Stern Pinball AEROSMITH LE, AEROSMITH PREMIUM, 500-55I6-01, 500-55I7-01 Service And Operation Manual

AEROSMITH

SERVICE AND OPERATION MANUAL

WARNING

IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images, including ashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause “photosensitive epileptic seizures” due to certain visual images, ashing lights or patterns. Symptoms can include light-headedness, altered vision, eye or face twitching, jerking or shaking of arms or legs, disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.

IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.

Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA; each pinball machine has unique characteristics that make it a one-of-a-kind American-made product. Each machine will have variations in appearance resulting from differences in the machine’s particular wood parts, individual silk screened art and mechanical assemblies. Stern Pinball has inspected each game element to ensure it meets our quality standards.

Games congured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe UK, Australia).

MANUAL #780-50I6-00

AEROSMITH LE #500-55I6-01

AEROSMITH PREMIUM #500-55I7-01

1-800-KICKERS - parts.service@sternpinball.com

www.sternpinball.com - facebook.com/sternpinball

TABLE OF CONTENTS

1. Setup and Moving .................................. 3

1.1 First-Time Setup Instructions ............................... 3

1.2 Adjustments Menu ............................................... 6

1.3 Transporting the Game ........................................ 7

1.4 Maintenance ........................................................ 8

1.5 Maintenance Kits ................................................. 8

1.6 Common Parts ..................................................... 8

2. SPIKE System and Node Guide ............ 9

2.1 SPIKE System Overview ...................................... 9

2.2 Node Bus Cabling ................................................ 9

2.3 System Power ...................................................... 9

2.4 SPIKE Node addresses ........................................ 9

2.5 SPIKE Node Programming................................. 10

2.6 SPIKE System Terminology ............................... 10

2.7 Common SPIKE Node Boards ........................... 10

3. Light, Switch, and Driver Reference ... 11

3.1 SPIKE Node Boards ........................................... 11

3.2 Driver Reference ................................................ 11

3.3 Switch Reference ............................................... 13

3.4 Light Reference .................................................. 17

3.5 Motor Reference ................................................ 21

4. Electronic Pinouts and Schematics.... 22

4.1 SPIKE-2 CPU Node 0 ........................................ 22

4.2 Node 1 Cabinet .................................................. 24

4.3 Lower Playeld 48V Driver Pinout Node 8 ......... 25

4.4 Mid Upper Playeld 48V Driver Pinout Node 9 . . 26

4.5 Playeld 48V 4-Driver Pinout Node 10 .............. 27

4.6 Feature LED Board 8b ....................................... 28

4.7 Right LED Board 8c ........................................... 28

4.8 Through Serial Opto Receiver Extension 8a ...... 28

4.9 Left LED Board 8d ............................................. 29

4.10 Serial Motor Driver Board 8e ............................. 29

4.11 Center LED Board 9a ......................................... 30

4.12 Mini Playeld LED Board 10a ............................ 30

4.13 Main Power Supply ............................................ 30

4.14 Power Distribution Board ................................... 31

4.15 Power Plug Wiring.............................................. 31

5. Parts Reference .................................... 32

5.1 Playeld Rubber Parts ....................................... 32

5.2 Rubber Size Chart .............................................. 32

5.3 Playeld Assemblies, Top .................................. 33

5.4 Playeld Assemblies, Bottom ............................ 34

5.5 Backbox Parts.................................................... 35

5.6 Speaker Panel Parts .......................................... 35

5.7 Cabinet Parts ..................................................... 36

5.8 Ball Shooter Assembly ....................................... 37

5.9 Bottom Arch Assembly ...................................... 37

5.10 Auto Launch Assembly ...................................... 37

5.11 Ball Trough Assembly......................................... 38

5.12 Flipper Assembly - Mini Playeld ....................... 38

5.13 Flipper Assembly, Left ........................................ 39

5.14 Flipper Assembly, Right ..................................... 39

5.15 Front Mold Assembly LE .................................... 40

5.16 Front Mold Assembly LE .................................... 40

5.17 Front Mold Assembly Premium .......................... 40

5.18 Front Mold Assembly Premium .......................... 40

5.19 Pop Bumper Assembly ...................................... 41

5.20 Buty Assembly #02 ............................................ 42

5.21 Buty Assembly #04 ............................................ 42

5.22 Buty Assembly #05 ............................................ 42

5.23 Buty Assembly #09 ............................................ 42

5.24 Buty Assembly #10 ............................................ 43

5.25 Buty Assembly #12 ............................................ 43

5.26 Buty Assembly #14 ............................................ 43

5.27 Buty Assembly #23 ............................................ 43

5.28 Buty Assembly #24 ............................................ 44

5.29 Buty Assembly #25 ............................................ 44

5.30 Buty Assembly #26 ............................................ 44

5.31 Buty Assembly #27 ............................................ 44

5.32 Buty Assembly #30 ............................................ 45

5.33 Buty Assembly #32 ............................................ 45

5.34 Buty Assembly #35 ............................................ 45

5.35 Electric Gate Assembly ...................................... 45

5.36 Pop Bumper Top Assembly ............................... 46

5.37 Bumper Ring Top Assembly............................... 46

5.38 Toy Box Front Plate Assembly ........................... 46

5.39 Bumper Assembly - Toy Box ............................. 46

5.40 Toy Box Up Kicker Assembly ............................. 47

5.41 Toy Box Tube Assembly ..................................... 47

5.42 Toy Box Plate Assembly .................................... 48

5.43 Ark Slider-Crank Assembly ................................ 48

5.44 VUK Assembly ................................................... 49

5.45 Rear VUK Assembly ........................................... 49

5.46 Left Ramp Assembly .......................................... 50

5.47 Right Ramp Assembly ....................................... 50

5.48 Eject VUK ........................................................... 50

5.49 One Way Gate Assembly ................................... 50

5.50 40 Degree Kicker - Long Throw ......................... 51

5.51 Ball Guide Assembly #04 ................................... 51

5.52 Gate Assembly ................................................... 51

5.53 Back Panel Assembly ........................................ 51

6. Specications ....................................... 52

6.1 Game Dimensions .............................................. 52

6.3 Warranty ............................................................. 53

6.2 Warnings, Compliance, and Legal Notices ........ 53

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SETUP AND MOVING

1. SETUP AND MOVING

1.1 FIRST-TIME SETUP INSTRUCTIONS

Your brand new Stern Pinball Machine is carefully packed for safety and security. For your safety, exercise caution and use the correct tools and sufcient help when setting up your new game.

TOOLS REQUIRED

• 5/8” Socket Wrench

• Utility Knife

• Snips

• An Assistant

CAUTION: AT LEAST TWO (2) PEOPLE ARE REQUIRED TO MOVE AND MANEUVER THE GAME. USE PROPER MOVING EQUIPMENT AND EXTREME CARE WHILE HANDLING. STERN PINBALL MACHINES WEIGH OVER 250LBS BOXED.

1. Locate the side labeled “TRUCK THIS SIDE ONLY”. The bottom of the game faces this side.

2. Open the top box aps by pulling hard in an upward motion on each ap. If the aps are taped, cut the tape rst, taking care to avoid the box staples.

8. Install front legs using the bolts removed from the cabinet. Secure tightly.

9. Have someone help you carefully set the game down on the front legs.

3. Remove the four (4) foam pieces and two (2) narrow box tubes which contain the four (4) identical legs with levelers.

4. DO NOT CUT STRAPPING YET. Keep backbox secured in the down position.

5. With the utility knife, carefully cut down the left and right corners of the box.

10. Set aside the open box.

11. With a ⅝” socket wrench, loosen and remove the 2 leg bolts on each side of the rear cabinet, 4 total.

6. Let the face fall forward and remove the entire side by carefully cutting the bottom.

7. With the game still in its folded position, use a ⅝” wrench to loosen and remove the 2 leg bolts on each side of the front cabinet. Ensure the leg levelers are screwed all the way into the legs.

12. Using supports or two people, prop the rear of the cabinet up.

13. Ensure the rear leg levelers are screwed all the way into the legs.

14. Install rear legs using the 4 bolts removed from step 11.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SETUP AND MOVING

FIRST-TIME SETUP CONTINUED

15. Cut nylon strapping and remove protective strap corner guards.

16. Locate the factory keys, either on the shooter rod or taped to the playeld glass.

17. Using snips, cut the tie-wrap securing the keys if required. One set of keys is for the front coin door, the other set of keys is for accessing components in the backbox.

24. Locate the two (2) backbox bolts in the cash box.

25. Carefully raise backbox to upright position while ensuring that cables are not pinched.

26. Use the ⅝” wrench to Install the two (2) backbox bolts to secure the backbox as indicated on the back of the cabinet.

18. Open the front coin door.

19. Reach into the game and remove the retaining clip at the rear of the cash box.

20. Remove the cash box lid by sliding it toward you.

21. Store the backbox keys, if desired, on the metal hook located in the coin door.

22. Locate and remove the pinballs, plumb bob, and backbox bolts from the cash box.

23. Replace the cash box lid and retaining clip for future use.

27. Reach inside the cabinet and lift the two latches located on either side of the coin door.

28. Remove the front top molding.

29. Remove the playeld glass by sliding it toward you and carefully place it in a safe location. Remove all playeld shipping tie downs, shipping blocks, and packing foam, and follow any game-specic unpacking instructions included in the playeld, if present.

CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS AND CORNER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHICALLY. TAKE CARE TO STORE THE GLASS ON A SOFT, ROOM-TEMPERATURE SURFACE AND PREVENT THE CORNERS FROM BEING DAMAGED.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

FIRST-TIME SETUP CONTINUED

SETUP AND MOVING

30. If pinballs were already installed into the lower ball trough, remove them before lifting the playeld.

31. Grasp the lower arch between the ippers, and rmly but gently pull directly up to raise the playeld 8 to 12 inches.

32. While holding the playeld up, pull the playeld toward you until the two playeld supports are over the front edge of the cabinet.

33. Rest the playeld on the front edge of the cabinet.

34. Raise the playeld and rest it against the backbox.

35. Visually inspect all cabinet cables and connector terminations; ensure no wires or cables are pinched and that cable harnesses are not pulled tight.

36. Locate the plumb bob in the parts bag in the cash box.

37. Slide plumb bob onto the hanger wire. Note: the vertical position of the plumb bob affects tilt sensitivity - higher makes the game more sensitive to tilting.

38. Tighten the thumb screw nger-tight.

39. Install the correct number of pinballs. Refer to the decal on the lock down assembly for the correct number of pinballs.

LOCATING, LEVELING, AND FINAL SETUP

1. Select a location that is indoors, out of direct sunlight, and climate controlled. Excessive moisture/humidity can cause long-term damage to your game.

2. Adjust the front or rear levelers as necessary to position the playeld level bubble, located on the front right of the playeld next to the shooter lane, to oat between the two (2) black lines. This will place the playeld at the recommended 6.5° pitch. Playeld angles greater than

6.5° can be achieved by turning out the rear leg leveler(s) for increased difculty and faster gameplay.

3. Use a pinball to roll down the center of the playeld for side-to-side leveling, or use an external bubble level, digital level, or smartphone level app.

4. Plug into a grounded outlet and check for proper operation through DIAGNOSTICS.

5. Check the coin door: With the door closed, insert coins to verify proper operation.

6. Play game: Check for satisfactory operation and adjust game volume (push the Red Buttons inside the Coin Door).

7. If desired, perform any game diagnostics, game adjustments, and pricing settings at this time.

SPIKE PINBALL SOFTWARE UPDATE INSTRUCTIONS

1. Obtain game software update le (lename ends in “.spk”) from www.sternpinball.com or from authorized Stern distributor.

2. Place game software update le ( “.spk”) in root directory of a blank FAT32-formatted USB ash drive

3. Use backbox power switch to turn off game

4. Plug in USB ash drive to CPU board USB connector (CN20 or CN21). Refer to www. sternpinball.com

5. Turn on game

6. The game will automatically begin software update

7. Select the correct .spk update le from list.

8. Press Enter on the service switches to start update

9. When the display indicates “Update Complete”, turn off game

10. Remove USB ash drive from CPU board

11. Turn game on to complete the update and play pinball!

12. Detailed instructions and troubleshooting tips are available in the game manual, www.sternpinball.com and authorized Stern distributors.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SETUP AND MOVING

1.2 ADJUSTMENTS MENU

STANDARD ADJUSTMENTS

Perform the below steps to review the adjustments.

Enter the Service Menu, then enter the Standard Adjustments Menu.

Press SELECT. Press BACK to exit or escape at any time.

Press [>]. Go to the ADJ icon. Press SELECT.

Go to the S.P.I. icon. Press SELECT.

ID Adjustment Name Default Setting

1 REPLAY TYPE AUTO

2 REPLAY PERCENTAGE 10% 3 REPLAY AWARD CREDIT

4 REPLAY LEVELS 1 5 AUTO REPLAY START 20,000,000 6 DYNAMIC REPLAY START 60,000,000

7 REPLAY LEVEL #1 15,000,000 8 REPLAY LEVEL #2 30,000,000 9 REPLAY LEVEL #3 45,000,000

10 REPLAY LEVEL #4 60,000,000 11 REPLAY BOOST YES 12 SPECIAL LIMIT 1 13 SPECIAL PERCENTAGE 10% 14 SPECIAL AWARD CREDIT 15 FREE GAME LIMIT 5 16 EXTRA BALL LIMIT 5 17 EXTRA BALL PERCENTAGE 25% 18 GAME PRICING USA 11 19 MATCH PERCENTAGE 9% 20 MATCH AWARD CREDIT 21 BALLS PER GAME 3

22 TILT WARNINGS 2 23 CREDIT LIMIT 30

24 ALLOW HIGH SCORES YES 25 HIGH SCORE AWARD CREDIT 26 GRAND CHAMPION AWARDS 1

27 HIGH SCORE #1 AWARDS 1 28 HIGH SCORE #2 AWARDS 0 29 HIGH SCORE #3 AWARDS 0

30 HIGH SCORE #4 AWARDS 0 31 GRAND CHAMPION SCORE 75,000,000

32 HIGH SCORE #1 55,000,000 33 HIGH SCORE #2 40,000,000

STANDARD ADJUSTMENT #1 appears with the adjustment name ashing. While the adjustment name is ashing press [<] [>] to move between adjustments.

