STI 9115 User Manual

Safety Technology International, Inc.

2

306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-88 8-4784 • E-mai l: info @sti-us a.com
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

U

nit 49G Pipers Road • Park Farm Industrial Estate • Redditch

W

orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

EXISTING THERMOSTAT WITH
D

ECORATIVE BEZEL

COVER

19049 WASHER (6) PROVIDED

19038 SPANNER BIT
(1) PROVIDED

19036 TAMPERPROOF SPANNER
HEAD SCREW #8 x 1 1/2 in.
(6) PROVIDED

19018 ANCHOR

(6) PROVIDED

EXISTING THERMOSTAT WITH
DECORATIVE BEZEL

9.37

i

n

.(238m

m

)

2

.

8

7

in.

(

7

3

m

m

)

7

.37 in. (187mm)

INSTALLATION INSTRUCTIONS

1. Center protective cover over thermostat.

2. Using protective cover as template, mark and drill
(6) 3/16 in. (4.7mm) diameter holes as shown.

3. Install the tamperproof fasteners using the supplied
spanner bit.

PRODUCT DIMENSIONS

CLEANING INSTRUCTIONS:

To clean cover, remove from wall. Rinse with water to remove abrasive dust
and dirt. Wash with soap or mild detergent using a soft cloth (DO NOT
SCRUB). Rinse once more, then dry with a soft cloth or chamois. To remove
grease or wet paint, rub gently with a cloth wetted thoroughly with
naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES.

All specifications and information shown were current as of publication, and are subject to change without notice.

INSTALLATION OF STI-9115 TAMPERPROOF THERMOSTAT COVER

Electronic warranty form at www.sti-usa.com/wc14

9115 APRIL2009