S25 T Treadmill
Customer Support Services
Service manual
< 2 >
General
General
General
General Contents
Contents
Contents
Contents
1. Introduction
2. Component identification
3. Parts manual
4. Assembly instructions
Sectional
Sectional
Sectional
Sectional Contents
Contents
Contents
Contents
< 3 >
1.
1.
1.
1. Introduction
Introduction
Introduction
Introduction
Please check following special note before installation
1.
1.
1.
1. Assembly
Assembly
Assembly
Assembly introduction
introduction
introduction
introduction
Important safety installation of the STEX treadmills.
� Please confirm the horizontal floor.
Position the treadmill on a clear, level surface. Otherwise Not only Vibration will be occurred but also
User would
be wounded.
We strongly recommended laying a mat under the treadmill to prevent damage against the shock of vibr
ation
� DO
DO
DO
DO NOT
NOT
NOT
NOT locate the treadmill in areas with a high humidity and a lot of dust.
�
DO
DO
DO
DO NOT
NOT
NOT
NOT locate any inflammable liquid of material near the treadmill .
� Locate the treadmill with the enough intervals to operate easily and safely.
- Minimum space : Rear 1.2m, Left & Right 0.6m
2.
2.
2.
2. How
How
How
How to
to
to
to carry
carry
carry
carry the
the
the
the STEX
STEX
STEX
STEX Treadmill
Treadmill
Treadmill
Treadmill
To carry the STEX Treadmill
� Lift the rear of the treadmill for the easy movement.
3.
3.
3.
3. Parts
Parts
Parts
Parts included
included
included
included
� Operation Manual, Warranty Card
�
10mm T-Wrench, 6mm T-Wrench, 6mm L-Wrench
� Hexagon socket head(M8×20mm-SEMS)
×
14ea(Silver)
Hexagon socket head(M8 × 50mm-SEMS) × 4ea(Black)
� Main Frame
Display Console Assembly
Display Top Assembly
Display Support 1set
4.
4.
4.
4. If
If
If
If you
you
you
you have
have
have
have any
any
any
any problem
problem
problem
problem
If you have any problem for STEX treadmill S25T series, Please contact our sales dealer or our service ce
nter by
< 4 >
phone of E-mail. In order to reply promptly as for your particular issue situation, Please refer to the sampl
e of Claim
Report in the last page. It would be appreciated if you fill out the form like the sample. Then we will pro
ceed your
claim quickly.
3.
3.
3.
3. Part
Part
Part
Part manual
manual
manual
manual
3-1 Total assembly - S25T, S25TX
3-1 Description
No Parts
Parts No.
Q ’ TY Remark
S25T S25TX
1 Master main frame
21MF-TSN01 21MF-TSX01
1 ea
2 Master display
21DC-TSN01 21DC-TSX01
1 ea
< 5 >
3 Display support(LH/RH) 32M4-AL313/23 1 set
4 Hexagon socket head 33W1-1N820 14 ea M8 x 20 L (SEMS)
3-2 Assembly Main Frame (#1)
3-2 Description
No Parts
Parts No.
Q ’ TY Remark
S25T S25TX
1 1 ’ st main frame assembly
21MF-TSA0 1 21MF-TSC01
1 ea
2 Front motor cover 32M3-TS011 1 ea
3 Top motor cover 32M3-TS021 1 ea
4 Side motor cover-LH(RH) 32M3-TS031(41) 1 set
