Page 1
OWNER’S MANUAL
NEED WARRANTY OR SERVICE?
BEFORE RETURNING THIS PRODUCT TO
RETAILER FREE CALL OUR CUSTOMER SERVICE
DEPARTMENT ON 1 800 677 981
MOSQUITOES:
BITING MIDGES (SANDFLIES):
NON BITING FLIES:
CODDLING MOTHS:
Mosquitoes are blood sucking insects that are responsible for
the transmission of many diseases. Within Australia there are
more than 300 different species of mosquito. Several important
human diseases are transmitted by these insects including
Dengue fever, Australian encephalitis, Ross River virus disease
and Barmah Forest virus disease. Mosquitoes also cause
lifestyle problems, through their persistent biting spoiling
recreational and social activities.
Biting midges or sandflies as they are called in Australia are
small robust insects with piercing and sucking mouthparts.
These small flies are renowned for their nuisance biting in
coastal areas around lagoons, estuaries, mangrove swamps and
tidal flats. The biting activity of adult is mainly limited to the
periods of dawn and dusk; they will remain inactive through
very windy weather, Female midges may attack humans in
large numbers, biting on any areas of exposed skin, and often
on the face, scalp and hands..
Non-biting flies are often associated with domestic dwellings,
especially throughout the warmer months when they bred
prolifically, invading homes. Non-biting Australian flies contain
many species that are responsible for contamination and
spoilage of foodstuffs, annoyance, mechanical transmission of
disease-causing pathogens, and invasion of living tissues
(myiasis). Collectively known as "filth flies", they are distributed
throughout the families of Calliphoridae (blow flies),
Sarcophagidae (flesh flies) and Muscidae (house flies).
In Australia, there are over 10,000 species of moths. Most of
the Caterpillars are the larvae of moths. The caterpillars feed
at night and chew plants off at ground level. During the day,
the caterpillars hide under clods of dirt or litter on the soil.
Army Worm is a grass eating caterpillar that moves through
the lawn like a raiding army and can reduce grass leaves to
tattered shreds almost overnight. Cutworms are caterpillar
pests that cause damage to crops and are a major problem for
agricultural and horticultural industries of Australia
Copyright © & Trade Marks
™™™™
The material used for the production of this owners manual including text, graphics
and layout are owned by The Kelly Company Pty Ltd and protected by copyright
under the laws of Australia. This Manual also includes registered trade marks and
trade marks which are the subject of pending applications by The Kelly Company
Pty Ltd and are protected by trade mark laws of Australia
Electronic Bug Killer
SBK-26ESL & SBK-40ESL
with NEW Energy Saving Lamps
20 TUCKS ROAD SEVEN HILLS SYDNEY
NSW 2147 AUSTRALIA
Page 2
IMPORTANT SAFETY INSTRUCTIONS:
DO NOT ATTEMPT TO REMOVE THE HOOD OR CAGE (LOWER) SECTION
Heed Warnings & Retain Instructions: All warnings on the appliance and in the operating
instructions should be adhered to.
Water & Moisture: The appliance should not be used near water, for example over pond,
bath tubs, kitchen sinks or above a swimming pool. WARNING: An electric shock hazard
may exist if water from a garden hose is directed at the insect killer
Young Children / Infirm Persons: This appliance is not intended for use by young children
or infirm persons unless they have been adequately supervised by a responsible person
to ensure that they can use the appliance safely.
Children: This appliance is to be kept out of the reach of children and young children should
be supervised to ensure that they do not play with the appliance
Flammable Vapors: This appliance is not to be used in locations where flammable vapor
or explosive dust is likely to exist
Heat: The appliance should be situated away from heat sources such as radiators, stoves
and other appliances that produce heat.
Power Source: The appliance should be powered only as described in these instructions
or as marked on the appliance.
Cleaning: The appliance should be cleaned only as recommended in these instructions
and in accordance with the water and moisture warning stated in this manual
Liquid Entry: Do not submerge the main body of the STINGER in water
Object Entry: Do not place any object through any of the openings in the STINGER
Extension Cord: If required carry out a physical safety check of extension cord before use.
Check for cuts or damage, kinks / twisting, exposed wires, damaged plugs (bent or loose
pins). Avoid improper use of extension cords and keep them away from moisture.
Damage Requiring Service: The appliance should be serviced by a qualified Service
Technician when:
I. Heavy objects have fallen on the appliance
II. The appliance has been dropped or the body of the STINGER has been damaged
III. The appliance does not appear to operate normally or exhibits a marked change
in performance
IV. Supply cord is damaged
Service: The user should not attempt to service the appliance beyond that described in
these operating instructions. All other servicing should be referred to a qualified Service
Technician or returned to The Kelly Company Pty Ltd.
