STI 7505 User Manual

Safety Technology International, Inc.

2

306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-88 8-4784 • E-mai l: info @sti-us a.com
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

U

nit 49G Pipers Road • Park Farm Industrial Estate • Redditch

W

orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

7

50098 GASKET
CENTER GASKET AROUND EXISTING KEYPAD
M

ARK AND DRILL (6) 3/16 in.(4.7mm) DIAMETER

HOLES 7/8 in.(22mm) DEEP

STI-7504 ENCLOSURE (CLEAR)
STI-7505 ENCLOSURE (SMOKE)

REMOVE BACKING

PAPER AND APPLY

TOWARD MOUNTING

SURFACE.

AFTER INSTALLATION IS

COMPLETE THIS AREA

OF GASKET MAY BE

CUT AND REMOVED

EXISTING KEYPAD UNIT

19014 SCREW #8 x 1 in.

(6) PROVIDED

19018 ANCHOR

(6) PROVIDED

4 in.

(101mm)

TOP

VIEW

5.5 in.

(139mm)

FRONT VIEW

4

.75 in.

(

120mm)

8

.75 in.

(222mm)

6.75 in.

(

171mm)

INSTALLATION INSTRUCTIONS

1. Place the cover over the appliance. Be sure that it

2. Mark and drill 7 holes 3/16 in. (4.7mm).

3. Complete assembly as shown.

is accessible through the front opening in cover.

All specifications and information shown were current as of publication, and are subject to change without notice.

INSTALLATION OF SNOOPER STOPPERS® STI-7504 AND STI-7505

CLEANING INSTRUCTIONS

1. Rinse cover with water to remove abrasive dust and dirt.

2. Wash with soap or mild detergent using a soft cloth. (DO NOT SCRUB.)

3. Rinse once more, then dry with a soft cloth or chamois.

4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly
with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)

Electronic warranty form at www.sti-usa.com/wc14

STI-750405IS AUG2006