5 Safety guide 32M3-TS061 1 ea
6 Back cap 32M3-TS051 1 set
7 Side platform 32M4-AL101 2 ea
8 Frame side cover_LH(RH) 32M4-AL212/22 1 set
9 Non slip pad 32M3-RS201 2 ea
10 Platform fixer plate 02 32M1-TSE21 8 ea
< 6 >
11 Hexagon socket head 33W1-1B820 16 ea M8 x 20 L (SEMS),⑧,
⑩
12 Hexagon socket head 33W1-1B820 4 ea M8 x 20 L (SEMS), ② , ⑥
13 Tapping truss head 33U6-6Z512 4 ea Φ 5 x 12 L , ④
14 Machine pan head 33T6-1B512 4 ea M5 x 12 L , ③
3-3-1 Assembly Main Frame (#2) – S25T
< 7 >
3-3-1 Description
No Parts
Parts No. Q ’ TY Remark
1 2 ’ nd main frame assembly 21MF-TSB01 1 ea
2 Incline motor 33S1-IS021 1 ea
3 Incline front fix shaft 32M2-T80W1 1 ea
4 Split pin 33N5-P0540 1 ea
5 Incline bushing 32M2-TS401 1 ea
6 Hexagon head 33T1-4BA45 1 ea M10 x 45 L
7 Lock nut 33N1-L1000 1 ea M10
8 Deck 32M2-TS501 1 ea
9 Running belt 32N3-RS101 1 ea
10 Guide finger(LH/RH) 32M1-TSN11/21 1 set
11 Deck washer 32M2-T8031 4 ea
12 Socket flat head 33W3-2B830 4 ea M8 x 30 L
13 Rear roller assembly 21RR-TW001 1 ea
14 Front roller assembly 21FR-TW001 1 ea
15 V-belt 33N3-V0300 1 ea
16 Hexagon socket head 33W1-1B835 2 ea M8 x 35 L (SEMS)
17 Hexagon socket head 33W1-2BBC0 2 ea M12 x 120 L
18 Washer-split lock 33N1-P1200 2 ea Φ 12
19 Washer-flat 33N1-F1200 2 ea Φ 12
20 Driving motor assembly 21DM-TW003 1 ea
21 Motor insulation bush 32M2-TS601 4 ea
22 Hexagon socket head 33W1-1B820 4 ea M8 x 20 L (SEMS)
23 Motor limit bush 32M2-TS701 2 ea
24 Auto tensioner assembly 21AT-TSO01 1 ea
25 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
26 Inverter-TM5(G100) 33S2-IS201 1 ea
27 Noise filter 33S2-F0002 1 ea
28 Breaking resister 33S2-R0002 1 ea
29 Machine pan head 33T6-1B512 8 ea
< 8 >
30 Front terminal assembly 21FT-TSP01 1 ea
31 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
32 Partition assembly 21PA-TSQ01 1 ea
33 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
3-3-2 Assembly Main Frame (#2) – S25TX
< 9 >
3-3-2 Description
No Parts
Parts No. Q ’ TY Remark
1 2 ’ nd main frame assembly 21MF-TSB01 1 ea
2 Incline motor 33S1-IS021 1 ea
3 Incline front fix shaft 32M2-T80W1 1 ea
4 Split pin 33N5-P0540 1 ea
5 Incline bushing 32M2-TS401 1 ea
6 Hexagon head 33T1-4BA45 1 ea M10 x 45 L
7 Lock nut 33N1-L1000 1 ea M10
8 Deck 32M2-TS501 1 ea
9 Running belt 32N3-RS101 1 ea
10 Guide finger(LH/RH) 32M1-TSN11/21 1 set
11 Deck washer 32M2-T8031 4 ea
12 Socket flat head 33W3-2B830 4 ea M8 x 30 L
13 Rear roller assembly 21RR-TW001 1 ea
14 Front roller assembly 21FR-TW001 1 ea
15 V-belt 33N3-V0300 1 ea
16 Hexagon socket head 33W1-1B835 2 ea M8 x 35 L (SEMS)
17 Hexagon socket head 33W1-2BBC0 2 ea M12 x 120 L
18 Washer-split lock 33N1-P1200 2 ea Φ 12
19 Washer-flat 33N1-F1200 2 ea Φ 12
20 Driving motor assembly 21DM-TW003 1 ea
21 Motor insulation bush 32M2-TS601 4 ea
22 Hexagon socket head 33W1-1B820 4 ea M8 x 20 L (SEMS)
