STI 7511 User Manual

Safety Technology International, Inc.

2306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com

19033 ANCHOR
(4) PROVIDED

6297T EXTERNAL MOUNTING TABS
(PROVIDED ON A, B, C & F MODELS)

07522 LID AND
FRAME ASSEMBLY

19001 SOCKET HEAD
SCREW #8-32 x 3/8 in.
(4) PROVIDED

STI-7510A WITH KEY LOCK

STI-7511A WITH THUMB LOCK

SEALED BACKBOX WITH EXTERNAL MOUNTING

MOUNTING TABS
AND FASTENERS

KEY LOCK SHOWN

4.59 in.(116mm)
DEPTH

Safety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch

Worcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

STI-7510B WITH KEY LOCK

STI-7511B WITH THUMB LOCK

SEALED BACKBOX WITH EXTERNAL MOUNTING

AND MOLDED DOUBLE GANG OUTLET BOX

IF CONDUIT HUB IS

NEEDED ORDER

SUB- 6297B20 HUB

KIT, GASKET AND

FASTENERS INCLUDED

NOTE: SUB KIT IS 3/4 in.

RIGID DIE CAST

THUMB LOCK SHOWN

1.74 in.(44mm)
DEPTH

MOUNTING TABS
AND FASTENERS

19013 SCREW

#10 x 1 1/2 in.

(4) PROVIDED

INSTALLATION INSTRUCTIONS

629761 GASKET

LID ASSEMBLY

TO BACKBOX

(ALL MODELS)

6297221 GASKET
LID TO FRAME
(ALL MODELS)

1. Insert the (4) mounting tabs into the back box slots with A, B, C, and
F models.

2. Using the installed mounting tab holes or internal mounting bosses
as a template, mark and drill (4) 1/4 in. diameter holes and complete
installation as shown.

CLEANING INSTRUCTIONS

Rinse with water to remove
abrasive dust and dirt. Wash with
soap or mild detergent, using a
soft cloth. (Do not scrub or use
brushes or abrasives.) Rinse
once more, then dry using a soft
cloth or chamois.

Electronic warranty form at www.sti-usa.com/wc14

To remove grease or wet paint,
rub gently with a cloth wetted
thoroughly with naptha (do not
use razor blades or gasoline).
Then wash and rinse.

IF CONDUIT HUB IS

SUB-6297B20 HUB

KIT, GASKET AND

FASTENERS INCLUDED

NOTE: SUB KIT IS

3/4 in. RIGID DIE CAST

6297316 GASKET

STI-7510C WITH KEY LOCK

STI-7511C WITH THUMB LOCK

OPEN BACKBOX WITH EXTERNAL MOUNTING

STI-3002 GASKET

NEEDED ORDER

STI-7510E WITH KEY LOCK

STI-7511E WITH THUMB LOCK

OPEN BACKBOX WITH INTERNAL MOUNTING

THUMB LOCK SHOWN

MOUNTING
FASTENERS

2.20 in.(56mm)
DEPTH

KEY LOCK SHOWN

2.95 in.(75mm)
DEPTH

MOUNTING TABS &
FASTENERS

STI-7511D WITH THUMB LOCK

OPEN BACKBOX WITH INTERNAL MOUNTING

6297316 GASKET

SURFACE MOUNT

CONDUIT INSERTS USE

WHERE NEEDED

(1 OF EACH PROVIDED)

SEALED BACKBOX WITH EXTERNAL MOUNTING

IF CONDUIT HUB IS

NEEDED ORDER

SUB-6297B20 HUB

KIT, GASKET AND
FASTENERS INCLUDED
NOTE: SUB KIT IS 3/4

STI-7510D WITH KEY LOCK

STI-7510F WITH KEY LOCK

STI-7511 WITH THUMB LOCK

KEY LOCK SHOWN

MOUNTING
FASTENERS

3.98 in.(101mm)
DEPTH

KEY LOCK SHOWN

2.79 in.(71mm)
DEPTH

MOUNTING TABS
AND FASTENERS

INSTALLATION OF STI-7510 & STI-7511 POLYCARBONATE ENCLOSURES

All specifications and information shown were current as of publication, and are subject to change without notice.

7510/11IS DEC2009