STI SUB-6297B20 User Manual

D

C

L

C

BACKBOX

GASKET

INTERSECTION LINE

HUB

A

C

L

B

A

CENTER LINE
OF HOLES A & B

623002 GASKET

19074 KEPS NUT

1/4 - 20 (2) PROVIDED

A

B

A

06297B20 CONDUIT HUB
ACCEPTS 3/4 in. RIGID CONDUIT FITTINGS

19073 HEX HEAD CAP SCREW
1/4-20 x 3/4 in. STAI NLESS
(2) PROVIDED

VIEW IN DIRECTIONS OF ARROW

D

BACKBOX

A

Safety Technology International, Inc.

2

306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800 -888-4784 • E-mail : info@ sti-usa.com
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

U

nit 49G Pipers Road • Park Farm Industrial Estate • Redditch

W

orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

INSTALLATION INSTRUCTIONS - REFER TO EXPLODED VIEW

1. Remove the backing paper from the gasket and attach it to the back of
the hub.

2. Select the location on the back box where conduit hub is to be
mounted.

All specifications and information shown were current as of publication, and are subject to change without notice.

INSTALLATION OF SUB-6297B20 CONDUIT HUB ASSEMBLY

3. Align the center of holes A & B directly on intersection line C.

4. Using a pointed tool, mark a center point in the center of holes A & B
on the intersection line C.

5. Drill three (3) holes: Hole A 7/32 in. diameter, Hole B 1/2 in. diameter.

6. Complete installation as shown.

Electronic warranty form at www.sti-usa.com/wc14

SUB6297 APRIL2006