23 Motor limit bush 32M2-TS701 2 ea
24 Auto tensioner assembly 21AT-TSO01 1 ea
25 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
26 Inverter-TM5(G100) 33S2-IS201 1 ea
27 Noise filter 33S2-F0002 1 ea
28 Breaking resister 33S2-R0002 1 ea
29 Machine pan head 33T6-1B512 8 ea
30 Front terminal assembly 21FT-TSP01 1 ea
31 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
< 10 >
32 Partition assembly 21PA-TSQ01 1 ea
33 Hexagon socket head 33W1-1B820 2 ea M8 x 20 L (SEMS)
34 Adapter bracket 33M1-TSR01 1 ea
35 Adapter fix bracket 32M1-TWT11 1 ea
36 Adapter 3B802P005 1 ea
3-4 Assembly Auto Tensioner (#3)
3-4 Description
No Parts
Parts No. Q ’ TY Remark
1 Tensioner bracket 01 32M1-TS011 1 ea
2 Tensioner bracket 02 32M1-T8182 1 ea
3 Tensioner bracket 03 32M1-T8171 1 ea
4 Tensioner hinge shaft 32M2-T80K1 1 ea
5 Tensioner hinge bushing 32M2-T80L1 2 ea
6 Hexagon socket head 33W1-1B855 1 ea M8 x 5 5 L (SEMS)
7 Nut-nylon insert lock 33N1-L0800 1 ea M8
8 Tensioner roller shaft 32M2-TS801 2 ea Φ 12
9 Tensioner roller 32M2-TS901 1 ea
< 11 >
10 Snap ring - C type 33N1-H4200 1 ea Φ 42
11 Ball bearing 33N2-Z6004 2 ea #6004ZZ
12 Hexagon socket head 33W1-1B855 1 ea M8 x 5 5 L (SEMS)
13 Nut-nylon insert lock 33N1-L0800 1 ea M8
14 Tensioner spring 32M2-T80T1 1 ea
15 Hexagon socket head 33W1-1B815 2 ea M8 x 1 5 L (SEMS)
3-5 Assembly Rear Roller (#4)
3-5 Description
No Parts
Parts No. Q ’ TY Remark
1 Rear roller pipe 32M2-TW401 1 ea
2 Rear roller shaft 32M2-TW701 1 ea
3 Ball bearing 33N2-D6305 2 ea #6305DD
4 Snap ring - C type 33N1-S2500 2 ea Φ 25
5 Snap ring - C type 33N1-R6200 2 ea Φ 62
< 12 >
3-6 Assembly Front Roller (#5)
3-6 Description
No Parts
Parts No. Q ’ TY Remark
1 Front roller pipe 32M2-TW801 1 ea
2 Front roller shaft 32M2-TWB01 1 ea
3 Ball bearing 33N2-D6305 2 ea #6305DD
4 Snap ring - C type 33N1-S2500 2 ea Φ 25
5 Snap ring - C type 33N1-R6200 2 ea Φ 62
< 13 >
3-7 Assembly Partition (#6)
3-7 Description
No Parts
Parts No. Q ’ TY Remark
1 Partition plate 32M1-TSQ11 1 ea
2 Antistatic 32M2-T80P1 1 ea
3 Machine pan head 33T6-1B510 3 ea M5x10L(SEMS)
< 14 >
3-8 Assembly Main Frame (#7)
3-8 Description
No Parts
Parts No. Q ’ TY Remark
1 Main frame assembly 32M1-TS005 1 ea
2 Incline leg assembly 32M1-TSL03 1 ea
3 Front wheel for S25T 33N5-M0160 2 ea
4 Hexagon socket head 33W1-1B815 2 ea M8 x 15 L (SEMS)
5 Oil less bearing for S25T 32N2-O2040 2 ea
6 Leg washer 32M1-T80V1 2 ea
7 Bearing shaft for S25T 32M2-TSL20 2 ea
8 Washer-split lock 33N1-P1200 2 ea Φ 12
< 15 >
9 Hexagon socket head 33W1-4BB70 2 ea M12 x 70 L (CM)
10 Leveling foot 33N5-MRS01 2 ea
11 Silicon absorber 32M3-T80D2 4 ea
12 Rubber absorber 32M3-T80C1 2 ea
13 Hexagon socket head 33W1-1B815 6 ea M8 x 15 L (SEMS)
14 Tracking bush 32M2-TS301 2 ea
3-9 Assembly Display Frame (#1)
3-9 Description
No Parts
Parts No.
