SOLAR STEPSTONE Instruction Manual
Model 6101
SOLAR STEPSTONE Instruction Manual
Model 6101
3. OVERVIEW
The Solar Stepstone has been designed for outdoor use. The solar
module in the center part converts sunlight into electricity, which is
then stored in the integral rechargeable battery pack. The light
switches on automatically when it gets dark and turns itself off
when it get light or when the battery is fully discharged. The
source of light comes from two premium amber LEDs (light emitting
diode), which provides bright light but uses very little electricity. In
order for the light to operate, the solar module needs to be placed
in direct sunlight. The performance of the light e.g. the charging of
the battery depends on the season.
4. COMPONENTS
5. ASSEMBLING AND USING
YOUR PRODUCT
Unpack all components carefully.
Turn the Solar Stepstone upside down.
Switch set to “0” (off position):
The solar panel does not charge the battery nor does the light
function at night.
Switch set to “I” (on position):
The solar panel charges the battery and the light will switch on in
the evening and switch off in the morning automatically.
Decide on a suitable location.
6. CLEANING AND MAINTENANCE
Removing / Replacing the batteries:
Use only original Smart Solar batteries. Turn the light unit upside
down and place the solar module on a soft surface.
Unscrew the 4 crosshead screws from the battery box.
Disconnect the battery and take out the battery pack.
A new battery is fitted in reverse order.
Please note:
Used batteries must be disposed of carefully with regard to the
environment and should NOT be put into the family waste.
1 Light unit with integral solar module, battery pack, LEDs
and “on - off” switch
1
PANEL PERFORMANCE
MIN. MIN.
MAX.
CONDITION FUNCTIONALITY
SEASONAL FUNCTIONALITY
OPTIMUM
LOW
LOW
MEDIUM
GOOD
MEDIUM
WINTER
SPRING
AUTUMNSUMMER
Unscrew the crosshead screws
Remove the cover plate
Remove and replace the battery