To change the adjustment setting press SELECT. While the adjustment setting is ashing, press [<] [>] repeatedly until the desired setting appears. Press the SELECT button to “install” the change. The adjustment comment (bottom line) will indicate if the factory default setting is selected or will display INSTALLED if the change is not a factory default setting.

ID Adjustment Name Default Setting

34 HIGH SCORE #3 30,000,000 35 HIGH SCORE #4 25,000,000 36 HSTD INITIALS 3 INITIALS

37 HSTD RESET COUNT 2000 38 FREE PLAY NO 39 LANGUAGE ENGLISH

40 PLAYER LANGUAGE SELECT YES 41 CUSTOM MESSAGE ON 42 FLASH LAMP POWER NORMAL 43 COIL PUSLE POWER NORMAL 44 KNOCKER VOLUME NORMAL 45 GAME RESTART YES 46 BILL VALIDATOR NO 47 MUSIC VOLUME 1 48 BALL SAVE TIME 0:05 49 TIMED PLUNGER OFF 50 FLIPPER BALL LAUNCH OFF 51 COINDOOR BALL SAVER NO 52 COMPETITION MODE NO 53 CONSOLATION BALL YES 54 FAST BOOT YES 55 Q24 OPTION COIN METER 56 TICKET DISPENSER NO 57 PLAYER COMPETITION YES 58 TEAM SCORES NO 59 LOCATION ID 0 60 GAME ID 0 61 TIME FORMAT 12-HOUR 62 COIN INPUT DELAY 30 63 LOST BALL RECOVERY YES 64 COIN DOOR DISABLE TILT NO 65 BACKBOX BRIGHTNESS 100% 66 COIN DOOR OPEN B.BOX BRIGHTNESS 10%

FEATURE ADJUSTMENTS

Each table has feature adjustments specic to the characteristics of that game. To access feature adjustments enter the Service Menu and then enter the Adjustments Menu.

Press SELECT to access the Service Menu. Press BACK to exit or escape at any time.

Press [>]. Go to the ADJ icon. Press SELECT.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Go to the game icon. Press SELECT.

FEATURE ADJUSTMENT #1 appears with the adjustment name ashing. With the adjustment name ashing press [<] [>] to move between adjustments. Feature adjustments are changed similarly to standard adjustments using the SELECT button to choose options and the [<] [>] buttons to cycle through available settings.

1.3 TRANSPORTING THE GAME

SETUP AND MOVING

When transporting the game, such as in the back of a truck or with a hand truck, the game’s backbox must be secured to prevent damage to the side rails.

1. SECURE THE BACKBOX

1. Ensure that the pinballs are removed from the playeld, and secure any free-moving mechanisms that may get damaged in transport

TOOLS REQUIRED

• STRAP (500LB OR GREATER)

• AN ASSISTANT

• HAND TRUCK

CAUTION

NEVER TRANSPORT THE GAME IN A MOVING VEHICLE WITH THE BACKBOX RAISED! TWO PEOPLE ARE REQUIRED TO REMOVE THE LEGS!

2. REMOVE THE LEGS AND STAND UP

2. Remove the backbox securing bolts

3. Carefully lower the backbox onto the side rails. Use a piece of cardboard or suitable padding between the backbox and the game.

8. Stand the game up on its back.

4. Securely strap the back box to the game

5. The game may be transported with the legs on. If the legs must be removed, follow the remaining steps.

9. Remove the front two legs.

6. Remove the legs, rear legs rst. Use a stool or a friend to support the rear of the game.

7. Rest the rear of the game on the ground.

10. Secure all loose parts and transport with a hand truck in the upright position.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SETUP AND MOVING

1.4 MAINTENANCE

REGULAR MAINTENANCE - (MONTHLY/500 GAMES)

• Remove the playeld glass

• Enter the software diagnostics menu, start lamp test, then

clean and wax the playeld.

◊ While cleaning the playeld, identify and repair malfunctioning

lights, loose parts, cracked plastics and worn rubber parts.

• While in diagnostics, enter the switch test (Select the "SW" Icon, then "TEST" Icon).

◊ Use a pinball to actuate all switches and verify the correct

switch registers with the switch test.

◊ The game will play a sound to conrm the switch.

• Lift the playeld and inspect all assemblies for loose parts, broken wires or excessive wear. Look at the bottom of the cabinet for any parts that may have worked loose, then nd the source.

• Check all coin door mechanisms and bill acceptor (if installed) for proper operation

• Play the game to ensure all coils and features are working

• Check the playeld to ensure it is level and set to the proper

pitch using the bubble level on the right side wood rail.

• Check game audits: Replay % and Ball Time and note abnormal values which can indicate problems.

• Ensure game volume is set appropriately for the location.

• Clean both sides of the playeld glass and reinstall.

• Check and clean pinballs and replace if excessively worn or

scuffed. Dirty pinballs accelerate game wear.

OVERHAUL MAINTENANCE - (5000 GAMES)

• Verify latest game software is installed

• Check ippers for excessive wear. Excessive ipper sloppi-

ness (vertical or horizontal) or weakness indicates a ipper rebuild is required.

• Clean machine inside and out and check leg levelers for free operation.

• Visual check for loose or broken playeld and cabinet parts and repair as necessary.

• Electrical check: Plug into grounded outlet and check for proper operation through DIAGNOSTICS.

• Replace worn or dirty rubbers.

• Replace pinballs.

• Check all playeld switches with a pinball.

• Check all settings (refer to manual for factory settings).

• Check coin door: With door closed, insert coins to verify

proper operation.

• Check for proper adjustment of the plumb bob tilt.

• Play game: Check for satisfactory operation.

COMMON PINBALL TOOLS

• Common nut drivers (¼”, 5/16”, 11/32", ⅜”)

• Phillips screwdriver

• Standard Allen wrench/Hex key set

• ⅝” Socket with ratchet

• Adjustable wrench (5/8" & 9/16")

• 6" Torpedo Level (or use a pinball

• Flashlight or headlamp

• Soldering Iron (60w with at tip), lead-free solder

• Wire cutter

• Wire stripper

• Long nose (“needle nose”) pliers

1.5 MAINTENANCE KITS

Description Part Number

Aerosmith LE/Premium Maintenance Kit

8 oz pinball playeld wax (Novus # 2) (675-0003-01)

Standard Pinball (260-5000-00)

Cleaning Cloth

All Playeld Rubber Rings

Spare Fuses

Aerosmith LE/Premium Deluxe Maintenance Kit

All standard kit items, plus:

Flipper rebuild kits, Left and Right (500-6307-10,-00)

Aerosmith LE Playeld Plastics Kit 803-5000-I6

Aerosmith Premium Playeld Plastics Kit 803-5000-I7

Aerosmith LE Playeld Decals Kit 802-5000-I6

Aerosmith Premium Playeld Decals Kit 802-5000-I7

Aerosmith LE Backbox Decal Left 820-78I6-01

Aerosmith Premium Backbox Decal Left 820-78I7-01

Aerosmith LE Backbox Decal Right 820-78I6-02

Aerosmith Premium Backbox Decal Right 820-78I7-02

Aerosmith LE Cabinet Decal Left 820-78I6-03

Aerosmith Premium Cabinet Decal Left 820-78I7-03

Aerosmith LE Cabinet Decal Right 820-78I6-04

Aerosmith Premium Cabinet Decal Right 820-78I7-04

Aerosmith LE Cabinet Decal Front 820-78I6-05

Aerosmith Premium Cabinet Decal Front 820-78I7-05

Aerosmith LE Playeld, Bare 830-5000-I6

Aerosmith Premium Playeld, Bare 830-5000-I7

Aerosmith LE Mirror Backglass 830-52I6-00

Aerosmith Premium Translite Backglass 830-52I7-00

502-6002-I6 502-6002-I7

502-6003-I6 502-6003-I7

1.6 COMMON PARTS

Description Part Number

8 oz Pinball Playeld wax (Novus # 2) 675-0003-01 Standard Pinball, 1-1/16 in 260-5000-00 Flipper Rebuild Kit Left (Standard) 500-6307-10 Flipper Base Plate Kit Left 515-6617-01 Flipper Rebuild Kit Right 500-6307-00 Flipper Base Plate Kit Right 515-6617-00

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPIKE SYSTEM AND NODE GUIDE

2. SPIKE SYSTEM AND NODE GUIDE

2.1 SPIKE SYSTEM OVERVIEW

The SPIKE Pinball system is a rugged, distributed, and embedded platform custom-designed for the rigors of the pinball machine environment. SPIKE takes advantage of modern technologies to deliver an immersive pinball experience that supports modern features, reduces cabling, and increases serviceability and reliability.

A Stern Pinball machine based on the SPIKE system will have at least two nodes networked together with the SPIKE node bus, a custom industrial pinball control bus that is designed around industry standards and optimized for the pinball environment. The primary CPU node is networked to one or more input/output nodes over standard Category 5 UTP (unshielded twisted pair) ethernet cabling.

There are ve primary types of nodes that are found in the game.

• CPU node (Node 0) - The primary node that controls other nodes in the system. Contains the primary game software for the system and provides SPIKE node bus power for other nodes.

• Cabinet 48V node (Node 1) - Specialized node with specic inputs and outputs for coin doors, tilt mechanisms, and other bottom-cabinet devices.

• 48V playeld node - Controls high power devices such as coils and ashers, and also supports a few switch and low-power outputs. Powered by the system 48V power supply.

• Light and switch node - High-density switch and low-power LED outputs, bus-powered from the node bus. These boards contain as many 32 switch inputs and light outputs.

• Node extensions - These sub-nodes add additional low-power input and outputs to a specic Power or I/O node and are connected with simple serial bus.

2.2 NODE BUS CABLING

The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin modular jacks, and off-the-shelf Category 5e or better ethernet cabling. The node bus is electrically different from Ethernet and does not utilize Ethernet or TCP/IP protocols or signaling standards. SPIKE nodes are not compatible with standard computer networking equipment.

CAUTION: Plugging a SPIKE Node or CPU board into a standard Ethernet port may damage one or both devices and void your warranty.

2.3 SYSTEM POWER

The SPIKE System is powered from an 48V DC power supply bus. Each SPIKE node converts this voltage to lower voltages required by the node and its specic components. A SPIKE 48V node typically controls high-power outputs such as game coil mechanisms and high-brightness LEDs. These powered nodes are supplied directly with 48V system power. SPIKE standard I/O nodes are low-power nodes that read switch inputs and output to standard-brightness LEDs. Standard I/O nodes use the node bus power, which is supplied by the main CPU node over the node bus modular jack connectors.

2.4 SPIKE NODE ADDRESSES

Each SPIKE node has a unique address ranging from 0 to 15. Not all addresses are used in all games. Nodes can be of the same part number, so the address is specied on the DIP switches on each node. When replacing a node, be certain that the correct address is set. Nodes can have 3-position and 4-position DIP switches. Refer to the appropriate table to set the address for each type of Node. The correct address for a node can be found in the SPIKE node reference section of the manual or in the game diagnostic software. Address 0 is reserved for the backbox CPU node, where the game software resides. Address 1 is reserved for the cabinet node, located inside the coin door. These two nodes do not have DIP switches as their address is not congurable.

Address 1 2 3

8 OFF OFF OFF 9 OFF OFF ON

10 OFF ON OFF 11 OFF ON ON 12 ON OFF OFF 13 ON OFF ON 14 ON ON OFF 15 ON ON ON

SPIKE node addresses for nodes with 3-position DIP switches. Addresses 0-7 are not used by SPIKE nodes with 3-position DIP switches.

Address 1 2 3 4

8 OFF OFF OFF OFF 9 OFF OFF ON OFF

10 OFF ON OFF OFF 11 OFF ON ON OFF 12 ON OFF OFF OFF 13 ON OFF ON OFF 14 ON ON OFF OFF 15 ON ON ON OFF

SPIKE node addresses for nodes with 4-position DIP switches. Addresses 0-7 are reserved for xed-function nodes and do not require conguration.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPIKE SYSTEM AND NODE GUIDE

SPIKE SYSTEM AND NODE GUIDE CONTINUED

2.5 SPIKE NODE PROGRAMMING

The SPIKE nodes are smart nodes that have on-board processors and run embedded code. The nodes are programmed automatically by the CPU node whenever software updates are installed to the CPU. When replacing a node, the CPU node will detect and update the node to the latest software with no user intervention. Always replace nodes with the power to the game turned OFF.

2.6 SPIKE SYSTEM TERMINOLOGY

MULTI GENERAL ILLUMINATION LIGHTING

General Illumination Lighting is two or more lights powered by one control source. These are often a number of LEDs connected in parallel and the system controls these as one large LED. A missing LED will not affect these circuits, however a shorted LED can cause the entire string of LEDs to turn off.

SINGLE LIGHTS

Single lights and LEDs are direct-controlled from SPIKE node boards. A common power source is grounded by individual transistors to turn individual LEDs on and off. Groups of LEDs, usually by node connector, share a common power source, so if a group of LEDs is out, check the wiring for the power source.

INPUT/OUTPUT PROTECTIONS

SPIKE features built-in short-circuit, static electricity, and other protections to maximize reliability. If an LED, coil or other device shorts, it will be disabled but will not shut down the entire system in most circumstances. Groups of LEDs, coils, and switches often share common power supplies or other circuits, so it is possible that a bad device will affect the group of related devices and require removal or repair to x the group. The system diagnostics will inform the technician of shorted or otherwise malfunctioning devices whenever possible. While the system is protected against permanent damage, it is strongly recommended to repair or replace these bad components as soon as possible to minimize downtime and maximize game earnings.