Q ’ TY Remark
S25T S25TX
1 Display console assembly 21DC-TSA01 1 ea
2 Display top assembly
21DC-TSB01 21DC-TS C 01
1 ea
3 Hexagon socket head 33W1-1B850 4 ea M8 x 50 L (SEMS)
< 16 >
3-10 Assembly Display Frame (#2)
3-10 Description
No Parts
Parts No. Q ’ TY Remark
1 1 ’ st Display console assembly 21DC-TSA11 1 ea
2 Bottom case assembly 21DC-TSB11 1 ea
3 Tapping pan head 33U5-6B516 10 ea Φ 5 x 16 L
4 Machine pan head 33T6-1B512 2 ea M5 x 12 L (SEMS)
< 17 >
3-11 Assembly Display Frame (#3)
3-11 Description
No Parts
Parts No. Q ’ TY Remark
1 Display bottom case 32M3-TS141 1 ea
2 COMM board 22BD-TS15D 1 ea
3 COMM fix bracket 32M1-TSV01 1 ea Φ 5 x 16 L
4 Machine pan head 33T6-1B408 2 ea M 4 x 8L (SEMS)
5 Tapping truss head 33U6-6Z512 2 ea Φ 5 x 12L
< 18 >
3-12 Assembly Display Frame (#4)
3-12 Description
No Parts
Parts No. Q ’ TY Remark
1 Console assembly 21DC-TSA31 1 ea
2 Middle case assembly 21DC-STA41 1 ea
5 Tapping truss head 33U6-6Z512 10 ea M5 x 12 L (SEMS)
< 19 >
3-13 Assembly Display Frame (#5)
3-13 Description
No Parts
Parts No. Q ’ TY Remark
1 Display middle case 32M3-TS131 1 ea
2 Emergency switch 32M3-TS161 1 ea
3 Emergency fix bracket 32M3-TS151 1 ea
4 Micro switch 33H1-TS011 1 ea
5 Tapping truss head 33U6-6Z520 2 ea Φ 5 x 20L
6 Tapping truss head 33U6-6Z516 1 ea Φ 5 x 16 L
7 Multi board bracket 323M-TS171 1 ea
8 IPOD cable 32Q1-TS1M1 1 ea
9 Front board 22BD-TS14A 1 ea
< 20 >
10 Multi fixer plate 32M1-TSAU1 1 ea
11 Machine pan head 33T6-1B408 4 ea M 4 x 8L (SEMS)
12 Fast track board 22BD-TS13A 1 ea
13 Tapping truss head 33U6-6B410 2 ea Φ 4 x 10L
14 Membrane switch(fast track) 32P5-TS021 1 ea
15 Emergency wire 32Q1-TSEW1 1 ea
3-14 Assembly Display Frame (#6)
3-14 Description
No Parts
Parts No. Q ’ TY Remark
1 Display main frame 32M1-TS0A3 1 ea
2 Heart rate bar assembly 21HR-TS0B1 1 set
3 Hexagon socket head 33W1-1B620 8 ea M6 x 20 L (SEMS)
4 Side handle _ LH(RH) 32M3-TSAQ1(R1) 1 set
5 Interface board 22BD-TS12D 1 ea
6 Machine pan head 33T2-1B410 2 ea M4 x 10 L (SEMS)
< 21 >
3-15 Assembly Display Frame (#7)
3-15 Description
No Parts
Parts No. Q ’ TY Remark
1 Heart rate pipe assembly 32M1-TSA21 1 ea
2 Heart rate rubber 32M3-TST31 1 ea
3 Heart rate mold top 32M3-TS181 1 ea
4 Heart rate mold bottom 32M3-TS191 1 ea
5 Tapping pan head 33U5-6B410 2 ea Φ 4 x 10 L
6 HR sensor cell 32M1-TST31 2 ea
7 3M tape 32M1-TS3T1 2 ea
< 22 >
3-16-1 Assembly Display Frame – S25T (#8)
3-16-1 Description
No Parts
Parts No. Q ’ TY Remark
1 1 ’ st display top assembly 21DC-TSB11 1 ea
2 Display top bottom case 32M3-TS091 1 ea
3 Tapping pan head 33U5-6B516 4 ea Φ 5 x 16 L
4 Display top back cover 32M3-TS111 1 ea
5 Display top back upper cover 32M1-TSAD1 1 ea
6 Tapping pan head 33U5-6B516 4 ea Φ 5 x 16 L
< 23 >
3-16-2 Assembly Display Frame – S25TX (#8)
3-16-2 Description
No Parts
Parts No. Q ’ TY Remark
1 1 ’ st display top assembly 21DC-TSC11 1 ea
2 Display top bottom case 32M3-TS091 1 ea
3 Tapping pan head 33U5-6B516 4 ea Φ 5 x 16 L
4 Display top back cover 32M3-TS111 1 ea
