STI 102721 User Manual
6518 Isometric.eps
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
102721 OPTIONAL
USE ADAPTER PLATE
WHEN ELECTRICAL BOX
IS SURFACE MOUNTED
GASKET (INCLUDED)
10283 COVER ASSY.
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
OFFSET FACING REARWARD
AS SHOWN
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
6518 Isometric.eps
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
REMOVE ADHESIVE
BACKING PAPER
CENTER LINE
OF SPACER
UP
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
ADHESIVE BACK GASKET
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
6518 Isometric.eps
5 in.
(127mm)
6.5 in.
(165mm)
ADHESIVE BACK GASKET
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
6518 Isometric.eps
ADHESIVE BACK GASKET
COVER ASSEMBLY
BACKPLATE FOR SURFACE
MOUNT APPLICATIONS ONLY
6518 Isometric.eps
1.75 in.
(44mm)
3.25 in.
(82.5mm)
TOP VIEW
STI-6518
SIDE VIEW
STI-6518
5 in.
(127mm)
6.5 in.
(165mm)
Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: info@sti-usa.com
Web: www.sti-usa.com
EXISTING SINGLE
GANG OUTLET BOX
(NOT FURNISHED)
NOTE
GASKET (INCLUDED)
REMOVE ADHESIVE
BACKING PAPER
PLACE BOPPER STOPPER
HOLES 1 1/8 in. DEEP.
When installing cover, over appliance,
leave 1/4 in. clearance between top
surface and hinge to allow proper
clearance when cover is lifted.
If weather protection is not required,
discard gasket and spacer, they are
not needed.
ADA
Compliant
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: info@sti-europe.com • Web: www.sti-europe.com
OFFSET FACING REARWARD
AS SHOWN
1 in. (25mm)
OVER APPLICANCE.
MARK AND DRILL
(3) 3/16 in. DIA.
102721 (OPTIONAL) USE ADAPTER PLATE
WHEN ELECTRICAL BOX IS SURFACE MOUNTED
1015980 SPACER FOR USE WITH GASKET (INCLUDED)
10283 COVER ASSY.
19018 ANCHOR
(3) PROVIDED
1015980 SPACER
TYPICAL SURFACE MOUNT INSTALLATION
19054 #6-32 x 1/2 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITH GASKET)
19053 #6-32 x 3/8 in.
PHIL. PAN HEAD SCREWS
(3) PROVIDED
(USE WITHOUT GASKET)
TYPICAL FLUSH MOUNT INSTALLATION
EXISTING STOPPER STATION
INSTALL AFTER COVER ASSY. AND
SPACER HAVE BEEN SECURELY FASTENED.
TOP EDGE OF GASKET MUST BUTT AGAINST
BOTTOM OF SPACER AS SHOWN.
101598 GASKET
REMOVE ADHESIVE
BAKING PAPER
10283 COVER ASSY.
19039 #6 x 1 1/4 in.
PHIL. PAN HEAD SS SCREWS
(3) PROVIDED
Electronic warranty form at www.sti-usa.com/wc14
INSTALLATION OF STI-6518 BOPPER STOPPER
All specifications and information shown were current as of publication and are subject to change without notice.
®
1.75 in.
(44mm)
PRODUCT DIMENSIONS
(INSIDE DIMENSIONS)
MAKE SURE SPACER IS
INSTALLED AS SHOWN WITH
MOUNTING HOLES BELOW CENTER LINE.
SPACER ORIENTATION
6518IS OCT2006
(82.5mm)
TOP VIEW
STI-6518
5 in.
(127mm)
SIDE VIEW
STI-6518
UP
1015980
3.25 in.
6.5 in.
(165mm)
CENTER LINE
OF SPACER
Loading...