2.7 COMMON SPIKE NODE BOARDS

Description Type Part Number

SPIKE CPU Node Node 509-1000-00 Cabinet Node Node 520-6967-00 Playeld 48V Core-Driver Node Node 520-7017-72 Through Serial Opto Receiver Extension Extension 520-7001-00

FLASHERS

SPIKE games treat ashers the same as single LEDs that draw more power. Flashers are controlled from the same circuits that power regular lights.

DRIVERS

A driver is a circuit that controls a high power-device such as a coil, magnet, or motor. Each device has a common 48V power source that is then connected to ground by a dedicated control transistor. Each driver is protected against shorting, static electricity, and over-current conditions. Take caution as 48V is always present on a device even when it is not energized.

OPTOS

Certain types of optical switches (“optos”) require external signal conditioning. For these optos, they will interface to a SPIKE node via an opto signal conditioning board. Other optical switches connect directly to the Spike node board.

System Protections

CAUTION: Unless explicitly directed by an Authorized Stern Repair technician, perform ALL work on your pinball machine with the power disabled!

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

LIGHT, SWITCH, AND DRIVER REFERENCE

CABINET

CABINET NODE 1

BACKBOX

CPU NODE 0

CN5 CN4

CN11

CN22

CN13

CN3 CN2

CN1

CN3

CN1

CN3

CN1

CN4

CN1

CN2

CN1

CN14

CN3

CN1

When replacing node boards, ensure DIP address switches are set correctly!

PLAYFIELD REAR

PLAYFIELD FRONT

Node Bus Cable (RJ45)

Serial Data Cable

NODE BOARD ID INSTRUCTION SHEET

NODE 0

CN4

NODE 8b

NODE 8d

NODE 8a

NODE 8

NODE 9

NODE 10

NODE 9a

NODE 8e

NODE 10a

NODE 8c

PREMIUM/LE

3. LIGHT, SWITCH, AND DRIVER REFERENCE

3.1 SPIKE NODE BOARDS

ID DIP Address Description Location Part Number

Node 0 n/a SPIKE 2 CPU Node / WAND Board Backbox 509-1000-00 Node 1 n/a Cabinet Node Cabinet 520-6967-72 Node 8 OFF-OFF-OFF-OFF Lower Playeld 48V Core-Driver Node Lower Playeld 520-7017-72 8a n/a Trough Serial Opto Receiver Extension Playeld 520-7001-00 8b n/a Feature LED Board Playeld 520-7004-00 8c n/a Right LED Board Playeld 520-7006-00 8d n/a Left LED Board Playeld 520-7005-00 8e n/a Serial Motor Driver Board Playeld 520-6996-01 Node 9 OFF-OFF-ON-OFF Playeld 48V Core-Driver Node Playeld 520-7017-72 9a n/a Center LED Board Playeld 520-7007-00 Node 10 OFF-ON-OFF Playeld 48V 4 Coil Node Playeld 520-5329-10 10a n/a Mini Playeld Board Playeld 520-7015-00

3.2 DRIVER REFERENCE

ID Name Node Connector Ret.

1 Trough 8 CN8 7 ORG GRY 48V 4 GRY ORG Playeld Coil - 27-1500 8-DR-1 090-5004-ND 2 Auto Plunger 8 CN8 9 ORG WHT 48V 6 GRY ORG Playeld Coil - 23-800 8-DR-4 090-5044-ND 3 Left Flipper 8 CN8 6 ORG YEL 48V 4 GRY ORG Playeld Coil - 23-1100 8-DR-5 090-5030-ND

4 Right Flipper 8 CN8 5 ORG GRN 48V 6 GRY ORG Playeld Coil - 23-1100 8-DR-0 090-5030-ND 5 Left Slingshot 8 CN8 11 ORG BLU 48V 1-4 GRY ORG Playeld Coil - 26-1200 8-DR-3 090-5044-ND 6 Right Slingshot 8 CN8 10 ORG VIO 48V 1-4 GRY ORG Playeld Coil - 26-1200 8-DR-2 090-5044-ND

Ret. Wire Voltage V+

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

V+ Color Location Type Address Part Number

Continued on next page...

SPIKE SYSTEM AND NODE GUIDE

DRIVER REFERENCE CONTINUED

Figure 3.2.1. Playeld driver locations (top view).

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPIKE SYSTEM AND NODE GUIDE

DRIVER REFERENCE CONTINUED

ID Name Node Connector Ret.

7 Shaker Motor 1 CN2 1 BLU 48V 5 RED Cabinet Motor 1-DR-0 041-5029-04 8 U/P Left Flipper 8 CN7 4 YEL BLK 48V 1 GRY ORG Playeld Coil - 25-1400 8-DR-7 090-5067-ND 9 Left Scoop 8 CN7 2 YEL RED 48V 1 GRY ORG Playeld Coil - 26-1200 8-DR-8 090-5044-ND

10 Top Scoop 8 CN7 3 YEL BRN 48V 1 GRY ORG Playeld Coil - 24-940 8-DR-6 090-5036-ND 11 Toy Box Lid-Power 9 CN7 3 ORG 48V 1 GRY BRN Playeld Coil - 23-620 9-DR-6 090-5083-06-ND 12 Toy Box Lid-Hold 9 CN7 4 YEL GRN 48V 1 GRY BRN Playeld Coil - 30-3900 9-DR-7 090-5083-06-ND 13 14 Left Pop Bumper 9 CN8 10 ORG BLK 48V 1-4 GRY BRN Playeld Coil - 26-1200 9-DR-2 090-5044-ND 15 Right Pop Bumper 9 CN8 11 ORG BRN 48V 1-4 GRY BRN Playeld Coil - 26-1200 9-DR-3 090-5044-ND 16 Top Pop Bumper 9 CN8 9 ORG RED 48V 1-4 GRY BRN Playeld Coil - 26-1200 9-DR-4 090-5044-ND 17 18 19 Right Eject 9 CN8 7 YEL ORG 48V 1-4 GRY BRN Playeld Coil - 26-1200 9-DR-1 090-5044-ND 20 21 Toy Box Magnet 9 CN8 5 BRN BLK 48V 1-4 GRY BRN Playeld Coil - 22-650 9-DR-0 511-5065-ND

22 23 U/P Control Gate 10 CN5 3 BLU BLK 48V 4 GRY BLK Playeld Coil - 32-1250 10-DR-0 090-5060-01-ND

24 Center Drop Target-Down 10 CN7 3 BLU WHT 48V 4 GRY BLK Playeld Coil - 32-1800 10-DR-1 090-5031-00-ND 25 Center Drop Target-Up 10 CN9 3 YEL WHT 48V 4 GRY BLK Playeld Coil - 25-1240 10-DR-2 090-5034-ND 26

27 28 29

30 31

32 33 Coin Meter 1 CN3 2 BLK 12V 1 RED Cabinet Digital Out 1-DR-2 500-9946-00

34 Ticket Meter 1 CN4 2 BLK 12V 1 RED Cabinet Digital Out 1-DR-3 500-9946-00 35 Ticket Dispenser 1 CN11 3 12V 1 Cabinet Digital Out 1-DR-4

Ret. Wire Voltage V+

V+ Color Location Type Address Part Number

3.3 SWITCH REFERENCE

ID Name Node Node

1 Left Outlane 8 - CN11 4 LGN RED 11-12 BLK ORG Playeld Rollover 8-SW-17 500-9935-04 2 Left Return Lane-Left 8 - CN11 5 LGN ORG 11-12 BLK ORG Playeld Rollover 8-SW-18 500-9935-04 3 Left Return Lane-Right 8 - CN11 8 LGN VIO 11-12 BLK ORG Playeld Rollover 8-SW-21 500-9935-04

4 5 Right Return Lane 8 - CN11 6 LGN YEL 11-12 BLK ORG Playeld Rollover 8-SW-19 500-9935-03 6 Right Outlane 8 - CN11 7 LGN BLU 11-12 BLK ORG Playeld Rollover 8-SW-20 500-9935-04

7 Left Slingshot 8 - CN10 4 GRY BLU 8 BLK GRN Playeld Leaf 8-SW-30 180-5231-00 8 Right Slingshot 8 - CN10 3 GRY VIO 8 BLK GRN Playeld Leaf 8-SW-29 180-5231-00 9 Left Flipper Button 8 - CN9 4 GRY BRN 7 BLK GRN Cabinet Leaf 8-SW-25 180-5160-01

10 Right Flipper Button 8 - CN9 3 GRY RED 7 BLK GRN Cabinet Leaf 8-SW-24 180-5164-01 11 Left Flipper EOS 8 - CN10 6 GRY YEL 9 BLK GRN Playeld Leaf 8-SW-16 180-5149-00 12 Right Flipper EOS 8 - CN10 5 GRY GRN 9 BLK GRN Playeld Leaf 8-SW-31 180-5149-00 13 U/P Left Flipper Button 8 - CN9 6 VIO 8 BLK VIO Cabinet Leaf 8-SW-27 180-5164-01 14 U/P Left Flipper EOS 8 - CN13 9 PNK VIO 10 BLK BRN Cabinet Leaf 8-SW-7 180-5149-00 15 Trough 6 8 8a CN14 - - Playeld Opto 8-SW-32 520-5344-00 tx

16 Trough 5 8 8a CN14 - - Playeld Opto 8-SW-33 520-5344-00 tx

17 Trough 4 8 8a CN14 - - Playeld Opto 8-SW-34 520-5344-00 tx

Ext

Conn. Input

Input Wire GND

Ground Wire

Location Type Address Part Number

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

520-7001-00 rx

Continued on next page...

SPIKE SYSTEM AND NODE GUIDE

SWITCH REFERENCE CONTINUED

ID Name Node Node

18 Trough 3 8 8a CN14 - - Playeld Opto 8-SW-35 520-5344-00 tx

19 Trough 2 8 8a CN14 - - Playeld Opto 8-SW-36 520-5344-00 tx

20 Trough 1 8 8a CN14 - - Playeld Opto 8-SW-37 520-5344-00 tx

21 Trough Jam 8 8a CN14 - - Playeld Opto 8-SW-38 520-5344-00 tx

22 Shooter Lane 8 - CN10 2 GRY WHT 7 BLK GRN Playeld Rollover 8-SW-28 180-5157-01 23

24 (A)EROSMITH Target 8 - CN11 2 LGN BLK 11-12 BLK ORG Playeld Leaf, Target 8-SW-26 515-9783-00-00 25 A(E)ROSMITH Target 8 - CN11 9 LGN GRY 11-12 BLK ORG Playeld Leaf, Target 8-SW-22 515-9783-00-00 26 AE(R)OSMITH Target 8 - CN11 8 LGN WHT 11-12 BLK ORG Playeld Leaf, Target 8-SW-23 515-9783-00-00

27 28 Left Scoop 8 - CN12 2 WHT BRN 10 BLK RED Playeld Micro 8-SW-8 180-5209-00 29 Toy Box Enter 1 9 - CN13 2 WHT RED 10 BLK GRY Playeld Opto 9-SW-0 520-7036-01 tx

30 Toy Box Enter 2 9 - CN13 3 WHT ORG 10 BLK GRY Playeld Opto 9-SW-1 520-7036-01 tx

31 Toy Box Enter 3 9 - CN13 4 WHT YEL 10 BLK GRY Playeld Opto 9-SW-2 520-7036-01 tx

32 Toy Box Lid 9 - CN13 5 WHT GRN 10 BLK GRY Playeld Micro 9-SW-3 180-5119-02 33 AEROSMIT(H) Target 8 - CN12 6 WHT GRN 10 BLK RED Playeld Leaf, Target 8-SW-12 515-9783-00-00

34 AEROSMI(T)H Target 8 - CN12 7 WHT BLU 10 BLK RED Playeld Leaf, Target 8-SW-13 515-9783-00-00 35 AEROSM(I)TH Target 8 - CN12 8 WHT VIO 10 BLK RED Playeld Leaf, Target 8-SW-14 515-9783-00-00 36 AEROS(M)ITH Target 8 - CN12 9 WHT GRY 10 BLK RED Playeld Leaf, Target 8-SW-15 515-9783-00-00

37 38 Spinner 8 - CN13 2 PNK BLK 10 BLK BRN Playeld Micro 8-SW-0 180-5010-04 39 Motor Home 8 - CN13 3 PNK BRN 10 BLK BRN Playeld Micro 8-SW-1 180-5010-04

40 Motor Away 8 - CN13 4 PNK RED 10 BLK BRN Playeld Micro 8-SW-2 180-5010-04 41 Top Scoop 8 - CN13 5 PNK ORG 10 BLK BRN Playeld Micro 8-SW-3 180-5209-00 42 43 U/P Left Orbit 10 - CN15 2 TAN BLK 14 BLK WHT UP Playeld Rollover 10-SW-4 500-9935-04 44 U/P Right Orbit 10 - CN15 3 TAN RED 14 BLK WHT UP Playeld Rollover 10-SW-5 500-9935-03 45 Left Pop Bumper 9 - CN10 2 GRY BLK 7-9 BLK YEL Playeld Leaf 9-SW-28 180-5232-00 46 Right Pop Bumper 9 - CN10 3 GRY BRN 7-9 BLK YEL Playeld Leaf 9-SW-29 180-5232-00 47 Top Pop Bumper 9 - CN10 4 GRY RED 7-9 BLK YEL Playeld Leaf 9-SW-30 180-5232-00 48 49 AER(O)SMITH Target 9 - CN11 4 TAN ORG 11-12 BLK BLU Playeld Leaf, Target 9-SW-17 515-9785-00-00 50 AERO(S)MITH Target 9 - CN11 5 TAN YEL 11-12 BLK BLU Playeld Leaf, Target 9-SW-18 515-9785-00-00 51 52 Left Orbit 9 - CN10 5 53 Left Ramp Exit 9 - CN11 8 TAN VIO 11-12 BLK BLU Playeld Micro 9-SW-21 180-5087-00 54 55 Center Drop Target 10 - CN15 9 TAN WHT 14 BLK WHT Playeld Opto 10-SW-11 520-5252-01 56 Toy Box Hit 9 - CN10 6 GRY 7-9 BLK YEL Playeld Opto 9-SW-16 515-0215-00 tx

57 Toy Box Target-Left 9 - CN11 2 TAN BLK 11-12 BLK BLU Playeld Leaf, Target 9-SW-26 515-9785-00-00 58 Toy Box Target-Right 9 - CN11 3 TAN RED 11-12 BLK BLU Playeld Leaf, Target 9-SW-27 515-9785-00-00 59 60 U/P Exit 10 - CN15 10 TAN 14 BLK WHT Playeld Rollover 10-SW-12 500-9935-04 61 Right Eject 9 - CN11 6 TAN GRN 11-12 BLK BLU Playeld Micro 9-SW-19 180-5186-01 62 Right Orbit 9 - CN11 7 TAN BLU 11-12 BLK BLU Playeld Rollover 9-SW-20 500-9935-03

Ext

Conn. Input

Input Wire GND

GRY ORG 7-9 BLK YEL Playeld Rollover 9-SW-31 500-9935-04

Ground Wire

Location Type Address Part Number

520-7001-00 rx

520-7037-01 rx

515-0215-01 rx

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Continued on next page...