5 Display top back upper cover 32M1-TSAD1 1 ea
6 Tapping pan head 33U5-6B516 4 ea Φ 5 x 16 L
< 24 >
3-17-1 Assembly Display Frame – S25T (#9)
3-17-1 Description
No Parts
Parts No. Q ’ TY Remark
1 Top assembly 32M1-TSX04 1 ea
2 Top front panel assembly 21DC-TSB21 1 ea
3 Machine pan head 33T6-1B512 6 ea M5 x 12 L (SEMS)
4 Display top middle case 32M3-TS081 1 ea
5 Tapping truss head 33U6-6Z512 4 ea Φ 5 x 12 L
< 25 >
3-17-2 Assembly Display Frame – S25TX (#9)
3-17-2 Description
No Parts
Parts No. Q ’ TY Remark
1 Top front panel assembly 21DC-TSC21 1 ea
2 Display top middle case 32M3-TS081 1 ea
3 Tapping truss head 33U6-6Z512 8 ea Φ 5 x 12 L
4 Top assembly 32M1-TSX01 1 ea
< 26 >
5 Machine pan head 33T6-1B512 4 ea M5 x 12 L (SEMS)
6 Tapping truss head 33U6-6Z512 4 ea Φ 5 x 12 L
3-18-1 Assembly Display Frame – S25T (#10)
3-18-1 Description
No Parts
Parts No. Q ’ TY Remark
1 Display top front panel (Basic) 32M3-TS071 1 ea
2 Display board 22BD-TS11C 1 ea
3 Panel fixer plate 32M1-TSY01 1 ea
4 Membrane overlay 32P5-TS011 1 ea
5 Tapping truss head 33U6-6Z412 5 ea Φ 4x12L
6 Tapping truss head 33U6-6Z512 8 ea Φ 5x12L
< 27 >
3-18-2 Assembly Display Frame – S25TX (#10)
3-18-2 Description
No Parts
Parts No. Q ’ TY Remark
1 Display top front panel (15 ” LCD) 32M3-TSX71 1 ea
2 15 ” LCD panel 33F3-L0151 1 ea
3 LCD guide panel (15 ” ) 32M2-TS0U1 1 ea
4 15 ” br acket 32M1-TSX32 1 ea
5 LCD back plate _ LH(RH) 32M1-TSXC1/D1 1 set
6 Inverter board 22BD-TS121 1 ea
< 28 >
7 Scaler board 22BD-TS111 1 ea
8 Tuner board 22BD-TS131 1 ea
9 Tapping truss head 33U6-6Z512 6 ea
10 Machine pan head 33T6-1B512 4 ea M5 x 12 L (SEMS)
11 Machine pan head 33T6-1Z308 13 ea M3 x 8 L
3-19-1 Main Circuit Diagram – S25T
3-19-1 Description
No Parts
Parts No. Q ’ TY Remark
1 Power cable 33S2-P0011 1 ea
2 Ferrite core (BNF-14) 32FC-TS011 1 ea
3 Circuit breaker 33S2-S0004 1 ea
4 Power N cable 33Q1-TS1F3 1 ea
5 Ferrite core (BNF-27) 32FC-TS021 1 ea
6 Noise filter 33S2-F0002 1 ea
7 S_TM5_Power cable 32Q1-TS1E2 1 ea
8 Inverter-TM5(G100) 33S2-IS201 1 ea
9 Break resistor cable 32Q1-TX0A1 1 ea
< 29 >
10 Break resistor 33S2-R0002 1 ea
11 TM5 Driving motor 32Q1-T81D1 1 ea
12 Driving motor assembly 21DM-TW003 1 ea
13 Incline motor 33S1-IS021 1 ea
14 Ferrite core (BNF-14) 32FC-TS011 1 ea
15 S_LAN cable 1.5 32Q1-TS1B3 1 ea
16 EXT. Input board 22BD-TS16D 1 ea Option
17 S_CSAFE cable _ L 32Q1-TS1A2 1 ea Option
3-19-2 Main Circuit Diagram – S25TX
< 30 >
3-19-2 Description
No Parts
Parts No. Q ’ TY Remark
1 Power cable 33S2-P0011 1 ea
2 Ferrite core (BNF-14) 32FC-TS011 1 ea
3 Circuit breaker 33S2-S0004 1 ea
4 Power L cable 33Q1-TS1G4 1 ea
5 Ferrite core (BNF-27) 32FC-TS021 1 ea
6 Noise filter 33S2-F0002 1 ea
7 S_TM5_Power cable 32Q1-TS1E2 1 ea
8 Inverter-TM5(G100) 33S2-IS201 1 ea
9 Break resistor cable 32Q1-TX0A1 1 ea
10 Break resistor 33S2-R0002 1 ea
11 TM5 Driving motor 32Q1-T81D1 1 ea
12 Driving motor assembly 21DM-TW003 1 ea
13 Incline motor 33S1-IS021 1 ea
14 Ferrite core (BNF-14) 32FC-TS011 1 ea
