STI 6720 User Manual

Safety Technology International, Inc.

2

306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-88 8-4784 • E-mai l: info @sti-us a.com
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

U

nit 49G Pipers Road • Park Farm Industrial Estate • Redditch

W

orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

INSTALLATION INSTRUCTIONS

19018 ANCHOR (2) PROVIDED

M

OUNTING BASE

FACEPLATE

SUB-672 REPLACEMENT GLASS

19014 SCREW
# 8 x 1 in. (2) PROVIDED

4.37 in.(111mm) DIA.

4.12 in.(104mm)

1.25 in.(32mm)

TABS

STEP BOSS

T

1. Position unit on any suitable mounting surface with key hook facing
upward. Mark the (2) mounting holes.

2. Drill (2) 3/16 in. diameter holes 1 in.(25mm) deep.

3. Place anchors in holes and install screws.

4. Place key on hook.

5. Snap faceplate onto mounting base, it can not be opened without
breaking the glass.

VIEW 1

PRODUCT DIMENSIONS

GLASS REPLACEMENT INSTRUCTIONS

1. After breakage occurs carefully remove any remaining
glass. Reach thru faceplate opening and depress glass
retention tabs and remove face plate (view 1).

2. Insert replacement glass in face plate making sure glass
is between front of housing and step boss (view 2).

2. Replace protected key and then snap faceplate onto
mounting base.

Electronic warranty form at www.sti-usa.com/wc14

INSTALLATION OF STI-6720 BREAK GLASS STOPPER

All specifications and information shown were current as of publication, and are subject to change without notice.

®

VIEW 2

6720IS JULY2006