SWITCH REFERENCE CONTINUED

SPIKE SYSTEM AND NODE GUIDE

Figure 3.3.1. Playeld switch locations (top view).

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Continued on next page...

SPIKE SYSTEM AND NODE GUIDE

SWITCH REFERENCE CONTINUED

ID Name Node Node

63 Right Ramp Enter 8 - CN12 3 WHT RED 10 BLK RED Playeld Opto 8-SW-9 515-0215-00 tx

64 U/P Target 1 (L) 10 - CN15 4 TAN ORG 14 BLK WHT UP Playeld Leaf, Target 10-SW-6 515-9783-00-02 65 U/P Target 2 10 - CN15 5 TAN YEL 14 BLK WHT UP Playeld Leaf, Target 10-SW-7 515-9783-00-02 66 U/P Target 3 10 - CN15 6 TAN GRN 14 BLK WHT UP Playeld Leaf, Target 10-SW-8 515-9783-00-02 67 U/P Target 4 10 - CN15 7 TAN BLU 14 BLK WHT UP Playeld Leaf, Target 10-SW-9 515-9783-00-02 68 U/P Target 5 (R) 10 - CN15 8 TAN VIO 14 BLK WHT UP Playeld Leaf, Target 10-SW-10 515-9783-00-02 69 70 Lockdown Button 1 - CN7 8 TAN WHT 5 BLK WHT Cabinet Leaf 1-SW-2 180-5218-00 71

72 73 Start Button 1 - CN6 10 GRY 5 BLK WHT Cabinet Micro 1-SW-11 180-5174-00

74 Tournament Start Button 1 - CN6 9 GRY WHT 5 BLK WHT Cabinet Micro 1-SW-12 180-5174-00 75 76 Left Coin 1 - CN5 9 PNK BRN 3 BLK Cabinet Micro 1-SW-16 180-5204-00

77 Right Coin 1 - CN5 7 PNK ORG 3 BLK Cabinet Micro 1-SW-18 180-5204-00 78 Center Coin 1 - CN5 8 PNK RED 3 BLK Cabinet Micro 1-SW-17 79 Fourth Coin 1 - CN5 6 - Cabinet - 1-SW-19

80 Fifth Coin 1 - CN5 5 - Cabinet - 1-SW-20 81 Tilt Pendulum 1 - CN6 7 WHT 5 BLK WHT Cabinet Plumb Bob 1-SW-14 516-0007-00

82 Sixth Coin 1 - CN9 5 - Cabinet - 1-SW-21 83 Ticket Notch 1 - CN11 5 - Cabinet - 1-SW-8

84 Slam Tilt 1 - CN5 4 LGN RED 3 BLK Cabinet - 1-SW-22 85 86

87 88 89

92 93

C1 DIP 1 0 - - - - CPU Node 0-SW-0 C10 Service Plus 0 - CN25 3 LGN VIO 6 BLK Coin Door 0-SW-9 180-5192-02 C11 Service Minus 0 - CN25 2 LGN BLU 6 BLK Coin Door 0-SW-10 180-5192-02 C12 Service Back 0 - CN25 1 LGN BLK 6 BLK Coin Door 0-SW-11 180-5192-00 C24 DC Sense 0 - CN7 4 GRY RED 1 BLK - 0-SW-23 C17 Headphone Detect 0 - - - - - - Coin Door 0-SW-16 C18 Headphone Kit Cable

Detect C19 Volume Encoder 1 0 - CN3 6 WHT 1 DRAIN CPU Node 0-SW-18 C20 Volume Encoder 2 0 - CN3 7 GRN 1 DRAIN CPU Node 0-SW-19 C2 DIP 2 0 - - - - CPU Node 0-SW-1 C3 DIP 3 0 - - - - CPU Node 0-SW-2 C4 DIP 4 0 - - - - C5 DIP 5 0 - - - - CPU Node 0-SW-4 C6 DIP 6 0 - - - - CPU Node 0-SW-5 C7 DIP 7 0 - - - - CPU Node 0-SW-6 C8 DIP 8 0 - - - - CPU Node 0-SW-7 C9 Service Select 0 - CN25 4 LGN GRY 6 BLK Coin Door 0-SW-8 180-5192-04

0 - CN3 5 BLK 4 BLK CPU Node 0-SW-17 -

Ext

Conn. Input

Input Wire GND

Ground Wire

Location Type Address Part Number

515-0215-01 rx

CPU Node 0-SW-3 -

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPIKE SYSTEM AND NODE GUIDE

3.4 LIGHT REFERENCE

ID Name Node Node

1 Coin Enable 1 - CN8 6 BLK GRY 2 GRY RED Coin Door Digital Out 1-LP-0 2 Start Button 1 - CN6 3 YEL BRN 1 RED Cabinet Feature White 1-LP-2 112-5033-08 3 Tournament Start 1 - CN6 2 YEL RED 1 RED Cabinet Feature White 1-LP-3 112-5033-08

4 Lockdown Button-RED 1 - CN7 2 RED WHT 1 RED Cabinet Feature RGB 1-LP-5 520-5333-00 5 Lockdown Button-GRN 1 - CN7 3 GRN WHT 1 RED Cabinet Feature RGB 1-LP-4 520-5333-00 6 Lockdown Button-BLU 1 - CN7 4 BLU WHT 1 RED Cabinet Feature RGB 1-LP-7 520-5333-00

7 8 9

10 11 Left Outlane 8 - CN14 6 ORG RED 7-8 YEL Playeld Feature White 8-LP-3 520-5307-00 12 13 14 Shoot Again 8 8b CN5 4 ORG WHT 1 RED Playeld Feature White 8-LP-19 520-5307-00 15 Last Child 8 8b - LED9 - - - Playeld Feature White 8-LP-16 520-7004-00 16 Walk This Way 8 8b - LED7 - - - Playeld Feature White 8-LP-14 520-7004-00 17 Same Old Song N Dance 8 8b - LED8 - - - Playeld Feature White 8-LP-15 520-7004-00 18 Sweet Emotion 8 8b - LED6 - - - Playeld Feature White 8-LP-13 520-7004-00 19 Dude Looks Like A Lady 8 8b - LED4 - - - Playeld Feature White 8-LP-11 520-7004-00 20 Back In The Saddle 8 8b - LED5 - - - Playeld Feature White 8-LP-12 520-7004-00 21 Rats In The Cellar 8 8b - LED3 - - - Playeld Feature White 8-LP-10 520-7004-00

22 Toys In The Attic 8 8b - LED1 - - - Playeld Feature White 8-LP-8 520-7004-00 23 Love In An Elevator-RED 8 8b - LED14 - - - Playeld Feature RGB 8-LP-23 520-7004-00

24 Love In An Elevator-GRN 8 8b - LED14 - - - Playeld Feature RGB 8-LP-22 520-7004-00 25 Love In An Elevator-BLU 8 8b - LED14 - - - Playeld Feature RGB 8-LP-21 520-7004-00 26

27 Right Outlane 8 - CN14 3 ORG BLU 7-8 YEL Playeld Feature White 8-LP-6 520-5307-00 28 29 (A)EROSMITH 8 8d - LED5 - - - Playeld Feature White 8-LP-38 520-7005-00

30 A(E)ROSMITH 8 8d - LED4 - - - Playeld Feature White 8-LP-37 520-7005-00 31 AE(R)OSMITH 8 8d - LED3 - - - Playeld Feature White 8-LP-36 520-7005-00

32 Left Scoop X 8 8d - LED8 - - - Playeld Feature White 8-LP-41 520-7005-00 33 Extra Ball 8 8d - LED7 - - - Playeld Feature White 8-LP-40 520-7005-00

34 Left Scoop-3 8 8d - LED6 - - - Playeld Feature White 8-LP-39 520-7005-00 35 Left Scoop Arrow-RED 8 8d - LED1 - - - Playeld Feature RGB 36 Left Scoop Arrow-GRN 8 8d - LED1 - - - Playeld Feature RGB 8-LP-33 520-7005-00

37 Left Scoop Arrow-BLU 8 8d - LED1 - - - Playeld Feature RGB 8-LP-32 520-7005-00 38 Left Scoop-Rect 8 8d - LED2 - - - Playeld Feature White 8-LP-35 520-7005-00 39 Bilboard-1 8 8d CN3 3 BRN GRN 1 RED Playeld Feature White 8-LP-44 520-5307-00

40 Bilboard-2 8 8d CN3 4 BRN BLU 1 RED Playeld Feature White 8-LP-45 520-5307-00 41 42 AEROSMIT(H) 8 8c - LED1 - - - Playeld Feature White 8-LP-24 520-7006-00 43 AEROSMI(T)H 8 8c - LED2 - - - Playeld Feature White 8-LP-25 520-7006-00 44 AEROSM(I)TH 8 8c - LED3 - - - Playeld Feature White 8-LP-26 520-7006-00 45 AEROS(M)ITH 8 8c - LED4 - - - Playeld Feature White 8-LP-27 520-7006-00 46 Right Ramp X 8 8c CN3 3 GRN YEL 1 RED Playeld Feature White 8-LP-30 520-5307-00 47 48 UP-Arrow-RED 10 10a CN3 2 RED WHT 1 RED Playeld Feature RGB 10-LP-37 520-5333-00 49 UP-Arrow-GRN 10 10a CN3 3 GRN WHT 1 RED Playeld Feature RGB 10-LP-38 520-5333-00 50 UP-Arrow-BLU 10 10a CN3 4 BLU WHT 1 RED Playeld Feature RGB 10-LP-39 520-5333-00 51 52 Left Pop Bumper-RED 9 9a CN3 4 RED BLK 1 RED Playeld Feature RGB 9-LP-42 520-6971-00

Ext.

Conn. Ret.

Ret. Wire Src.

Src. Wire Location Type Light

Color

Address Part Number

8-LP-34 520-7005-00

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Continued on next page...

SPIKE SYSTEM AND NODE GUIDE

LIGHT REFERENCE CONTINUED

ID Name Node Node

53 Left Pop Bumper-GRN 9 9a CN3 3 GRN BLK 1 RED Playeld Feature RGB 9-LP-41 520-6971-00 54 Left Pop Bumper-BLU 9 9a CN3 2 BLU BLK 1 RED Playeld Feature RGB 9-LP-40 520-6971-00 55 Right Pop Bumper-RED 9 9a CN3 7 RED BRN 1 RED Playeld Feature RGB 9-LP-45 520-6971-00 56 Right Pop Bumper-GRN 9 9a CN3 6 GRN BRN 1 RED Playeld Feature RGB 9-LP-44 520-6971-00 57 Right Pop Bumper-BLU 9 9a CN3 5 BLU BRN 1 RED Playeld Feature RGB 9-LP-43 520-6971-00 58 Top Pop Bumper-RED 9 9a CN3 10 RED WHT 1 RED Playeld Feature RGB 9-LP-48 520-6971-00 59 Top Pop Bumper-GRN 9 9a CN3 9 GRN RED 1 RED Playeld Feature RGB 9-LP-47 520-6971-00 60 Top Pop Bumper-BLU 9 9a CN3 8 BLU RED 1 RED Playeld Feature RGB 9-LP-46 520-6971-00 61 62 Left Orbit Arrow-RED 9 9a CN4 7 RED ORG 1 RED Playeld Feature RGB 9-LP-54 520-5333-00 63 Left Orbit Arrow-GRN 9 9a CN4 6 GRN ORG 1 RED Playeld Feature RGB 9-LP-53 520-5333-00 64 Left Orbit Arrow-BLU 9 9a CN4 5 BLU ORG 1 RED Playeld Feature RGB 9-LP-52 520-5333-00 65 Left Orbit-Elevator 8 8b CN7 LED2 ORG RED 1 RED Playeld Feature White 8-LP-9 520-5307-00 66 67 Left Orbit X 9 9a CN4 3 BRN 1 RED Playeld Feature White 9-LP-50 520-5307-00 68 69 AER(O)SMITH 9 9a - LED1 - - - Playeld Feature White 9-LP-8 520-7007-00 70 AERO(S)MITH 9 9a - LED2 - - - Playeld Feature White 9-LP-9 520-7007-00 71

72 Toy Box Target-Left 9 9a CN4 2 BRN BLK 1 RED Playeld Feature White 9-LP-49 520-5307-00 73 Toy Box Target-Right 9 9a - LED15 - - - Playeld Feature White 9-LP-22 520-7007-00