15 S_LAN cable 1.5 32Q1-TS1B3 1 ea
16 EXT. Input board 22BD-TS16D 1 ea Option
17 S_CSAFE cable _ L 32Q1-TS1A2 1 ea Option
18 HDMI cable 2m 33Q1-MS041 1 ea Option
19 HDMI F/F gender 33Q1-MS051 1 ea Option
20 Coaxial cable 32Q1-T8151 1 ea
21 Coaxial cable connection jack 33Q1-C0001 1 ea
22 Adapter (12V) 32Q1-T80P1 1 ea
< 31 >
3-20-1 Display Circuit Diagram – S25T
3-20-1 Description
No Parts
Parts No. Q ’ TY Remark
1 Interface board 22BD-TS12K 1 ea
2 S _ IPOD _ Comm cable 32Q1-TS153 1 ea
3 IPOD cable 32Q1-TS1M1 1 ea
4 Front board 22BD-TS14E 1 ea
5 S _ LAN cable 0.3 32Q1-TS1C3 1 ea
6 S _ CSAFE cable _ H 32Q1-TS192 1 ea Option
7 S _ Comm _ BD cable 32Q1-TS144 1 ea
8 Comm board 22BD-TS15D 1 ea
< 32 >
9 Fast track board 22BD-TS13B 1 ea
10 S _ Fast key cable 32Q1-TS164 1 ea
11 S _ HR Combi cable 32Q1-TS113 1 ea
12 S _ HR cable 32Q1-TS123 2 ea
13 Heart rate cell 32M1-TST31 4 ea
14 S _ Emergency cable 32Q1-TS133 1 ea
15 Emergency switch 32M3-TS161 1 ea
16 Fast track key 32P5-TS021 1 ea
3-20-2 Display Circuit Diagram – S25TX
< 33 >
3-20-2 Description
No Parts
Parts No. Q ’ TY Remark
1 Interface board 22BD-TS12K 1 ea
2 S _ IPOD _ Comm cable 32Q1-TS153 1 ea
3 IPOD cable 32Q1-TS1M1 1 ea
4 Front board 22BD-TS14E 1 ea
5 S _ LAN cable 0.3 32Q1-TS1C3 1 ea
6 S _ CSAFE cable _ H 32Q1-TS192 1 ea Option
7 S _ Comm _ BD cable 32Q1-TS144 1 ea
8 Comm board 22BD-TS15D 1 ea
9 Fast track board 22BD-TS13B 1 ea
10 S _ Fast key cable 32Q1-TS164 1 ea
11 S _ HR Combi cable 32Q1-TS113 1 ea
12 S _ HR cable 32Q1-TS123 2 ea
13 Heart rate cell 32M1-TST31 4 ea
14 S _ Emergency cable 32Q1-TS133 1 ea
15 Emergency switch 32M3-TS161 1 ea
16 Fast track key 32P5-TS021 1 ea
17 S _ Scaler _ USB cable 32Q1-TS1Q1 1 ea
18 Earphone cable 32Q1-T80R1 1 ea
19 S _ IPOD Output cable 32Q1-TS1H2 1 ea
20 HDMI cable 1m 33Q1-MS011 1 ea Option
21 S _ Antenna cable _ H 32Q1-TS1J2 1 ea
22 SCALER _ Power cable 32Q1-TS1S1 1 ea
< 34 >
3-21-1 Top Circuit Diagram – S25T
3-21-1 Description
No Parts
Parts No. Q ’ TY Remark
< 35 >
1 Display board 22BD-TS11E 1 ea
2 S _ Display data cable 32Q1-TS181 1 ea
3 S _ Display key cable 32Q1-TS171 1 ea
4 Membrane overlay 32P5-TS011 1 ea
3-21-2 Top Circuit Diagram – S25TX
3-21-2 Description
No Parts
Parts No. Q ’ TY Remark
1 LCD monitor 33F3-LS001 1 ea
< 36 >
2 Scaler board 33BD-TS121 1 ea
3 Inverter board 22BD-TS181 1 ea
4 S _ LCD _ Inverter cable _ B 32Q1-TS352 1 ea
5 S _ LVDS cable _B 32Q1-TS341 1 ea
6 S _ SCALER Comm cable 32Q1-TS1D2 1 ea
7 TV Key board 22BD-TS171 1 ea
8 S _ Display Key cable 32Q1-TS171 1 ea
9 Membrane switch 32P5-TS032 1 ea
4.
4.
4.
4. Assembly
Assembly
Assembly
Assembly instructions
instructions
instructions
instructions
The following parts list & step-by-step assembly procedures have been prepared to assemble and operate the S
25T // S25TX // S25TXi Model treadmill as quick and easy as possible. Please take special note of the follow
ing important matters prior to choosing a location and beginning assembly of the treadmill.
