your furniture, then it will turn a
greyish colour and develop cracks. Light sanding can restore the
original colour after which furniture oil can be regularly applied in
accordance with the instructions above.
2
Instruction Manual
ST IVES ELIPSAL BISTRO TABLE
Assembly Instruction
ST IVES ELIPSAL BISTRO TABLE
Ref code Size (mm) Ilustration Qty
Fitting list
3
1
2
3
850 x 895 x 100
1200 x 700 x 65
1
1
1
850 x 850 x 100
Ref code
Size (mm)
Ilustration Qty
Component list
Ref code Size Ilustration Qty
A
B
C
6
6
6
2
Φ8/18 x 15
Φ8/22 x 2
Φ8 x 35
M4
Tool supplied
Loading...