Stewart Audio NetAV I/O 2x2 Datasheet

NetAV I/O 2x2

Network Bridge Accessory

The NetAV I/O 2x2 is a simple digital on or off ramp for Dante™*

applications. With the world fast moving into the digital age there

remain plenty of legacy devices that are analog. The NetAV I/O

2x2 is the easiest way to bring them into the digital age. With two

balanced analog inputs (line level, Mic and 24V phantom power)

that are automatically encoded, any analog audio signal can be

made available to the network. By the same token any Dante signal

on the network can be converted to an analog output (2 channels)

for use by legacy devices requiring an analog signal. This solution

makes the use of networked audio more affordable by integrating

existing analog equipment into the design. One the many benets

of using a Networked Audio systems is the ability to route signals

to anywhere on the network, the NetAV I/O is a critical bridge

device at the edge of the network conveying signals on and off.

NetAV I/O 2x2

Features:

• Sub Compact 1/4 rack package

• Two mic/line inputs with selectable pre-gain

and phantom power

• Two analog outputs from network

• Congurable via DIP switches

• External inline power supply

• Made in the USA

Applications:

• New or existing installations which

need to add additional inputs or outputs

• Retrotting non-networked ampliers for

network usage

• Add legacy devices to the network

• Networked microphone paging

14397 Cuesta Court Ste D1 • Sonora Ca 95370 • TEL: [phone] • www.stewartaudio.com

NetAV I/O 2x2

Network Bridge Accessory

Input Connectors
Output Connectors
System THD
Mic / Line Input Type
Phantom Power
Mic / Line Gain
Input Impedance

Equivalent Input Noise
Maximum Input Levels
Output Type
Output Gain
Output S/N
Maximum Output Level
Power Supply
Construction
Operating Temperatures
Cooling
Dimensions (height, width, depth)
Weight
Warranty

RJ45, Euroblock
RJ45, Euroblock
<.05% at any gain, input signal 3dB below maximum
Balanced & RF Filtered Euroblock
+24V, selectable via DIP Switch
0dB, +28dB switch selectable
20K balanced
10K unbalanced

1.2K when Phantom Power is on

-110dBu
+6dBu @ 0dB Gain
Balanced line level
0dB nominal
>100dB
+6dBu
External In-Line 5VDC
Aluminum Chassis
0°C - 40°C
Convection Cooling

1.30” H x 4.80” W x 3.30” D

0.57lbs (0.26kg)

3 Years

14397 Cuesta Court Ste D1

Sonora Ca 95370

TEL: [phone]

www.stewartaudio.com

Rev B