Page 1
MC850 Series
8-Channel Ampliers
The MC850 Series is a family of 8-channel audio ampliers
producing 50WRMS/channel in a 1RU enclosure. This series includes
3 models, a low impedance (4/8Ω) model, a constant voltage
(70.7Vv/100V selectable) model, and a mixed model (2 channels
4/8Ω, 6 channels constant voltage). These networked ampliers
feature 8 independent channels of Dante™ audio using the
Brooklyn II module. The units feature two Ethernet jacks which can
be congured for primary and secondary fully-redundant Dante™
networks, or as a switch to allow daisy-chaining devices. An
additional Ethernet Port is provided for amplier control and status.
In addition there is an RS-232 port for level control and muting.
These ampliers are convection cooled, to reduce the noise footprint
in quiet spaces. The aluminum rack-mount enclosure occupies
a 19” rack width by 11” or 14.5” deep (depending on model),
and is only 1RU high. Rack mounts are included with each unit.
MC850 Series
Dante Model Ordering Part #’s
MC850-LZ-D 50W x 8 @ 4/8Ω
MC850-CV-D 50W x 8 @ 70V/100V
MC850-MXZ-D 50Wx2@4/8Ω
50W x 6 @ 70V/100V
*AES67 Support
Features:
• 8 Channels of amplication
• Flexible CH to CH power sharing
• Ethernet and RS-232 control
• 8 Independent Dante™ channels
• Redundant network capable
• Made in the USA
Applications:
• Dante™ Network Audio
• Hospitality Installations
• Classrooms
• Conference Rooms
• Houses of Worship
• Room combining
MC850 LZ-D shown
14335 Cuesta Court Ste C • Sonora Ca 95370 • TEL: 209.588.8111 • www.stewartaudio.com
Page 2
MC850 Series
Output Power MC850 LZ-D
MC850 CV-D
MC850 MXZ-D
Frequency Response (+0, -3dB)
THD+N
Signal-to-Noise Ratio
Channel-to-Channel Isolation (Crosstalk)
Audio Sampling Rates
Power Draw - Standby
Idle,
1/8 Power,
Full Power
Amplier Class
Control and Status
Dante Network Audio Input Connectors
Output Connectors
LED Indicators
Power Supply Input
Construction
Mounting
Cooling
Dimensions (excluding rack mounts)
Weight
Warranty
50W x 8 @ 4/8 Ohms
50W x 8 @ 70.7V/100V (selectable)
50W x 2 @ 4/8 Ohms,
50W x 6 @ 70.7V/100V (selectable)
All models: channel-by-channel power allocation
20 Hz—20 kHz 4/8 Ohms, 100 Hz—20 kHz 70.7V/100V
<0.1% @ rated output power, all frequencies
>95dB
>95dB
44.1, 48, 88.2, 96, 176.4, 192 ksps
4.1W
28W
103W
585W
D
RS-232 and Ethernet
Two (2) RJ-45 (switched or redundant)
Eight (8) 5mm Euroblock
Power, fault, signal (x8)
100-240 VAC 50/60Hz (PFC Universal Input)
Aluminum chassis
19” Rack-mountable, rack ears supplied
Convection (No fans)
1.74” X 17.3” X 14.5” (44 X 440 X 369 mm) CV & MXZ
1.74” X 17.3” X 11.0” (44 X 440 X 280 mm) LZ
5 lbs. (2.3kg) LZ; 12lbs. (5.5kg) MXZ; 13 lbs. (5.9kg) CV
3 years
MC850 MX-D shown
14335 Cuesta Court Ste C
Sonora Ca 95370
TEL: 209.588.8111
www.stewartaudio.com
Rev G
Loading...