STI 9110 User Manual

Safety Technology International, Inc.

2306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
T

oll Free: 800-888-4784 • E-mail: [e-mail]

W

eb: www.sti-usa.com

S

afety Technology International (Europe) Ltd.

U

nit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E

-mail: [e-mail] • Web: www.sti-europe.com

COVER AND

LOCK ASSEMBLY

STI-9110 (CLEAR)

STI-9110-S (SMOKE)

9110 FRAME

DRILL (4) HOLES .25"

EXISTING FLUSH
M

OUNT THERMOSTAT

(6.3 mm) DIAMETER

FLUSH MOUNT

(STI 9110)

THE THREE (3) COVER TABS
M

UST FACE UPWARD AS SHOWN

A

➔

SEE VIEW A

19013 SCREW
#10 x 1/2 PHILIPS PAN HEAD
(4) PROVIDED

19033 ANCHOR

(4) PROVIDED

5.3 in.

(135mm)

8.45 in.

(215mm)

9.5 in.

(

241mm)

7.6 in.

(193mm)

3.75 in.

(95mm)

3

.9 in.

(99mm)

PHILIPS PAN HEA

FOR SURFACE MOUNT

STI-9110 AND STI-3100

FOR ADEQUATE CLEARANCE
A

2 in. (50mm) DEEP SPACER
MUST BE USED
(ORDER STI-3100)

A

VIEW A

91101 COVER

9110 FRAME

FRAME TABS

INSTALLATION OF STI-9110 & STI-9110-S LOCKABLE THERMOSTAT COVER

All specifications and information shown were current as of publication, and are subject to change without notice.

INSTALLATION INSTRUCTIONS

1. Do not remove thermostat. Prior to drilling anchor holes, cover thermostat with a damp cloth
to prevent dust from penetrating the sensor.

2. Center frame over existing thermostat. Mark and drill (4) anchor holes using a 1/4 in.
(6.3mm) drill bit. Insert the (4) anchors and complete installation as shown.

NOTE: The (3) tabs on the frame must face upward (View A).

3. Insert the (3) slots on the cover over tabs on the top surface of frame. Rotate cover downward
onto the frame and turn key to lock.

CLEANING INSTRUCTIONS

To clean cover, remove from wall. Rinse with water to remove abrasive dust and dirt. Wash with
soap or mild detergent using a soft cloth (DO NOT SCRUB). Rinse once more, then dry with a soft
cloth or chamois. To remove grease or wet paint, rub gently with a cloth wetted thoroughly with
naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES.

Electronic warranty form at www.sti-usa.com/wc14

9110 AUG2008