74 75 Lock 1 9 9a - LED10 - - - Playeld Feature White 9-LP-17 520-7007-00 76 Lock 2 9 9a - LED11 - - - Playeld Feature White 9-LP-18 520-7007-00

77 Lock 3 9 9a - LED12 - - - Playeld Feature White 9-LP-19 520-7007-00 78 Lock 4 9 9a - LED13 - - - Playeld Feature White 9-LP-20 520-7007-00 79 Lock 5 9 9a - LED14 - - - Playeld Feature White 9-LP-21 520-7007-00

80 Lock 6 9 9a - LED9 - - - Playeld Feature White 9-LP-16 520-7007-00 81 Toy Box Arrow-RED 9 9a - LED19 - - - Playeld Feature RGB 9-LP-32 520-7007-00

82 Toy Box Arrow-GRN 9 9a - LED19 - - - Playeld Feature RGB 9-LP-31 520-7007-00 83 Toy Box Arrow-BLU 9 9a - LED19 - - - Playeld Feature RGB 9-LP-30 520-7007-00

84 Toy Box X 9 9a - LED3 - - - Playeld Feature White 9-LP-10 85 86 Left Ramp Arrow-RED 9 9a - LED21 - - - Playeld Feature RGB 9-LP-38 520-7007-00

87 Left Ramp Arrow-GRN 9 9a - LED21 - - - Playeld Feature RGB 9-LP-37 520-7007-00 88 Left Ramp Arrow-BLU 9 9a - LED21 - - - Playeld Feature RGB 9-LP-36 520-7007-00 89 Left Ramp X 9 9a - LED8 - - - Playeld Feature White 9-LP-15 520-7007-00

90 91 Top Scoop Arrow-RED 9 9a - LED20 - - - Playeld Feature RGB 9-LP-35 520-7007-00

92 Top Scoop Arrow-GRN 9 9a - LED20 - - - Playeld Feature RGB 9-LP-34 520-7007-00 93 Top Scoop Arrow-BLU 9 9a - LED20 - - - Playeld Feature RGB 9-LP-33 520-7007-00

94 Top Scoop-Rect 9 9a - LED7 - - - Playeld Feature White 9-LP-14 520-7007-00 95 Top Scoop X 9 9a - LED6 - - - Playeld Feature White 9-LP-13 520-7007-00 96

97 Right Eject Arrow-RED 9 9a - LED18 - - - Playeld Feature RGB 9-LP-29 520-7007-00 98 Right Eject Arrow-GRN 9 9a - LED18 - - - Playeld Feature RGB 9-LP-28 520-7007-00 99 Right Eject Arrow-BLU 9 9a - LED18 - - - Playeld Feature RGB 9-LP-27 520-7007-00

100 R Eject-2 9 9a - LED5 - - - Playeld Feature White 9-LP-12 520-7007-00 101 Right Eject X 9 9a - LED4 - - - Playeld Feature White 9-LP-11 520-7007-00 102 103 Right Ramp Arrow-RED 9 9a - LED17 - - - Playeld Feature RGB 9-LP-26 520-7007-00 104 Right Ramp Arrow-GRN 9 9a - LED17 - - - Playeld Feature RGB 9-LP-25 520-7007-00

Ext.

Conn. Ret.

Ret. Wire Src.

Src. Wire Location Type Light

Color

Address Part Number

520-7007-00

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Continued on next page...

LIGHT REFERENCE CONTINUED

SPIKE SYSTEM AND NODE GUIDE

Figure 3.4.1. Playeld light locations (top view).

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Continued on next page...

SPIKE SYSTEM AND NODE GUIDE

LIGHT REFERENCE CONTINUED

ID Name Node Node

105 Right Ramp Arrow-BLU 9 9a - LED17 - - - Playeld Feature RGB 9-LP-24 520-7007-00 106 107 Right Orbit Arrow-RED 9 - CN14 6 RED YEL 7-8 YEL Playeld Feature RGB 9-LP-3 520-5333-00 108 Right Orbit Arrow-GRN 9 - CN14 5 GRN YEL 7-8 YEL Playeld Feature RGB 9-LP-4 520-5333-00 109 Right Orbit Arrow-BLU 9 - CN14 4 BLU YEL 7-8 YEL Playeld Feature RGB 9-LP-5 520-5333-00 110 Right Orbit-Elevator 8 8b CN7 5 ORG YEL 2 RED Playeld Feature White 8-LP-20 520-5307-00 111 112 Right Orbit X 9 - CN14 2 BRN ORG 7-8 YEL Playeld Feature White 9-LP-7 520-5307-00 113 114 U/P Target 1 (L)-RED 10 10a - LED1 - 1 RED Playeld Feature RGB 10-LP-18 520-7015-00 115 U/P Target 1 (L)-GRN 10 10a - LED1 - 1 RED Playeld Feature RGB 10-LP-17 520-7015-00 116 U/P Target 1 (L)-BLU 10 10a - LED1 - 1 RED Playeld Feature RGB 10-LP-16 520-7015-00 117 U/P Target 2-RED 10 10a - LED9 - 1 RED Playeld Feature RGB 10-LP-30 520-7015-00 118 U/P Target 2-GRN 10 10a - LED9 - 1 RED Playeld Feature RGB 10-LP-29 520-7015-00 119 U/P Target 2-BLU 10 10a - LED9 - 1 RED Playeld Feature RGB 10-LP-28 520-7015-00 120 U/P Target 3-RED 10 10a - LED8 - 1 RED Playeld Feature RGB 10-LP-27 520-7015-00 121 U/P Target 3-GRN 10 10a - LED8 - 1 RED Playeld Feature RGB 10-LP-26 520-7015-00 122 U/P Target 3-BLU 10 10a - LED8 - 1 RED Playeld Feature RGB 10-LP-25 520-7015-00 123 U/P Target 4-RED 10 10a - LED10 - 1 RED Playeld Feature RGB 10-LP-33 520-7015-00 124 U/P Target 4-GRN 10 10a - LED10 - 1 RED Playeld Feature RGB 10-LP-32 520-7015-00 125 U/P Target 4-BLU 10 10a - LED10 - 1 RED Playeld Feature RGB 10-LP-31 520-7015-00 126 U/P Target 5 (R)-RED 10 10a - LED11 - 1 RED Playeld Feature RGB 10-LP-36 520-7015-00 127 U/P Target 5 (R)-GRN 10 10a - LED11 - 1 RED Playeld Feature RGB 10-LP-35 520-7015-00 128 U/P Target 5 (R)-BLU 10 10a - LED11 - 1 RED Playeld Feature RGB 10-LP-34 520-7015-00 129 130 Coin Door GI 1 - CN5 2 YEL 1 YEL-WHT Coin Door G.I. White 1-LP-1 112-5033-08 131 Playeld GI-1 8 - CN15 5 WHT BLK 1 YEL BLK Playeld G.I. White 8-LP-0 112-5034-08 132 Playeld GI-2 8 - CN15 6 RED BLK 2 YEL RED Playeld G.I. White 8-LP-1 112-5034-02 133 Playeld GI-3 9 - CN15 5 BLU BLK 1 YEL BLU Playeld G.I. White 9-LP-0 112-5034-05 134 GI-Backpanel 9 - CN15 6 GRN BLK 2 YEL GRN Backpanel G.I. White 9-LP-1 112-5034-xx 135 GI-Upper Playeld 10 - CN13 1 WHT BLK 3 YEL BLK Playeld G.I. White 10-LP-0 112-5034-08 136 137 Left Sling Flash 8 8b CN4 3 ORG 1 RED Playeld Flash White 8-LP-18 520-7000-00 138 Right Sling Flash 8 8b CN2 3 ORG 1 RED Playeld Flash White 8-LP-17 520-7000-00 139 Lower Left Flash 8 8d CN4 3 ORG GRN 1 RED Playeld Flash White 8-LP-43 520-7000-00 140 Left Scoop Flash 8 8d CN2 3 ORG BRN 1 RED Playeld Flash White 8-LP-42 113-5045-08 141 Right Orbit Flash 8 8c - LED5 - - - Playeld Flash White 8-LP-28 520-7006-00 142 Spinner Flash 8 8c CN2 3 ORG BLK 1 RED Playeld Flash White 8-LP-29 113-5045-08 143 Right Ramp Flash 8 8c CN3 4 ORG GRY 1 RED Playeld Flash White 8-LP-31 520-7000-00 144 Pop Bumpers Flash 9 9a CN4 8 YEL BRN 1 RED Playeld Flash White 9-LP-55 520-7000-00 145 Toy Box Lid Flash 9 9a CN5 2 YEL ORG 1 RED Playeld Flash White 9-LP-56 113-5045-08 146 Toy Box Enter Flash (x2) 9 9a CN5 3 YEL VIO 1 RED Playeld Flash White 9-LP-57 113-5045-08 147 Toy Box Flash (x2) 9 9a - LED22 - - - Playeld Flash White 9-LP-39 520-7007-00 148 149 Left Ramp Flash 9 9a - LED16 - - - Playeld Flash White 9-LP-23 520-7007-00 150 L Orbit-Rect 9 9a CN4 4 BRN RED 1 RED Playeld Flash White 9-LP-51 113-5045-08 151 R Orbit-Rect 9 - CN14 3 BRN YEL 7-8 YEL Playeld Flash White 9-LP-6 113-5045-08 152 Left Return Lane-Left 8 - CN14 5 ORG 7-8 YEL Playeld Flash White 8-LP-4 113-5045-08 153 Left Return Lane-Right 8 - CN14 2 ORG VIO 7-8 YEL Playeld Flash White 8-LP-7 113-5045-08 154 Right Return Lane 8 - CN14 4 ORG YEL 7-8 YEL Playeld Flash White 8-LP-5 113-5045-08 155 U/P Flash 1 10 10a CN5 3 YEL BRN 1 RED Playeld Flash White 10-LP-24 520-7000-00 156 U/P Flash 2 10 10a CN5 4 YEL RED 1 RED Playeld Flash White 10-LP-23 520-7000-00

Ext.

Conn. Ret.

Ret. Wire Src.

Src. Wire Location Type Light

Color

Address Part Number

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

Continued on next page...

SPIKE SYSTEM AND NODE GUIDE

LIGHT REFERENCE CONTINUED

ID Name Node Node

157 U/P Flash 3 10 10a CN5 5 YEL ORG 1 RED Playeld Flash White 10-LP-22 520-7000-00 158 U/P Flash 4 10 10a CN5 6 YEL GRN 1 RED Playeld Flash White 10-LP-21 520-7000-00 159 U/P Flash 5 10 10a CN5 7 YEL BLU 1 RED Playeld Flash White 10-LP-20 520-7000-00 160 U/P Elevator Flash 10 10a CN5 8 YEL VIO 1 RED Playeld Flash White 10-LP-19 520-7000-00 161 Upper Left Ramp Flash 9 - CN15 7 BRN WHT 3 YEL Playeld Flash White 9-LP-2 520-7000-00

Ext.

Conn. Ret.

Ret. Wire Src.

Src. Wire Location Type Light

Color

Address Part Number

3.5 MOTOR REFERENCE

ID Name Node Node

1 Motor A Enable 8 8e CN1 - - - - Playeld Motor - 8-LP-48 520-6996-00 2 Motor A Control 1A 8 8e CN1 - - - - Playeld Motor - 8-LP-49 520-6996-00 3 Motor A Control 2A 8 8e CN1 - - - - Playeld Motor - 8-LP-50 520-6996-00

4 5 6

7 8

Ext.

Conn. Ret.

Ret. Wire

Src. Pin

Src.

Location Type Light

Wire

Address Part Number CODE_ID

Color

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

4. ELECTRONIC PINOUTS AND SCHEMATICS

4.1 SPIKE-2 CPU NODE 0

509-1000-00

DIRECT SWITCH MAPPING (CN25)

The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and Cabinet nodes are required for diagnostic switch operation.

ID Name Conn. Input

C1 DIP 1 - - - - - CPU Node 0-SW-0 C2 DIP 2 - - - - - CPU Node 0-SW-2 C3 DIP 3 - - - - - CPU Node 0-SW-3 C4 DIP 4 - - - - - CPU Node 0-SW-4 C5 DIP 5 - - - - - CPU Node 0-SW-5 C6 DIP 6 - - - - - CPU Node 0-SW-6 C7 DIP 7 - - - - - CPU Node 0-SW-7 C8 DIP 8 - - - - - CPU Node 0-SW-8 C9 Service Select CN25 1 LGN-GRY 11 BLK-WHT Coin Door 0-SW-9 180-5192-04 C10 Service Plus CN25 2 LGN-VIO 11 BLK-WHT Coin Door 0-SW-10 180-5192-02 C11 Service Minus CN25 3 LGN-BLU 11 BLK-WHT Coin Door 0-SW-11 180-5192-02 C12 Service Back CN25 4 LGN-BLK 11 BLK-WHT Coin Door 0-SW-12 180-5192-00 C16 Playeld Power

Interlock

CN7 4 GRY 5 GRY-RED Cabinet Interlock 0-SW-16 180-5136-00

CONNECTORS

ID Connector Type Description

CN1 5-Pin .156” Header Backbox 2-channel amplied speaker out CN3 RJ45 SPIKE node bus - to cabinet node N1 CN4 2-Pin .156” Cabinet 1-channel amplied speaker out CN7 5-Pin .156” Header 48V supply from main power supply CN18 3.5mm Stereo TRS jack Headphone Jack CN20 USB USB connector - for software updates,

CN21 USB USB connector - for software updates,

CN22 RJ45 SPIKE node bus - to playeld node, N8 CN23 14-Pin .100” Header Dot matrix display connector CN24 4-Pin .156” Header 5V DC and ground out to the LED display CN25 12-Pin .100” Header Dedicated switch inputs - service, volume

audit dumps, and expansion modules

switches

COMPONENTS

ID Name

S1 Reset Switch S2 DIP Switches SD CARD For system SD card. Note: only to be removed if instructed to by

BT1 CR232 3V Lithium battery for game clock between power cycles

Stern Service.