Important safety instructions!
To reduce the risk of injury, read the following instructions before assembling and operating the treadmill.
� DO
DO
DO
DO read the entire operation manual prior to operating this machine.
�
DO
DO
DO
DO verify the contents of the delivery prior to setting the machine. I f there are any missing parts, con
tact STEX(Sales dealer or our service center) at the number listed in the operation manual. Keep the ship
ping cartons in case of returning.
� DO
DO
DO
DO keep the treadmill indoors, away from moisture the high humidity and dust.
�
DO
DO
DO
DO NOT
NOT
NOT
NOT operate treadmill and contact STEX(Distributor of Our Service Center) at the telephone numb
er listed in the operation manual if it has been dropped, damaged, or even partially immersed in water.
�
DO
DO
DO
DO keep the area around treadmill clear, locate the Treadmill on a clear and leveled floor.
< 37 >
Accompanying parts
No Parts Q ’ TY
Models
S 25T S25TX S25TXi
1
Master main frame
1
○ ○ ○
2
Display support R
1 ○ ○ ○
3
Display support L
1 ○ ○ ○
4
Hexagon socket head // (SEMS) M8x20L
10 ○ ○ ○
5
Display console assembly
1 ○ ○ ○
6
Hexagon socket head // (SEMS) M8x20L
4
○ ○ ○
7
Display top assembly
1
○ ○ ○
8
Hexagon socket head // (SEMS) M8x 5 0L
4 ○ ○ ○
Tools required for assembly
Screw driver, 6mm L-wrench, 17 ” Spanner
< 38 >
Assembly procedures
�
S25T
1. Check the contents //Accompanying parts, required tools, & others …
2. Disjoint the FRONT COVER and TOP MOTOR COVER
① Unfasten the 2 bolts(M8×20mm) from the FRONT COVER with 6mm L-wrench.(1)
② Unfasten the 4 bolts(M5×12mm) from the TOP MOTOR COVER with Screw driver.(2)
< 39 >
3. Secure the DISPLAY SUPPORT
① Unwrap the cables . Lead the cables through the DISPLAY SUPPORT R and Pull out the cables to the DIS
PLAY SUPPORT R end.(1)
1) Main cable - S25T, S25TX
2) RF cable - S25TX
3) Adapter cable - S25TX
4) HDMI cable (Option) - S25TX
5) CSAFE cable (Option) - S25TX
② Slide the DISPLA Y SUPPORT R down over the DISPLAY UPPORT R BRK and Fasten 5 bolts(M8×20mm)
with 6mm L-wrench.(2)
③ Slide the DISPLAY SUPPORT L down over the DISPLAY SUPPORT L BRK and Fasten 5 bolts(M8×20m
< 40 >
m) with 6mm L-wrench.(2)
4. Secure the FRONT COVER and TOP MOTOR COVER
① Position the TOP MOTOR COVER as shown.
② Assemble the TOP MOTOR COVER with MASTER MAIN FRAME. Fasten the 4 bolts(M5×12mm) to four
holes of the TOP MOTOR COVER with Screw driver.(1)
③ Position the FRONT COVER as shown.
④ Assemble the FRONT COVER with MASTER MAIN FRAME. Fasten the 2 bolts(M8×20mm) to four holes
of the FRONT COVER with 6mm L-wrench.(2)
< 41 >
5. Secure the DISPLAY CONSOLE ASSEMBLY
① Connect the cables between the DISPLA Y CONSOLE ASSEMBLY and DISPLAY SUPPORT as shown.(1)
1) Main cable - S25T , S25TX
- Connect the Main cable(+) and Main cable(-) .
2) RF cable - S25TX
- Connect the RF cables(+) with Gender .
3) Adapter cable - S25TX
- Connect the Adapter cable(+) and Adapter cable(-) .
4) HDMI cable (Option) - S25TX
- Connect the HDMI cables(+) with Gender .
5) CSAFE cable (Option) - S25TX
- Connect the CSAFE cable(+) and CSAFE cable( - ) .
② Slide the D ISPLAY CONSOLE ASSEMBLY on the D ISPLAY SUPPORT and Fasten 4 bolts(M8×20mm) w
ith
6mm L-wrench.(2)
< 42 >
6 . Secure the DISPLA Y TOP ASSEMBLY - S25T
① Connect the cables between the DISPLAY CONSOLE ASSEMBLY and DISPLAY TOP ASSEMBLY as sh
own .(1)
1) Data cable - S25T
- Connect the Data cable with the INTERFACE BOARD of the DISPLAY CONSOLE ASSEMBL Y .
