STI 9745 User Manual

Safety Technology International, Inc.

2

306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-88 8-4784 • E-mai l: info @sti-us a.com
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

U

nit 49G Pipers Road • Park Farm Industrial Estate • Redditch

W

orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

O

UTLET TUNNEL

INLET TUNNEL

INLET TUNNEL

1

SELECT THE INLET TUNNEL TO BE USED,
AND CAREFULLY CUT A SECTION OF
THE TUNNEL WALL TO BE USED FOR
WIRE ACCESS.

S

TUD EDGE

NAILING FLANGE

2

O

UTLET TUNNEL

T

YPICAL WOOD

OR STEEL STUD

TOP VIEW

R

ECOMMENDED (4) FASTENERS
4D NAIL OR DRYWALL SCREW
(NOT PROVIDED)

ROUTE WIRES UP STUD LENGTH TO SELECTED HEIGHT. COIL AND SECURE WIRES AS SHOWN.
PLACE THE LOW VOLTAGE OUTLET HOUSING OVER COILED WIRES. MAKE SURE OUTLET
TUNNEL IS BUTTED AGAINST STUD EDGE AND NO WIRES ARE PINCHED BETWEEN STUD AND
NAILING FLANGE. SECURE HOUSING WITH EITHER SCREWS OR NAILS.

L

NOTE: MUST INSERT SCREWS/NAILS ON BOTH SIDES OF
THE OUTLET TUNNEL TO BE SURE DRYWALL BULGES IF
HOLES ARE NOT CUT BY DRYWALL INSTALLER

TYPICAL WOOD
OR STEEL STUD

3

LEAVE APPROXIMATELY 1 INCH OF
WIRE EXPOSED AS SHOWN

INLET TUNNEL

INLET TUNNEL

INLET TUNNEL

3 1/2 in.

(89mm)

1 13/16 in.

(46mm)
1 1/8 in.
(29mm)

3/8 in.

(10mm)

9/16 in.
(14mm)

2 7/8 in.

(73mm)

N

DRY WALL

OR SHEETING

TYPICAL WOOD
OR STEEL STUD

TOP VIEW

4

All specifications and information shown were current as of publication, and are subject to change without notice.

INSTALLATION OF STI-9745 LOW VOLTAGE SPLICE BOX

Electronic warranty form at www.sti-usa.com/wc14

PRODUCT DIMENSIONS

9745 MAY2006