Input Wire GND

Ground Wire Location Type Address Part Number

STATUS LEDS

LED ID Name Color Description

48V +48V Supply In Red ON: Main system power is

connected, OFF: No 48V system power. Check power supply connections, cables, and fuses.

24V +24V Audio Power Red ON: Audio power supply is good,

OFF: Audio power supply off, call tech support.

9V +9V Node Bus Power Red ON: Node bus power supply is

good, OFF: Node bus power supply bad, call tech support.

5V Red ON: Logic power supply is good.

OFF: Logic power supply bad, call

tech support. TxD Node bus transmit Red Node bus transmit activity RxD Node bus receive Red Node bus receive activity Status System status Red Constant double blink - game

software running Netstat Network status Red Communication bridge activity

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPIKE-2 CPU NODE 0 CONTINUED

AUDIO PINOUTS

ID Type Pin Description Minimum

CN18 TRS 3.5mm

Headphone Jack

CN1 .156" 5-pin

Header

CN4 .156" 2-pin

Header

CN27 .100" 3-pin

header

Tip Headphone Left 8 Ohms 200mW Ring Headphone Right 8 Ohms 200mW Sleeve Audio Ground - 1 Speaker Right Ground (-) 4 Ohms -

2 Speaker Right (+) 4 Ohms 20W 3 n/c - -

4 Speaker Left Ground (-) 4 Ohms 5 Speaker Left (+) 4 Ohms 20W 1 Woofer Ground (-) 8 Ohms 2 Woofer Out (+) 8 Ohms 40W 1 Line Out Left (+) 600 Ohms -

2 Line Out Ground - - 3 Line Out Right (-) 600 Ohms -

Impedance

COUNTRY CODES (DIP S2)

Max Power (RMS)

ELECTRONIC PINOUTS AND SCHEMATICS

Figure 4.1.1. SPIKE 2 CPU Node connector detail.

COIN DOOR SERVICE SWITCH WIRING

DIP S2

Country 1 2 3 4 5 6 7 8

USA OFF OFF OFF OFF OFF OFF OFF OFF Austria ON OFF OFF OFF OFF OFF OFF OFF Australia ON OFF ON ON OFF OFF OFF OFF Belgium OFF ON OFF OFF OFF OFF OFF OFF Canada 1 ON ON OFF OFF OFF OFF OFF OFF Canada 2 OFF ON OFF ON ON OFF OFF OFF Croatia OFF ON ON OFF ON OFF OFF OFF Denmark ON OFF OFF ON OFF OFF OFF OFF Finland ON OFF ON OFF OFF OFF OFF OFF France OFF ON ON OFF OFF OFF OFF OFF Germany ON ON ON OFF OFF OFF OFF OFF Greece ON ON ON ON OFF OFF OFF OFF Italy OFF OFF OFF ON OFF OFF OFF OFF Japan ON OFF ON OFF ON OFF OFF OFF Middle East ON ON ON OFF ON OFF OFF OFF Netherlands OFF OFF ON OFF OFF OFF OFF OFF New Zealand OFF OFF OFF OFF ON OFF OFF OFF Norway OFF ON OFF ON OFF OFF OFF OFF Portugal ON OFF OFF OFF OFF ON OFF OFF Russia ON OFF OFF ON ON OFF OFF OFF S. Africa OFF OFF ON OFF ON OFF OFF OFF Spain OFF ON OFF OFF ON OFF OFF OFF Sweden ON ON OFF ON OFF OFF OFF OFF Switzerland OFF OFF ON ON OFF OFF OFF OFF Taiwan OFF OFF OFF ON ON OFF OFF OFF United Kingdom OFF ON ON ON OFF OFF OFF OFF

Figure 4.1.2. Service switch wiring. Note that the Cabinet Node must be present and CN10 and CN12 connected for the Coin Door Service Switches to function correctly.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

4.2 CABINET NODE 1

520-6967-72

ID Type Pin Description Wire Color

CN1 .100" 8-Pin Header

Universal Card Link

CN2 .100" 5-Pin Header Low

Ticket

CN3 .100" 3-Pin Header

Meter 1

CN4 .100" 3-Pin Header

Meter 2

CN5 .100" 9-Pin Header 1 5V Out YEL/WHT

CN6 .100" 14-Pin Header

Cabinet Left

CN7 .100" 12-Pin Header

Cabinet Right

1 12V -

2 Coin 1 -

3 Meter 1 -

4 N/C -

5 Notch -

6 Coin Enable -

7 Ticket Enable -

8 Ground -

1 Ground -

2 Ticket Low sw. -

3 Key -

4 Ticket Low -

5 5V Out -

1 Meter 12V (+) RED

2 Meter (-) BLK

3 N/C -

1 Meter 12V (+) RED

2 Meter (-) BLK

3 N/C -

2 Coin LED Out YEL

3 Ground BLK

4 Slam Tilt In LGN/RED

5 Coin 5 PNK/GRN*

6 Coin 4 PNK/YEL*

7 Coin 3 PNK/ORN*

8 Coin 2 PNK/RED*

9 Coin 1 PNK/BRN*

1 5V LED Power RED

2 Start 2 LED YEL-RED

3 Start 1 LED YEL-BRN

4 Spare LED -

5 Ground BLK-WHT

6 Spare Left -

7 Tilt Input WHT

8 Door Open -

9 Start 2 Switch GRY-WHT

10 Start 1 Switch GRY

11 N/C -

12 N/C -

13 N/C -

14 N/C -

1 5V LED Power RED

2 Plunge 2 LED RED-WHT

3 Plunge 1 LED GRN-WHT

4 Spare LED 2 BLU-WHT

5 Ground BLK-WHT

6 Spare Right In -

7 Plunge 2 Switch -

8 Plunge 1 Switch TAN-WHT

9 N/C -

10 N/C -

11 N/C -

12 N/C -

CN9 .100" 6-Pin Header

Dollar Bill Acceptor

CN10 .100" 6-Pin Header

Service Switch In

CN11 .100" 5-Pin Header

Ticket Dispenser

CN12 .100" 10-Pin Header

CPU Direct Switches

CN14 .156" 5-Pin Header

Power Input

CN15 .100" 6-Pin Header

Spare LED's

CN16 .156" 5-Pin Header

Shaker Motor

1 Coin Enable/DBA Inhibit (-) -

2 Coin Enable/DBA Inhibit (+) -

3 Key Key

4 DBA 12V -

5 Coin 6 / DBA Credit -

6 Ground -

1 Service Back (To Coindoor) LGN-BLK

2 Service Down (To Coindoor) LGN-BLU

3 Service Up (To Coindoor) LGN-VIO

4 Service Select (To Coindoor) LGN-GRY

5 Key Key

6 Service Ground (To Coindoor) BLK

1 12V RED

2 N/C -

3 Ticket Dispenser Enable WHT

4 Ground BLK

5 Ticket Dispenser Notch BLU

1 Service Back (To CPU) LGN-BLK

2 Service Down (To CPU) LGN-BLU

3 Service Up (To CPU) LGN-VIO

4 Service Select (To CPU) LGN-GRY

5 Power Present LGN-ORG

6 Service Ground (To CPU) BLK-WHT

7 N/C -

8 N/C -

9 N/C -

10 N/C -

1 Ground BLK

2 Key Key

3 N/C -

4 N/C -

5 48VDC In GRY-YEL

1 5V LED Power -

2 Key Key

3 Spare LED 3 -

4 Spare LED 4 -

5 Spare LED 5 -

6 Spare LED 6 -

1 Shaker Motor (-) BLU

2 Shaker Motor (-) -

3 Shaker Motor (+) -

4 Key Key

5 Shaker Motor (+) RED

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

*Varies by country model

ELECTRONIC PINOUTS AND SCHEMATICS

4.3 LOWER PLAYFIELD 48V DRIVER PINOUT NODE 8

520-7017-72

ID Type Pin Description Wire Color

SW1 Address DIP - Node 8 - OFF-OFF-OFF-OFF -

CN4 RJ45 - SPIKE Node Bus n/a

CN5 RJ45 - SPIKE Node Bus Multi

CN6 .156" 5-Pin Header

Node Power

CN7 .156" 4-Pin Header

(White)

CN8 .156 11-Pin Header

(White)

CN9 .100" 8-Pin Header 1 V+ -

CN10 .100" 9-Pin Header 1 V+ -

1 Ground BLK

2 Key Key

3 N/C -

4 N/C -

5 48VDC In GRY

1 48V Driver Power GRY-ORG

2 8-DR-8 Driver Return YEL-RED

3 8-DR-6 Driver Return YEL-BRN

4 8-DR-7 Driver Return YEL-BLK

1 48V Driver Power GRY-ORG

2 48V Driver Power GRY-ORG

3 48V Driver Power GRY-ORG

4 48V Driver Power GRY-ORG

5 8-DR-0 Driver Return ORG-GRN

6 8-DR-5 Driver Return ORG-YEL

7 8-DR-1 Driver Return ORG-GRY

8 8-DR-8 Driver Return -

9 8-DR-4 Driver Return ORG-WHT

10 8-DR-2 Driver Return ORG-VIO

11 8-DR-3 Driver Return ORG-BLU

2 V+ -

3 8-SW-24 Switch GRY-RED

4 8-SW-25 Switch GRY-BRN

5 8-SW-26 Switch -

6 8-SW-27 Switch VIO

7 Ground BLK-GRN

8 Ground BLK-VIO

2 8-SW-28 Switch GRY-WHT

3 8-SW-29 Switch GRY-VIO

4 8-SW-30 Switch GRY-BLU

5 8-SW-31 Switch GRY-GRN

6 8-SW-16 Switch GRY-YEL

7 Ground BLK-GRN

8 Ground BLK-GRN

9 Ground BLK-GRN

CN11 .100" 12-Pin Header 1 V+ -

2 8-SW-26 Switch LGN-BLK

3 8-SW-27 Switch -

4 8-SW-17 Switch LGN-RED

5 8-SW-18 Switch LGN-ORG

6 8-SW-19 Switch LGN-YEL

7 8-SW-20 Switch LGN-BLU

8 8-SW-21 Switch LGN-VIO

9 8-SW-22 Switch LGN-GRY

10 8-SW-23 Switch LGN-WHT

11 Ground BLK-ORG

12 Ground BLK-ORG

CN12 .100" 10-Pin Head

er(Orange)

CN13 .100" 10-Pin Header 1 V+ RED

CN14 .100" 8-Pin Header 1 Ground -

CN15 .100" 7-Pin Header 1 LED V+ YEL-BLK

CN2 .100" 6-Pin Header,

Node Extension Bus

CN3 .100" 6-Pin Header,

Node Extension Bus

1 V+ RED

2 8-SW-8 Switch WHT-BRN

3 8-SW-9 Switch WHT-RED

4 8-SW-10 Switch -

5 8-SW-11 Switch -

6 8-SW-12 Switch WHT-GRN

7 8-SW-13 Switch WHT-BLU

8 8-SW-14 Switch WHT-VIO

9 8-SW-15 Switch WHT-GRY

10 Ground BLK-RED

2 8-SW-0 Switch PNK-BLK

3 8-SW-1 Switch PNK-BRN

4 8-SW-2 Switch PNK-RED

5 8-SW-3 Switch PNK-ORG

6 8-SW-4 Switch -

7 8-SW-5 Switch -

8 8-SW-6 Switch -

9 8-SW-7 Switch PNK-VIO

10 Ground BLK-BRN

2 8-LP-7 Driver Return ORG-VIO

3 8-LP-6 Driver Return ORG-BLU

4 8-LP-5 Driver Return ORG-YEL

5 8-LP-4 Driver Return ORG

6 8-LP-3 Driver Return ORG-RED

7 LED V+ YEL

8 LED V+ YEL

2 LED V+ YEL-RED

3 LED V+ -

4 - -

5 8-LP-0 GI Return WHT-BLK

6 8-LP-1 GI Return RED-BLK

7 8-LP-2 GI Return -

1 Ground BLK

2 DIN VIO-BLK

3 DOUT VIO-BRN

4 SCK VIO-RED

5 RCK VIO-ORG

6 V+ RED

1 Ground BLK

2 DIN VIO-BLK

3 DOUT VIO-BRN

4 SCK VIO-RED

5 RCK VIO-ORG

6 V+ RED

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

4.4 MID UPPER PLAYFIELD 48V DRIVER PINOUT NODE 9

520-7017-72

ID Type Pin Description Wire Color

SW1 Address DIP - Node 9 - OFF-OFF-ON-OFF -

CN4 RJ45 - SPIKE Node Bus n/a

CN5 RJ45 - SPIKE Node Bus Multi

CN6 .156" 5-Pin Header

Node Power

CN7 .156" 4-Pin Header

(White)

CN8 .156 11-Pin Head

er (White)

CN9 .100" 8-Pin Header 1 V+ -

CN10 .100" 9-Pin Header 1 V+ RED

1 Ground BLK

2 Key Key

3 N/C -

4 N/C -

5 48VDC In GRY

1 48V Driver Power GRY-BRN

2 9-DR-8 Driver Return -

3 9-DR-6 Driver Return ORG

4 9-DR-7 Driver Return YEL-GRN

1 48V Driver Power GRY-BRN

2 48V Driver Power GRY-BRN

3 48V Driver Power GRY-BRN

4 48V Driver Power GRY-BRN

5 9-DR-0 Driver Return BRN-BLK

6 9-DR-5 Driver Return -

7 9-DR-1 Driver Return YEL-ORG

8 9-DR-8 Driver Return -

9 9-DR-4 Driver Return ORG-RED

10 9-DR-2 Driver Return ORG-BLK

11 9-DR-3 Driver Return ORG-BRN

2 V+ -

3 9-SW-24 Switch -

4 9-SW-25 Switch -

5 9-SW-26 Switch -

6 9-SW-27 Switch -

7 Ground -

8 Ground -

2 9-SW-28 Switch GRY-BLK

3 9-SW-29 Switch GRY-BRN

4 9-SW-30 Switch GRY-RED

5 9-SW-31 Switch GRY-ORG

6 9-SW-16 Switch GRY

7 Ground BLK-YEL

8 Ground BLK-YEL

9 Ground BLK-YEL

CN11 .100" 12-Pin

Header

CN12 .100" 10-Pin

Header(Orange)