1
STINGER BUG KILLER
REPLACEMENT PART ORDER FORM
Qty Item
Replacement Lamp Stinger SBK 26ESL $22.95
Replacement Lamp Stinger SBK 40ESL $26.95
Catch Tray for Stinger SBK 25 & 40ESL $21.95
Packaging & Post $6.50 $6.50
*Includes GST Total
DELIVER TO:
Name:
Address:
Post Code:
Phone: Email:
PAYMENT BY (please circle):
Cheque Money Order Credit Card
For Credit Card Payment Complete:
Card Number:
Name on Card:
Signature: Expiry Date / /
Mail to:
The Kelly Company Pty Ltd
P.0. Box 516 Blacktown
Sydney NSW 2148
6
IMPORTANT: Identify the
STINGER model; this
information can be found on
the carton or on the rating
label on underside of hood
where lamp connects
STINGER
™™™™
BUG KILLER
Model SBK-26 Cat No: 71383
Replacement Lamp is
26W-ESL Cat. No. 71467
Model SBK-40 Cat No: 71384
Replacement Lamp is
40W-ESL Cat. No. 71468
Page 3
2
Owner’s Manual
Welcome:
Thank you for purchasing the STINGER® Electronic Bug Killer with the new energy
saving black light lamp. This manual will provide you with directions for the safe
and efficient operation of your STINGER. Please read the manual carefully and
keep it in a safe place for future reference. Failure to operate the STINGER in
accordance with the instructions in this manual may cause damage to the unit.
Your new STINGER will provide you with years of safe, trouble free service. The
outer protective screen (cage) has been designed to prevent fingers or foreign
objects from contacting the charged killing grid.
Correct Operation:
I. Your STINGER Electronic Bug Killer is designed to attract and kill light
sensitive flying insects, mosquitoes and moths.
II. During the flying insect season from spring to autumn your STINGER
should be operated from dusk to dawn.
III. Correctly installed and operated STINGER will interrupt the 10-14 day
breeding cycle of the flying insect pests and under normal conditions will
noticeably decrease the insect infestation level.
IV. Your STINGER is IPX4 waterproof rated and rain or moisture will not
affect its operation
Energy Saving UV Black Light Lamp:
The Black Light Lamp is long wave UV and therefore safe. The output / intensity
of the lamp in the invisible ultraviolet frequency range reduces with use. For
maximum attraction of flying insects replace the lamp every 12 months.
2
Correct Positioning:
To achieve maximum performance from your
STINGER please review and observe the following
recommendations:
I. Light sensitive flying insects are
attracted to the black light UV lamp and
when they come into contact with the
electrically charged grid surrounding the
lamp they are instantly killed.
II. For best performance the STINGER
should be installed 8 to 10 metres from
the area you wish to protect (your
outdoor living / entertaining space)
III. The STINGER should be hung 2.5
metres, from the base of the unit, above
ground level using the hanging ring
fitted to the top. Make sure the hanging
ring is securely attached to the hanging
device.
IV. If a power extension lead is used it
MUST be suitable for outdoor use. Keep
the extension lead dry and off the
ground; avoid heat, oil and sharp edges.
Bush or Water
Insect Breeding Area
STINGER
More than one unit may
be required depending upon
size of breeding area
Outdoor Living Area
Minimum
8 Metres
PROBLEM POSSIBLE CAUSE CORRECTION
Black Light UV
Lamp does not
light but there is
zapping on the
killing grid
1. STINGER is not plugged into
a live power point
2. Lamp has dislodged from
lamp holder
3. Lamp had broken in transit
4. Lamp Starter is faulty
1. Check power point and
fuse or circuit breaker
2. Remove lamp/bulb clip
from bottom of unit and
push lamp upwards into
lamp holder
3. Unplug STINGER, remove
lamp/bulb clip on bottom
of unit, remove and
inspect lamp. If broken
replace.
4. Return unit to authorized
Service Centre
Lamp operates
but there is no
zapping on the
killing grid
1. Space between inner and
outer killing grids is too
great
2. Electrical component (PCB)
or wiring fault
1. Unplug unit and adjust
spacing between grids
using a plastic handled,
insulated screw driver
2. Return unit to authorized
Service Centre
Intermittent or
constant zapping
of killing grid
when no insects
are present
1. Space between inner and
outer killing grids is too
small causing arcing
2. Killing grid is clogged with
dead insects or other
material
1. Unplug unit and adjust
spacing between grids
back into alignment using
a plastic handled insulated
screw driver
2. Unplug unit and clean
killing grid by using a air
blower or brush
Unit does not
attract flying
insects during
dusk to dawn
1. STINGER is positioned
incorrectly / in wrong
location
2. Black Light UV Lamp needs
replacing
1. Refer to the ‘Correct
Positioning’ section of this
Manual
Avoid using unit in well lit
areas
2. Unplug unit, remove
lamp/bulb clip from
bottom of unit and
replace. The Black Light
UV Lamp has an effective
life of 12 months after
which insect attraction is
reduced even though the
lamp still operates.
