STI WS110TX User Manual

Wireless

Auto Dialer STI-WS110

Quick Start Guide

Step 1
Enter setup
mode for any
programming

Step 2
Under
SETUP
mode

Step 3
Under
ALERT
mode

To ENTER
SETUP mode

To RECORD
message

To RECORD
an effective
message

To PLAYBACK
message

To CHECK
PHONE
NUMBERS

To
ENTER/STORE
PHONE
NUMBERS

To ERASE a
stored phone
number

To program
the numer of
DIALING
CYCLES

To change the
4-DIGIT PIN

To ENTER
ALERT MODE

EMERGENCY
DIALING

PANIC
DIALING

to activate the keyboard

Press

Enter the 4-DIGIT PIN (Default PIN is "1234")

Press to go into SETUP mode

Press and hold for 2 seconds, until the REC shows

up on the screen to start the recording.

Recording will finish when you press the again or the

recording reached 20 seconds.

Make sure to include information marked " * " for sending proper
message and instructions for help
Example message:
This is a security alert from [ *your resident or business name
here ], at [ *your address here ]. *After having fully listened to
this message, please press the pound key (#) and press " 1 " for
listening, " 3 " for speaking and so forth. Over.

Press and release the to play back the recorded message

Press (Display will show "1" for 1st phone number).

Press

again for checking the other phone numbers

Press (Display will show "1" for 1st phone number),

Repeat this step to choose which phone numbers you

wish to program (1, 2, 3, 4, 5, 6, 7, 8)

Press and enter the phone number digits (Maximum 16 digits)

Press to clear number entered incorrectly and re-enter the

phone number digits again

Press to finish

Press

(Display will show "1" for 1st phone number),

Repeat this step to choose which phone numbers you

wish to ERASE (1, 2, 3, 4, 5, 6, 7, 8)

then to confirm erasing

Press

(Display will show "1" for 1st phone number),

Press

Repeat this step until display show

Press

, enter the number of cycles you wish (1

through 9, default cycle is 3 times)

Press

(Display will show "1" for 1st phone number),

Repeat this step until display show

and enter a new 4-DIGIT PIN

Press

Re-enter your 4-DIGIT PIN and to confirm

Press

back to alert mode

When triggered by an external sensor input, DialerPlus will

immediately dial through telephone numbers according to the

number of dialing cycles you have programmed

Press

and down simultaneously

Press the PANIC button on your KEYFOB remote

and to confirm