STIEBEL ELTRON VERTICAL TILT RACK 45 User Manual

OPERATION AND INSTALLATION

ROOF MOUNTING HARDWARE

» VERTICAL TILT RACK 45°

Simply the Best

INSTALLATION INSTRUCTIONS

VERTICAL TILT RACKS - 45 SIDE-BY-SIDE ORIENTATION

Table of Contents

1 Assembling the vertical tilt rack

2 Mounting

2.1 Mounting on an asphalt roof

2.2 Mounting on a raised-seam roof

CAUTION: READ ALL INSTRUCTIONS BEFORE

!



INSTALLING THIS KIT. ADDITIONAL ITEMS WILL

BE NEEDED TO MOUNT THIS ASSEMBLY.

This manual is intended to aid in the installation of 1-4
Stiebel Eltron SOL 27 Premium collectors tilted off of an
asphalt roof in a side-by-side vertical orientation. This
kit allows for quick and easy roof mounting of collectors.
Please contact Stiebel Eltron, or visit our website for more
information.

1. Familiarize yourself with the parts necessary to install
this solar kit. The parts are pictured below:

Part: # of Collectors in Array:

12 3 4

# of Parts Required:

45 Vertical tilt rack 22 3 4
Vertical X-Brace 11 2 2
Single mounting frame kit 10 1 0
Double mounting frame kit 01 1 2
Frame connector kit 00 1 1
Roof attachment kit 44 6 8

3. Begin the assembly by removing the racking
components from their boxes. Insert the M-101 triangular
connector into the inside of the M-103 65˝ rail as shown
below. Using the M10 nuts & bolts, fasten the two parts
together.

2. Consult the table below to make sure you have the
right number of components for the appropriate number of
collectors.

17 West St., W. Hatfi eld, MA 01088

| 800.582.8423 | 413.247.3380 | fax [phone] | [e-mail] | www.stiebel-eltron-usa.com

4. Repeat the process with the other M-103 65˝ rail using
two more M10 nuts & bolts.

5. Again repeat the process with two more M-101
triangular connectors on the ends of each rail.