Lamp does not
operate and
killing grid is not
zapping
1. Unit is not plugged into live
power point
2. Electrical component or
wiring failure
1. Check power point and
fuse or circuit breaker
2. Return unit to authorized
Service Centre
5
STINGER
™™™™
BUG KILLER
Page 4
Owner’s Manual
Daytime Pests (Including Flies)
Wasps, hornets, beetles and flies are odour or heat seeking flying pests and do not
respond primarily to black light UV light however increased numbers of these pests
can be lured to your STINGER by baiting.
Bait such as honey, syrup can be applied to a piece of cloth and hung / attached to
the cage or underside of the unit likewise or a piece of uncooked meat can be hung
from the underside. It should be noted that not every flying insect will be lured in
this way however increased numbers of daytime pests will be attracted
Also repositioning of the STINGER may be necessary when attempting to attract
daytime pests. The unit should be relocated to an area of your yard where direct
sunlight and wind can be reduced. This will help increase the output of the black light
UV lamp and the effectiveness of the baits.
WARNING:
The user must not attempt to service the STINGER beyond what is described in the
section below. All other servicing should be carried out by a qualified electrician or
returned to the Service Department at The Kelly Company Pty Ltd at the address
shown on the front cover of this Manual.
The return freight / postage of STINGER being returned to The Kelly Company during
or outside of the warranty period is to be paid by the purchaser. Ensure that the
STINGER is well packed to avoid transport damage as such damage is not covered
under the terms of the Warranty. Also please include written details of the product
failure to minimise time and cost of repair.
Routine Maintenance:
1. Ensure that the STINGER is disconnected from its power source before
performing any type of maintenance
2. Clean the killing grid annually or as required. In areas of heavy infestations of
flying insects grid cleaning may be required monthly or weekly. Use an air
blower or brush to dislodge insects trapped on the killing grid. Do not remove
the cage of the STINGER to clean killing grid.
3. Replace the Black Light UV Lamp annually to ensure maximum output in the
invisible ultraviolet frequency range (see page 3 of this Manual). Replacement
lamps are available through your nearest stockist of STINGER
Lamp Replacement Instructions:
1. Disconnect the unit from its power source
2. Remove the 2 screws retaining the lamp support bulb / lamp clip located on the
underside of the STINGER.
3. Remove the lamp by holding the lugs on the black plastic base and screwing it
anticlockwise while pulling downwards. Replace new lamp by reversing these
instructions
4. Replace the lamp support bulb / lamp clip and secure the 2 screws
Lamp Catalog Number is printed here
WARRANTY:
Congratulations on purchasing the STINGER® electronic bug killer. To ensure that
you achieve the maximum life and performance from this quality appliance from The
Kelly Company please read the following warranty information and complete the
purchase date and retailer / supplier information as this will be needed when making
a warranty claim.
Warranty: The Kelly Company Pty Ltd warrants your STINGER to be free from
defects in materials and workmanship under normal use and service conditions for a
period of 12 months from the date of original purchase. Subject to this warranty
defective units or parts will, at the company’s discretion, be repaired or replaced free
of charge excluding freight or postage to and from The Kelly Company Pty Ltd which
will be paid for by the purchaser.
The provision of this warranty shall not apply to any STINGER which has been
subject to abuse and misuse, neglect or accident. Nor does the warranty apply to
any STINGER that have within the warranty period been used for a purpose for
which the product has not been designed or which has been repaired or altered in
such a way so as to adversely affect its performance and reliability. Service by an
unauthorized source voids the warranty.
The Kelly Company Pty Ltd neither assumes nor authorizes any person to assume for
it any other liability in connection with this product. No responsibility is assumed for
any consequential damage that may result from the use of the STINGER nor for
damages due to accident, abuse, lack of responsible care, the fixing of any
unauthorized attachment, loss of part or subjecting the product to an but the
specified voltage.
Purchase Record: Immediately complete the following Proof of Purchase information
and retain your cash register and credit card receipt as proof of purchase as this will
be required when claiming under this warranty.
Date of Purchase:……………………………………………………………………………………………………………
Retailer / Supplier Name & Address:…………………………………………………………………………….
…………………………………………………………………………………………………………………………………………
Service:
Contact Customer Service at The Kelly Company Pty Ltd 20 Tucks Road Seven Hills
Sydney NSW 2147 Australia on 02 8811 3716 between 9.00 am and 5.00 pm EST
Catalog Number for your STINGER’S Energy Saving Black Light Lamp is
printed on the hub of the Lamp.
4
STINGER
™™™™
BUG KILLER
Loading...