CN13 .100" 10-Pin

Header

CN14 .100" 8-Pin Header 1 Ground -

CN15 .100" 7-Pin Header 1 LED V+ YEL-BLU

CN2 .100" 6-Pin Head

er, Node Extension Bus

CN3 .100" 6-Pin Head

er, Node Extension Bus

1 V+ -

2 9-SW-26 Switch TAN-BLK

3 9-SW-27 Switch TAN-RED

4 9-SW-17 Switch TAN-ORG

5 9-SW-18 Switch TAN-YEL

6 9-SW-19 Switch TAN-GRN

7 9-SW-20 Switch TAN-BLU

8 9-SW-21 Switch TAN-VIO

9 9-SW-22 Switch -

10 9-SW-23 Switch -

11 Ground BLK-BLU

12 Ground BLK-BLU

1 V+ -

2 9-SW-8 Switch -

3 9-SW-9 Switch -

4 9-SW-10 Switch -

5 9-SW-11 Switch -

6 9-SW-12 Switch -

7 9-SW-13 Switch -

8 9-SW-14 Switch -

9 9-SW-15 Switch -

10 Ground -

1 V+ RED

2 9-SW-0 Switch WHT-RED

3 9-SW-1 Switch WHT-ORG

4 9-SW-2 Switch WHT-YEL

5 9-SW-3 Switch WHT-GRN

6 9-SW-4 Switch -

7 9-SW-5 Switch -

8 9-SW-6 Switch -

9 9-SW-7 Switch -

10 Ground BLK-GRY

2 9-LP-7 Driver Return BRN-ORG

3 9-LP-6 Driver Return BRN-YEL

4 9-LP-5 Driver Return BLU-YEL

5 9-LP-4 Driver Return GRN-YEL

6 9-LP-3 Driver Return RED-YEL

7 LED V+ YEL

8 LED V+ YEL

2 LED V+ YEL-GRN

3 LED V+ YEL

4 - -

5 9-LP-0 GI Return BLU-BLK

6 9-LP-1 GI Return GRN-BLK

7 9-LP-2 GI Return BRN-WHT

1 Ground -

2 DIN -

3 DOUT -

4 SCK -

5 RCK -

6 V+ -

1 Ground BLK

2 DIN VIO-BLK

3 DOUT VIO-BRN

4 SCK VIO-RED

5 RCK VIO-ORG

6 V+ RED

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

4.5 PLAYFIELD 48V 4-DRIVER PINOUT NODE 10

520- 5329-10

CN3

CN2

GREEN ORANGE NEUTRALBLACK

520-5329-10

4 Coil NODE

CN1

CN11 CN9 CN7 CN5

CN14 CN13 CN16 CN15

1 2 3

F1A

125V 7A

CN4

TIME LAG

F1B

ID Type Pin Description Wire Color

SW1 Address DIP - Node 10 - OFF-ON-OFF CN1 - - N/C CN2 RJ45 - SPIKE Node Bus Multi CN3 RJ45 - SPIKE Node Bus Multi CN4 .156" 5-Pin

Header Node Power

1 Ground BLK

2 Key KEY 3 N/C -

4 N/C 5 48VDC In GRY

CN5 .156" 4-Pin

Header (White)

1 Switch Ground -

2 10-SW-0 Switch Return - 3 10-DR-0 Driver Return BLU-BLK

4 48V Driver Power GRY-BLK

CN7 .156" 4-Pin

Header (Black)

1 Switch Ground -

2 10-SW-1 Switch Return - 3 10-DR-1 Driver Return BLU-WHT

4 48V Driver Power GRY-BLK

CN9 .156" 4-Pin

Header (Or ange)

1 Switch Ground -

2 10-SW-2 Switch Return - 3 10-DR-2 Driver Return YEL-WHT

4 48V Driver Power GRY-BLK

CN11 .156" 4-Pin

Header (Green)

1 Switch Ground -

2 10-SW-3 Switch Return - 3 10-DR-3 Driver Return -

4 48V Driver Power -

CN13 .100" 3-Pin

Header

1 10-LP-0 GI Return (1A Max) YEL-BLK

2 GI Ground - 3 LED V+ WHT-BLK

CN14 .100" 6-Pin

Header

1 Ground BLK

2 DIN VIO-BLK 3 DOUT VIO-BRN

4 SCK VIO-RED 5 RCK VIO-ORG 6 V+ RED

CN15 .100" 14-Pin

Header

1 +5V RED

2 10-SW-4 Switch Return TAN-BLK 3 10-SW-5 Switch Return TAN-RED

4 10-SW-6 Switch Return TAN-ORG 5 10-SW-7 Switch Return TAN-YEL 6 10-SW-8 Switch Return TAN-GRN

7 10-SW-9 Switch Return TAN-BLU 8 10-SW-10 Switch Return TAN-VIO 9 10-SW-11 Switch Return TAN-WHT

10 10-SW-12 Switch Return TA N 11 10-SW-13 Switch Return 12 10-SW-14 Switch Return 13 10-SW-15 Switch Return 14 Switch Ground BLK-WHT

CN16 .100" 16-Pin

Header

1 +6V -

2 10-LP-1 Light Return - 3 10-LP-2 Light Return -

4 10-LP-3 Light Return 5 10-LP-4 Light Return 6 10-LP-5 Light Return -

7 10-LP-6 Light Return - 8 10-LP-7 Light Return - 9 10-LP-8 Light Return -

10 10-LP-9 Light Return 11 10-LP-10 Light Return 12 10-LP-11 Light Return 13 10-LP-12 Light Return 14 10-LP-13 Light Return 15 10-LP-14 Light Return 16 10-LP-15 Light Return -

F1 Fuse 7A SB, 125V n/a

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

4.6 FEATURE LED BOARD 8B

520-7004-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 n/c 7 +5 VDC IN RED

CN2 .100" 3-Pin Header 1 +5 VDC RED

2 NC - 3 LP-10 Light Return ORG

CN3 .100" 6-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 V+ RED

CN4 .100" 3-Pin Header 1 +5 VDC RED

2 NC - 3 LP-11 Light Return ORG

CN5 .100" 4-Pin Header 1 +5 VDC RED

2 NC - 3 NC -

4 LP-11 Light Return ORG-WHT

CN7 .100" 5-Pin Header 1 +5 VDC RED

2 +5 VDC RED 3 NC -

4 LP-2 Light Return ORG-RED 5 LP-13 Light Return ORG-YEL

4.7 RIGHT LED BOARD 8C

520-7006-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 n/c 7 +5 VDC IN RED

CN2 .100" 3-Pin Header 1 +5 VDC RED

2 NC - 3 LP-6 Light Return ORG

CN3 .100" 4-Pin Header 1 +5 VDC RED

2 NC - 3 LP-7 Light Return GRN-YEL

4 LP-8 Light Return ORG-GRY

CN4 .100" 6-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 V+ RED

4.8 THROUGH SERIAL OPTO RECEIVER EXTENSION 8A

520-7001-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data -

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 N/C -

7 +5 VDC IN RED

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

4.9 LEFT LED BOARD 8D

520-7005-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 n/c 7 +5 VDC IN RED

CN2 .100" 3-Pin Header 1 +5 VDC RED

2 NC - 3 LP-9 Light Return ORG

CN3 .100" 6-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 V+ RED

CN4 .100" 3-Pin Header 1 +5 VDC RED

2 NC - 3 LP-10 Light Return ORG

CN5 .100" 4-Pin Header 1 V+ RED

2 NC - 3 LP-11 Light Return BRN-GRN

4 LP-12 Light Return BRN-BLU

4.10 SERIAL MOTOR DRIVER BOARD 8E

520-6996-01

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 n/c 7 +5 VDC IN RED

CN2 .156 4-Pin Connector 1 Ground -

2 DRIVE2-A BRN 3 DRIVE1-A GRY

4 V+ -

CN3 .156 3-Pin Connector 1 Ground -

2 DRIVE2-B - 3 DRIVE1-B -

CN4 .100" 6-Pin Header 1 Ground -

2 MISO Output Data - 3 MOSI Input Data -

4 SCK Serial Clock 5 RCK Register Clock 6 V+ -

CN5 .156 5-Pin Connector 1 GND BLK

2 KEY Key 3 N/C -

4 N/C 5 +48 VDC IN GRY

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ELECTRONIC PINOUTS AND SCHEMATICS

LED

+V ADJ.

4.11 CENTER LED BOARD 9A

520-7007-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 n/c 7 +5 VDC IN RED

CN2 .100" 6-Pin Header 1 Ground BLK

2 MISO Output Data VIO-BLK 3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED 5 RCK Register Clock VIO-ORG 6 V+ RED

CN3 .100" 10-Pin Header 1 V+ RED

2 LP-23 Light Return BLU-BLK 3 LP-23 Light Return GRN-BLK

4 LP-23 Light Return RED-BLK 5 LP-24 Light Return BLU-BRN 6 LP-24 Light Return GRN-BRN

7 LP-24 Light Return RED-BRN 8 LP-25 Light Return BLU-RED 9 LP-25 Light Return GRN-RED

10 LP-25 Light Return RED-WHT

CN4 .100" 9-Pin Header 1 V+ RED

2 LP-26 Light Return BRN-BLK 3 LP-27 Light Return BRN

4 LP-28 Light Return BRN-RED 5 LP-29 Light Return BLU-ORG 6 LP-29 Light Return GRN-ORG

7 LP-29 Light Return RED-ORG 8 LP-30 Light Return YEL-BRN

CN5 .100" 4-Pin Header 1 V+ RED

2 LP-31 Light Return YEL-ORG

3 LP-32 Light Return YEL-VIO 4 LP-33 Light Return -

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

4.12 MINI PLAYFIELD LED BOARD 10A

520-7015-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Housing 1 Ground BLK

2 MISO Output Data VIO-BLK

3 MOSI Input Data VIO-BRN

4 SCK Serial Clock VIO-RED

5 RCK Register Clock VIO-ORG

6 n/c -

7 +5 VDC IN RED

CN3 .100" 4-Pin Header 1 +5 VDC RED

2 LP-12 Light Return RED-WHT

3 LP-13 Light Return GRN-WHT

4 LP-14 Light Return BLU-WHT

CN5 .100" 8-Pin Header 1 +5 VDC RED

2 +5 VDC RED

3 LP-7 Light Return YEL-BRN

4 LP-6 Light Return YEL-RED

5 LP-5 Light Return YEL-ORG

6 LP-4 Light Return YEL-GRN

7 LP-3 Light Return YEL-BLU

8 LP-2 Light Return YEL-VIO

4.13 MAIN POWER SUPPLY

011-5003-00

ID Type Pin Description Wire Color

CN1 Screw Terminal 1 AC Line Hot In BLK

2 AC Line Neutral In WHT 3 Earth Ground In GRN

4 DC Ground BLK 5 DC Ground BLK 6 DC Ground BLK

7 +48 V System Power GRY 8 +48 V System Power GRY 9 +48 V System Power GRY

ELECTRONIC PINOUTS AND SCHEMATICS

INTERNATIONAL

ON/OFF SW

NORTH AMERICA

4.14 POWER DISTRIBUTION BOARD

520-5343-01

ID Type Pin Description Wire Color

CN1 .156 in 7-Pin Housing

Plug: 045-5259-07 Pin: 055-5331-00 Key: 060-5013-00

CN2 .093 in 3-Pos Plug

Plug: 045-5003-03 Pin: 055-5013-09

CN3 0.084 in 4-Pos Plug

Plug: 045-5200-04 Pin: 055-5033-08

CN4 0.084 in 6-Pos Plug

Plug: 045-5200-06 Pin: 055-5033-08

CN5 0.084 in 12-Pos Plug

Plug: 045-5200-12 Pin: 055-5033-08

CN6 .156 in 3-Pos

Plug: 045-5259-03 Pin:055-5331-00 (18awg)

CN7 . 084 2-Pos

Plug: 045-5200-02 Pin:055-5033-08

1 +48 VDC IN GRY

2 +48 VDC IN GRY 3 +48 VDC IN GRY

4 Key (n/c) 5 Ground BLK 6 Ground BLK 7 Ground BLK 1 Line In (100-240 VAC) BLK

2 Neutral WHT 3 Earth Ground GRN

1 +48 VDC to CPU Node GRY

2 Door Interlock Switch Status GRY/RED 3 Line Voltage Status VIO

4 Ground BLK 1 Door Interlock Switch +48V -

2 Door Interlock Switch +48V - 3 Switched 48V Out (to Node 1) GRY/YEL

4 Door Interlock Return Ground 5 Door Interlock Return Ground 6 Ground (to Node 1) BLK 1 Switched 48V Node Power GRY

2 Switched 48V Node Power GRY 3 Switched 48V Node Power GRY

4 Switched 48V Node Power GRY 5 Switched 48V Node Power GRY 6 Switched 48V Node Power GRY

7 Node Ground BLK 8 Node Ground BLK 9 Node Ground BLK

10 Node Ground BLK 11 Node Ground BLK 12 Node Ground BLK 1 Ground -

2 Ground - 3 +12VDC -

1 +48 VDC to CPU Node 2 Ground -

4.15 POWER PLUG WIRING

CAUTION

TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO GROUNDING STUD.

