Be sure to write your model number and serial number here
for future reference. You can find these numbers printed on
the bottom of the table.
MODEL NO.: T8580W/F
DATE CODE : CPSIA#2-T8580W/F-_______-SY
PURCHASE DATE : _______________________
OWNER’S MANUA L
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before
assembling or ordering parts.
3. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Leave bolts slightly loose until you are instructed to tighten them.
4. Tools required for assembly: Wrenches or adjustable wrenches (not provided) are helpful.
5. To make assembly as easy as possible, place all parts of the table tennis in a cleared area and
remove the packaging material. Organize all parts as per parts identifier in the assembly manual.
Do not dispose of the packing material until assembly is completed.
6. Avoid scratching table tennis top and metal tube parts during the assembly process.
7. Assemble product on clean, level and flat surface.
8. Take time to correctly orientate parts exactly as per each assembly diagram.
9. Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
READ ASSEMBLY, OPERATING AND SAFETY INSTRUCTIONS
CAUTION:
CAREFULLY! AT LEAST TWO ADULTS ARE NEEDED TO PUT
THIS TABLE TOGETHER!
Thank you for buying our product. We try hard to ensure that our products are of high quality and free of problems, such as
Manufacturing defects or missing parts. However, if you have any problems with your n ew product, please DO NOT RETUR N IT
TO THE STORE!
Please Do Not Return This Product To The Store!
Contact Escalade Sports customer service department at:
Phone: 1-866-873-3528 Toll-Free!
Fax: 1-866-873-3533 Toll-Free!
E-mail: tabletennis@escaladesports.com
Please provide model number and/or part number of the product and/or part when you call or write. These numbers can be found on the
product, packaging, and/or in this Owner’s Manual.
Please visit our website at: www.escaladesports.com
ON-LINE TROUBLE SHOOTING TECHNICAL ASSISTANCE
ON-LINE PARTS REQUESTS FREQUENTLY ASKED QUESTIONS
ADDITIONAL ESCALADE SPORTS PRODUCT INFORMANTION
R
Mailing Address (correspondence only):
Escalade Sports
PO Box 889
Evansville, IN 47706
R
Escalade Sport products may be manufactured and/or licensed under the following patents.
6120397 , 5816957 , 5769744 , 5119741 , 4911085 , 4717157 , D460140 , D420563
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
R
C
2016 Escalade Sports
R
CARE AND MAIN TENANCE
You have purchased a qualit y pro duct that will give you years o f enj oyment. By following t hes e sim ple
maintenance steps, y ou wi ll ad d to the life of your new table.
THE TABLE TOP
The top (playing surface) of your table is made of Mid-Density Board. Like all prod ucts made of wood, it
can be affected by atmospher ic changes in bot h tempe rat ure and humidity. This may cause a slight
sag or distorti on as the t op exp and s o r contracts. This is normal and sh ould n ot cause concern as it
does not detract fro m the p lay o r
the effects of te mpe rature and hu mid ity changes by stor ing the table in a dry area when table is not
in use.
STORAGE OF YOUR TA BLE
This table must be sto red i ndo ors to prevent damage to t he playi ng surface. Da mpn ess and extreme
temperature changes can c aus e the wood to w arp , swell , crack or blister. When your t abl e is not in
use, it should be stored in a dry area. Due to the natur e of p art icle board, tabl e top may bo w.
Damp and humid conditi
ons will amplif y thi s. Th is is normal and will not affect playabili ty of table .
CLEANING YOU R TABLE
To clean your table us e a sof t, da mp (NOT WET) cloth only. T o pre ven t damage to your table’s play ing
surface, DO NO T USE ANY CHEMICALS, ABRASIVE OR CL EANING PROD UCTS on yo ur table’s playing
surface.
MAINTENANCE OF YOUR TABLE
Be sure to oil all movin g par ts of y our table including th e piv ot po ints. This will insure t he sa fet y and ease
of use of your table.
utility value of the t abl e. Af ter assembly of the table, yo u can m inimize
This table must be kep t i ndo ors to pr eve nt dam age to th e play ing surface. Dampness and extreme
temperature changes w hic h occur on patios or similar ar eas c an cau
blister.
se wood to warp, swell , cra ck or
UNLEV E L FLOORS
If table does not seem l eve l, it i s probably due to uneven o r unl eve l floors. Set the table in its PLAY ING
POSITION and move table s eve ral inches in different directio ns to f ind the best location fo r the t abl e.
If the floor is extremely unleve l, ta ble may not play or operat e pro per ly.
I
f table is high in the center, s him up under the outer legs.
