Page 1
COMPONENTS
4 Gauge
Adapter
4mm
Cover
LINK
XFDB108
WARNING!
NEVER use the XLINK Jumpers in place of a fuse
Cover any unused input with an Input Plug
LINKABLE FUSED DISTRIBUTION BLOCK
UNIVERSAL 0-8GA POWER OR GROUND
8 Gauge
Adapter
AFS/Mini ANL
Fuse Mount
Ground Jumper
ANL
Fuse Mount
XLINK
INSTALLATION GUIDE
XLINK X-Pansion Jumper
WARNING! NEVER use the XLINK jumpers in place of a fuse.
*
QUICK TIPS
XLINK Interlocking Base
To connect 2 or more XLINKS,
align locking channel and
press together.
4 Gauge
Adapter
*
Input
Plug
8 Gauge
Adapter
XLINK systems should not exceed 500 AMP in total fusing
Stinger is a Power Brand of AAMP Global
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
XFDB108 PATENT PENDING
Technical Support: 800-477-2267
StingerElectronics.com
support@stingerelectronics.com
XLINK X-Pansion Jumper
Distribute power or ground across multiple
XLINK blocks by connecting the X-Pansion
jumper to input side of block.
Connecting this way; if a single circuit blows a
fuse, the XLINK block will continue providing to
power to the other circuits.
Wire Set Screw
XLINK Gauge Adapters
Convert to any combination of
0GA, 4GA or 8GA inputs and
outputs. Make sure the adapter opening
lines up with the wire set screw.
© Copyright 2018
Page 2
SINGLE BLOCK
125A
125A
Single ANL Fuse Holder
- 1/0GA, 4GA, 8GA Input/Output
125A
125A
GROUND BLOCK
XLINK Ground Jumper
1/0 GA Ground
1/0 GA Ground
XLINK Ground Jumper
- 1/0GA, 4GA, 8GA Input/Output
POWER BLOCK
+
1/0 GA 12V(+) Positive
+
125A
200A
ANL FUSE
125A
200A
Single AFS Fuse Holder
- 1/0GA, 4GA, 8GA Input/Output
Fused 1/0 GA 12V
+
+
1/0 GA 12V(+) Positive
X-pansion Jumpers
125A
125A
125A
125A
4 GA Ground
8 GA Ground
COMBO BLOCK
1/0 GA Ground
Fused 4 GA 12V
Fused 4 GA 12V
+
+
X-pansion Jumpers
Fused 4 GA 12V
Fused 8 GA 12V
AFS/MINI ANL FUSES
+
+
X-pansion Jumpers
4 GA Ground
4 GA Ground
1/0 GA Ground
Loading...