STI 6510 User Manual

Safety Technology International, Inc.

2306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com

Safety Technology International (Europe) Ltd.

Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com

CENTER COVER AND FRAME ASSY.

AROUND PULL STATION.

MARK AND DRILL (4) HOLES

.25 in. (6.3mm) DIA.

19033 ANCHOR

(4) PROVIDED

OPTIONAL: RECOMMEND THE
USE OF STI-6581 BACKPLATE

TO INSURE PROPER SEALING

3.25 in.

(83mm)

OPTIONAL

EXISTING PULL

STATION

STI-6531 SPACER (CLEAR)

STI-6531-R (RED)

STI-6531-Y (YELLOW)

STI-6531-B (BLUE)

STI-6531-G (GREEN)

STI-6004 GASKET
(INNER DIA. USED ON 1/2 in.)
(OUTER DIA. USED ON 3/4 in.)
NOTE: USE WITH STI-6535

SPACER INSERT
(2) PROVIDED
ALLOWS FOR
INSTALLATION WITH
OR WITHOUT
ELECTRICAL CONDUIT.
NOTE: NOT TO BE USED
WITH STI-6535.

FIRE

PULL

ALARM

DOWN

TYPICAL SURFACE MOUNT INSTALLATION

STI-6501 GASKET.
STI-6525 (1) PROVIDED
STI-6535 (2) PROVIDED
INSTALL WITH ADHESIVE
BACKING FACING WALL

A

03006 FRAME GASKET
INSTALL WITH ADHESIVE
BACKING FACING TOP OF FRAME

STI-6600 HORN MODEL WITHOUT SPACER
STI-6605 HORN MODEL WITH SPACER
STI-6525 WEATHER MODEL WITHOUT HORN
OR SPACER, WITH GASKET
STI-6535 WEATHER MODEL WITHOUT HORN,
WITH SPACER AND GASKETS
STI-6540 WITHOUT HORN WITHOUT SPACER
STI-6545 WITHOUT HORN, WITH SPACER
STI-6500 CLEAR COVER, NO HORN HOUSING
STI-6505 CLEAR COVER, NO HORN HOUSING,
WITH SPACER

EA135 HORN
DEACTIVATION PIN
NOTE: FOR NORMAL
OPERATION, TO ARM HORN,
REMOVE PIN.
ALARM WILL SOUND,
SHUT COVER.

MODELS WITH NO SPACER
(4) 19013 #10 x 1.5 in.
PHILIPS PAN HEAD

MODELS WITH SPACER
(4) 19026 #10 x 3.5 in.
PHILIPS PAN HEAD

4.75 in.(121mm)

HORN

HOUSING

SPACER

5 in.(127mm)

FRAME

5.5 in.(139mm)

2.25 in.

(57mm)

2 in.(51mm)

ALL HORN MODELS SIDE VIEW

6 in.(152mm)

FRAME

5.5 in.(139mm)

SPACER

ALL MODELS WITHOUT HORN SIDE VIEW

FRAME

4.12 in.

(104mm)

SPACER

ALL MODELS END VIEW
PRODUCT DIMENSIONS

ALARM

FIRE

6.23 in.

(158mm)

PULL

DOWN

TYPICAL FLUSH MOUNT INSTALLATION

REMOVE ADHESIVE BACKING PAPER GASKET
NOT FOR USE WITH UNITS CONTAINING HORN

TO INSTALL, DRILL
23/64” HOLE IN

ENTER

COVER ONLY. INSTALL
BLOCK FROM BACK
SIDE OF FRAME.

SUB-65
BREAKABLE SEAL
(5) PROVIDED

19031 FRAME LOCK

LIFT HERE

VIEW IN DIRECTION OF ARROW A

OPTIONAL: STOPPER SEAL STI-6515

VOLUME SELECTOR SWITCH

DETAIL B

TO ACCESS

BATTERY REMOVE

(2) SCREWS

AND LIFT

HOUSING LID

USING TAB

B

BATTERY - 9 VOLT

PROVIDED

EA135 HORN

SERVICE PIN

VIEW SHOWING BATTERY REPLACEMENT

RETIRER LE PAPIER DORSAL DE L’ADHÉSIF
NE PAS UTILISER LE JOINT AVEC LES UNITÉS INTÉGRANT UNE ALARME SONORE

Electronic warranty form at www.sti-usa.com/wc14

INSTALLATION OF STI MINI STOPPER® SERIES

All specifications and information shown were current as of publication and are subject to change without notice.

LID NOTCH

TAB

HOUSING
TAB

REPLACING HOUSING LID

• PLACE NOTCH OF LID UNDER
HOUSING TAB

• ROTATE LID INTO POSITION

• REPLACE SCREWS

ALIGN BATTERY TERMINALS,
PUSH IN TERMINALS AND
ROTATE INTO POSITION.

BE SURE BATTERY TERMINALS
ARE FULLY ENGAGED.

6600IS FEB2009