The table has leg levelers - Adjust leg levelers as required.
- 2 -
HARDWARE IDENTIFIER (To Scale)
H1 - 8 mm x 45 mm
Hex Head Bolt
(8 pcs)
H2 - 8 mm x 16 mm
Plastic Flat Washer
(16 pcs)
PARTS IDENTIFIER (Not to Scale)
P1 - Table Tennis Table Top
Frame Assembly
(2 pcs)
P2 - Leg with Casters
Assembly
(4 pcs)
H3 - 8 mm Nylon
Lock Nut
(8 pcs)
P3 - Connector
(8 pcs)
P4 - Net Post
(2 pcs)
WARNING:
CHOKING HAZARD
!
Small parts.
Not for children under
3 yrs.
- 3 -
P5 - Net (1 pc)
IMPORTANT NOTE: Place table half top with playing surface face down on a CLEAN flat surface
for ease of correct assembly and to prevent any scratches or blemishes to the playing surface.
PARTS REQUIRED
-
1 pc P1 Table Tennis Table Top Frame Assembly 4 pcs - H1 Hex Head Bolt
2 pcs - P2 Leg with Casters Assembly 8 pcs - H2 Flat Washer
4 pcs - P3 Connector 4 pcs - H3 Lock Nut
STEP 1:
Lay one piece P1 Table Tennis Table Top Frame Assembly flat with playing surface
facing down as shown in FIGURE 1A.
DETAIL A
Unlock the SAFETY LOCK as shown in DETAIL A and raise FRONT LEGS to a
vertical position and lock both hinges as shown in FIGURE 1B & DETAIL B.
This end is the front
of the table.
P1
This end is the middle of the table
and does not have white screen
FIGURE 1A
lines and close to Safety Latch.
DETAIL B
Front Leg.
Hinge Locked
Front Leg.
Safety Lock.
Push down on LOCK TAB
to release lock and pull up
on FRONT LEGS only.
Do not pull up middle legs
as this could cause damage
to the table.
Middle Leg.
PUSH UP
STEP 2:
Install P2 Leg with Casters Assembly with P3 Connectors using
H1 Hex Head Bolts, H2 Flat Washers and H3 Lock Nuts
as shown in FIGURE 2 & DETAIL C. Tighten this hardware.
Repeat procedure for other table top.
FIGURE 2
H3
H2
FIGURE 1B
DETAIL C
P2
P3
H2
H1
- 4 -
WARNING:
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.
PARTS REQUIRED
2 pcs - P4 Net Post
1 pc
- P5 Net
STEP 3:
Attach one P4 Net Post to the middle edge of where the table halves meet.
Repeat this with other P4 Net Post on opposite side.
Then, slide P5 Net into corresponding P4 Net Post and repeat for the other side.
Make sure the white fabric of the net is on top. Use strings at either end of the P5 Net to tighten the net and attach to base of net post
securely.
P5
Net
P4
Net Post
P4
Net Post
IMPORTANT NOTE:
Be sure to break all four(4) hinges, using the palm
of your hand before folding table upright.
Lock hinges when table is in playing positions.
FIGURE 3
NOTE:
Level table using
Leg Levelers.
- 5 -
READ OPERATING INSTRUCTIONS CAREFULLY BEFORE OPERATING TABLE! DO
NOT ALLOW CHILDREN TO OPEN TABLE! DO NOT CLIMB, STAND OR JUMP ON
CAUTION:
TABLE! SERIOUS OR FATAL INJURY MAY RESULT! THIS IS NOT A TOY! TABLE IS
TO BE OPENED OR CLOSED BY ADULTS ONLY! FAILURE TO COMPLY WITH
OPENING AND CLOSING INSTRUCTIONS COULD RESULT IN PERSONAL INJURY OR
PROPERTY DAMAGE.
FOLD THE TABLE:
1. Remove the Net Set and push hinges up as shown in FIGURE 4.
2. Fold each half table as shown in FIGURE 5.
3. Secure table into upright position as shown in FIGURE 6.
REMOVE NET SET
PUSH UP
FIGURE 4
PUSH UP
FIGURE 5
UNFOLD THE TABLE:
1. Push down on Lock Tab to release lock as shown in FIGURE 7.
2. Fold each half table as shown in FIGURE 8.
3. Push down and lock hinges as shown in FIGURE 9.
Unfold the table
PUSH DOWN
FIGURE 7
FIGURE 6
FIGURE 8
ATTACH NET SET
PUSH DOWN
Push down
on Lock Tab
FIGURE 9
- 6 -
Loading...