2) Key cable
–
S25T, S25TX
- Connect the Key cable with the INTERFACE BOARD of the DISPLA Y CONSOLE ASSEMBL Y .
② Stand the DISPLAY TOP ASSEMBLY .
Fasten 4 bolts(M8 × 50mm) with 6mm L-wrench.(2)
< 43 >
Assembly procedures
�
S25TX, S25TXi
1. Check the contents //Accompanying parts, required tools, & others …
2. Disjoint the FRONT COVER and TOP MOTOR COVER
① Unfasten the 2 bolts(M8×20mm) from the FRONT COVER with 6mm L-wrench.(1)
② Unfasten the 4 bolts(M5×12mm) from the TOP MOTOR COVER with Screw driver.(2)
< 44 >
3. Secure the DISPLAY SUPPORT
① Unwrap the cables . Lead the cables through the DISPLAY SUPPORT R and Pull out the cables to the DIS
PLAY SUPPORT R end.(1)
1) Main cable - S25T, S25TX
2) RF cable - S25TX
3) Adapter cable - S25TX
4) HDMI cable (Option) - S25TX
5) CSAFE cable (Option) - S25TX
② Slide the DISPLA Y SUPPORT R down over the DISPLAY UPPORT R BRK and Fasten 5 bolts(M8×20mm)
< 45 >
with 6mm L-wrench.(2)
③ Slide the DISPLAY SUPPORT L down over the DISPLAY SUPPORT L BRK and Fasten 5 bolts(M8×20m
m) with 6mm L-wrench.(2)
4. Secure the FRONT COVER and TOP MOTOR COVER
① Position the TOP MOTOR COVER as shown.
② Assemble the TOP MOTOR COVER with MASTER MAIN FRAME. Fasten the 4 bolts(M5×12mm) to four
holes of the TOP MOTOR COVER with Screw driver.(1)
③ Position the FRONT COVER as shown.
④ Assemble the FRONT COVER with MASTER MAIN FRAME. Fasten the 2 bolts(M8×20mm) to four holes
of the FRONT COVER with 6mm L-wrench.(2)
< 46 >
5. Secure the DISPLAY CONSOLE ASSEMBLY
① Connect the cables between the DISPLA Y CONSOLE ASSEMBLY and DISPLAY SUPPORT as shown.(1)
1) Main cable - S25T , S25TX
- Connect the Main cable(+) and Main cable(-) .
2) RF cable - S25TX
- Connect the RF cables(+) with Gender .
3) Adapter cable - S25TX
- Connect the Adapter cable(+) and Adapter cable(-) .
4) HDMI cable (Option) - S25TX
- Connect the HDMI cables(+) with Gender .
5) CSAFE cable (Option) - S25TX
- Connect the CSAFE cable(+) and CSAFE cable( - ) .
② Slide the D ISPLAY CONSOLE ASSEMBLY on the D ISPLAY SUPPORT and Fasten 4 bolts(M8×20mm) w
ith
< 47 >
6mm L-wrench.(2)
6 . Secure the DISPLA Y TOP ASSEMBLY - S25TX, S25TXi
① Connect the cables between the DISPLAY CONSOLE ASSEMBLY and DISPLAY TOP ASSEMBLY as
shown .(1)
1) Scaler comm cable - S25TX
- Connect the Scaler comm cable with the INTERFACE BOARD of the D ISPLAY CONSOLE ASSEMBLY .
2) Key cable - S25T, S25TX
- Connect the Key cable with the INTERFACE BOARD of the DISPLA Y CONSOLE ASSEMBL Y .
3) Adapter cable - S25TX
- Connect the Adapter cable as shown.
4) HDMI cable(Option) - S25TX
< 48 >
- Connect the HDMI cable as shown.
5) Earphone cable - S25TX
- Connect the Earphone cable as shown.
6) I POD OUTPUT cable - S25TX
- Connect the I POD OUTPUT cable as shown.
7)
RF cable - S25TX
- Connect the RF cable w i th as shown.
8) USB cable - S25TX
- Connect the USB cable as shown.
② Stand the DISPLAY TOP ASSEMBLY.
Fasten 4 bolts(M8×50 mm ) with 6mm L-wrench .(2)
Pre-operation check!
① Ensure that all screws are tight.
② Ensure that the treadmill is properly leveled and stable.
③ Ensure that the leveler nuts are tight.
④ Read the entire operation manual before using the treadmill.
Loading...