REPLACE ALL FUSES WITH CORRECT CURRENT RATINGS!

NORTH AMERICA

LINE FILTER

GROUNDING

STUD

POWER SUPPLY

POWER DIST.

BILL VALIDATOR

(USER INSTALLED OPTION)

INTERNATIONAL

LINE FILTER

GROUNDING

STUD

POWER SUPPLY

POWER DIST.

LINE CORDS

Part Number Description

034-6012-00 Line Cord, 3m, 5-15P USA 034-6012-01 Line Cord, 3m, CEE77P EUROPE 034-6012-02 Line Cord, 3m, BS1363P United Kingdom 034-6012-03 Line Cord, 3m, AS-NZS4417P Australia 034-6012-04 Line Cord, 3m, CEI23-16P Italy 034-6012-05 Line Cord, 3m, SEV1011P Switzerland 034-6012-06 Line Cord, 3m, JIS8303P Japan 034-6012-07 Line Cord, 3m, SI32P Israel 034-6012-08 Line Cord, 3m, BS546P S Africa, India 034-6012-09 Line Cord, 3m, IS6538P S. India

LINE FUSES

Line Voltage (Region) Fuse

120V (North America) 8 A Slow Blow MDL 200-5000-05 220/240v (Europe, Australia,

UK)

NEMA 5-15 PREWIRED OUTLET

FUSE

ON/OFF SW

FUSE

Type Part Number

Current

5 A Slow Blow MDL 200-5000-01

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

466

65 5

12 12

5. PARTS REFERENCE

5.1 PLAYFIELD RUBBER PARTS

RUBBER O-RINGS

ID Qty Size (ID) Size (OD) Durometer Color Part Number

1 3 3/16" 50 Black 545-5348-01 2 1 3/8" 50 Black 545-5348-03 3 2 3/4" 50 Black 545-5348-04

4 4 1" 50 Black 545-5348-05 5 2 2" 50 Black 545-5248-08 6 11 7/16" 50 Black 545-5348-17

Figure 5.1.2. Rubber o-ring part numbers and usage. ID: Inner Diameter, OD: Outer Diameter, Durometer: Higher number is rmer, less bounce, and more durable.

ID Qty Description Color Part Number

11 1 Plunger Tip Black 545-5276-00 12 3 Flipper Rubber Black 545-5277-00 13 6 Bumper Pad (Sub assemblies) Black 545-5105-00 14 3 Bumper Pad (Flippers) Black 545-5428-00

Figure 5.1.3. Other rubber part numbers and usage

5.2 RUBBER SIZE CHART

3-1/2”

3”

2-3/4”

2-1/2”

Figure 5.1.1. Rubber o-ring part locations.

7/16”

Figure 5.2.1. Rubber ring inner diameter sizing tool. Hold ring up to chart and read largest size on inside of ring. Dimensions are Inner Diameter (ID) unless otherwise noted as Outer Diameter (OD).

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

2”

1-3/4”

1-1/2”

1-1/4”

1”

3/4”

5/16”

3/8”

3/16”

7/16” OD

3/8” OD

5.3 PLAYFIELD ASSEMBLIES, TOP

PARTS REFERENCE

ID Part Number Description Qty

1 545-5995-02 Bottom Arch Assembly 1

2 755-51I2-12-Y Instruction Card 1 3 755-5400-02-Y Coin Card (USA) 1

4 550-5031-02 Dome - Red 2 5 550-5031-03 Mini Dome - Amber 2 6 545-5409-00 Light Reector 3

7 511-7655-00-I5 Spinner Target & Bracket 1 8 535-1403-00 1-Way Gate Wire 1

535-1402-00 1-Way Gat Bracket 1 9 535-8145-00 Shooter Lane Ramp 1 10 511-7787-00 Electric Gate 1

Figure 5.3.1. Major playeld assemblies, Top locations.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

9 9

10 10

5.4 PLAYFIELD ASSEMBLIES, BOTTOM

ID Part Number Description Qty

1 520-7017-72 Core Node Board 1

2 720-7004-00 LED Board 1 3 520-7005-00 LED Board 1

4 520-7017-72 Core Node Board 1 5 520-5329-72 4-Driver Node Board 1 6 520-7006-00 LED Board 1

7 520-7007-00 LED Board 1 8 520-6996-00 Motor Driver Board 1 9 500-5329-03 Bracket Pivot Pin 2 10 535-5988-01 Edge Slide Bracket 2

Figure 5.4.1. Major playeld assemblies, Bottom locations.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

5.5 BACKBOX PARTS

LCD BACKBOX DOMESTIC VERSION 500-9995-XX

LCD BACKBOX 5009995-XX

SPEAKER/LCD PANEL PARTS 500-9996-XX

PARTS REFERENCE

7 8

Figure 5.5.1. Backbox external assemblies and components.

EXTERNAL

ID Part Number Description Qty

1 660-5052-00 Backglass 1 2 830-52I6-00 Translite Art [LE] 1

830-52I7-00 Translite Art [Premium] 1 3 545-5018-17 Plastic Extrusion 15-.450" 2 4 545-5018-15 Glass Channel 26" 1 5 545-6313-01 Glass Lift Channel 26" 1 6 500-9996-I2 LCD Speaker Panel Assembly 1 7 820-78I6-01 Left Backbox Decal [LE] 1

820-78I7-01 Left Backbox Decal [Premium] 1 8 820-78I6-02 Right Backbox Decal [LE] 1

820-78I7-02 Right Backbox Decal [Premium] 1

Figure 5.5.2. Backbox internal assemblies and components.

INTERNAL

ID Part Number Description Qty

1 509-1000-00 CPU Node Board 1

2 520-5343-01 Power Distribution Board 1 3 011-5003-00 Power Supply 48V/500W 1

4 515-9769-00 Utility Outlet (USA) 1 5 205-5001-00 Fuse Holder-Screw in 1

200-5000-05 8A Fuse 1

6 535-1130-00 Cover AC 1

7 535-1129-00 Power supply bracket 1 8 535-1129-01 Power supply bracket 1 9 180-5001-03 Power Switch 1

034-6012-00 Line Cord-3M 5-15P/C13RA* 1

5.6 SPEAKER PANEL PARTS

500-9996-I6/I7

ID Part Number Description Qty

1 031-5004-02 Speaker 2 2 166-0023-00 1366 x 768 Display LCD Panel 1 3 237-6188-01 Screw, M3x0.5 X 6MM PPH Sems Zinc 4

4 237-6307-06 6-32 X 3/8" Torx Stainless Steel Screw 2 5 240-5005-00 6-32 Nylon Stop Nut 12 6 242-5001-00 #6 Washer 16

7 355-5168-00-00 Nut: Lock w/ Cam 1 8 515-9842-00 Speaker Panel-LCD 1 9 515-9843-00 Speaker Plate 2

10 515-9845-00 Hinge, Speaker Panel, LCD 2 11 545-9877-00 LCD Window 1 12 545-9877-01 Spacer, Small - LCD Speaker Panel 4 13 626-5109-00 Speaker Foam - LCD Panel 2 14 Logo Plate 1

9 10 2 1 5 6

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

35 6

PARTS REFERENCE

5.7 CABINET PARTS

ID Part Number Description Qty

1 525-6011-00 Cabinet (Plunger & Two Buttons) 1

2 535-5989-00 Slide & Pivot Bracket - Left Side 1 3 535-5990-00 Slide & Pivot Bracket - Right Side 1

4 535-0399-00 Cabinet Playeld Support Bracket 1 5 500-2464-19 Front Molding Assembly - No Hole - Purple

6 535-7999-19L Pivot Hinge, Left - Purple Madness [LE] 1

7 535-7999-19L Pivot Hinge, Right - Purple Madness [LE] 1

8 254-5042-00 Spacer Nut, Hex, 1/2"OD, 1/4-20 2 9 242-5084-00 Washer, 1/2" I.D., 3/16" THK 2

10 231-5072-00 1/4-20 X 1/2" Carriage Bolt 2 11 545-5017-00 Plastic Channel 2 12 545-9802-00 Glass Rear Extrusion 1 13 535-9596-19L Side Armor Left - Purple Madness [LE] 1

14 500-6146-00-07 Ball Shooter Assembly 1 15 535-5027-01 Plunger Support Plate, Notched 1 16 500-5026-00 Flipper Button Assembly (Black) [LE] 2

17 501-5018-173 Coin Door 2-Chute No Emboss 1 18 180-5160-01 Flipper Switch, Single 2 19 545-5072-03 Grill - Speaker / Vent 1 20 545-5072-02 Grill - Speaker / Vent 1

500-2464-00 Front Molding Assembly - Wrinkle Black

535-7999-00 Pivot Hinge, Left - Wrinkle Black [Premium] 1

Madness [LE]

[Premium]

535-7999-01 Pivot Hinge, Right - Wrinkle Black [Premium] 1

535-9596-19R Side Armor Left - Purple Madness [LE] 1 535-7297-02 Side Armor - Wrinkle Black [Premium] 2

500-5026-38 Flipper Button Assembly (White) [Premium] 2

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ID Part Number Description Qty

21 031-5007-01 Speaker, Cabinet 8" Round, 4 ohm 1

22 545-5090-00 Cash Box - Plastic 1 23 535-5013-03 Cash Box Cover 1

24 535-7562-00 Cash Box Lock Bracket Wire 1 25 535-7772-00 Hair Pin Clip 1 26 500-5921-19 Leg Assembly - Purple Madness [LE] 4

500-5921-50 Leg Assembly - Wrinkle Black [Premium] 4

27 516-0007-00 Tilt Assembly 1 28 820-78I6-03 Decal, Cabinet Left, Aerosmith LE 1

820-78I7-03 Decal, Cabinet Left, Aerosmith Premium 1

29 820-78I6-04 Decal, Cabinet Right, Aerosmith LE 1

820-78I7-04 Decal, Cabinet Right, Aerosmith Premium 1

30 820-78I6-05 Decal, Cabinet Front, Aerosmith LE 1

820-78I7-05 Decal, Cabinet Front, Aerosmith Premium 1 31 660-5001-00 Playeld Glass 1 32 520-6967-72 Cabinet Node Board 1

820-78I6-XX

Cabinet Decal Replacement Set

820-78I7-XX

PARTS REFERENCE

ITEM

NO.

PART NUMBER

DESCRIPTION

QTY.

510-7532-19

BOTTOM ARCH, STEEL W/ SPADE

BOLTS - PURPLE MADNESS

240-5303-00

4-40 NYLON LOCK NUT

545-5212-04

MYLAR PROTECT STRIP 7-5/8"

830-7050-19

BUTY # 19 - TOYS L E

830-7050-20

BUTY # 20 - TOYS L E

820-7390-08

DECAL # 08 - TOYS L E

820-7390-09

DECAL # 09 - TOYS L E

820-7390-07

DECAL # 07 - TOYS L E

820-7390-06

DECAL # 06 - TOYS L E

5.8 BALL SHOOTER ASSEMBLY

500-6146-00-07

ID Part Number Description Qty

1 535-5067-02 Housing Assembly 1

2 266-5001-07 Compressed Spring (Long) - Orange 1 3 242-5014-00 Washer 3/8 ID x 5/8 OD x 1/16 3

4 515-6557-00 Rod Assembly 1 5 266-5010-00 Compressed Spring (Short) 1 6 270-5012-00 Retaining Ring, 3/8" 1 7 545-5276-00 Rubber Tip 1

5.10 AUTO LAUNCH ASSEMBLY

500-9818-01

5.9 BOTTOM ARCH ASSEMBLY

500-6005-I6/I7

ID Part Number Description Qty

1 510-7532-19 BOTTOM ARCH, STEEL W/ SPADE BOLTS -

PURPLE MADNESS 1

2 240-5303-00 4-40 NYLON LOCK NUT 6 3 545-5212-04 MYLAR PROTECT STRIP 7-5/8" 2

4 830-7050-19 BUTY # 19 1 5 830-7050-20 BUTY # 20 1 6 820-7390-08 *(B) DECAL # 08 1

7 820-7390-09 *(B) DECAL # 09 1 8 820-7390-07 *(B) DECAL # 07 1 9 820-7390-06 DECAL # 06 1

* For Premium Edition

ID Part Number Description Qty

1 515-9689-00 MAIN BRKT: AUTO-PLUNGER 1

2 535-0728-00 KICKER ARM, AUTO-PLUNGER 1 3 270-5001-00 RETAINING E-RING, 3/16" SHAFT OD 1

4 545-5352-00 NYLINER, 3/16" SHAFT 1 5 090-5001-ND COIL - 23-800, NO DIODE 1 6 545-5411-00 COIL SLEEVE 1

7 266-5020-00 COMPRESSION SPRING-CONICAL 1 8 530-7834-00 PIN: KICKER ARM, AUTO-PLUNGER 1

9 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 4 10 530-7835-00 PIVOT, AUTO-PLUNGER 1 11 545-5423-00 NYLINER, 1/4" SHAFT, 4L1-FF 1 12 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2 13 535-6539-00 SWITCH BODY PROTECT PLATE 1 14 180-5157-01 SHOOTER SWITCH - SHORT ARM 1 15 545-6268-00 FISCHE PAPER 1 16 535-0762-00 COIL BRACKET-AUTOPLUNGER 1 17 515-6304-03 PLUNGER / LINK ASSEMBLY 1 18 545-0762-00 FISCHE PAPER: AUTO-LAUNCHER 1

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

5.11 BALL TROUGH ASSEMBLY

500-9820-00

5.12 FLIPPER ASSEMBLY MINI PLAYFIELD

500-6543-17-ND

ID Part Number Description Qty

1 515-7811-00 MAIN BRKT. BALL TROUGH 1

2 515-7812-00 COIL BRACKET, BALL TROUGH 1 3 237-5975-04 SCREW, 8-32 X 1/4" HWH SWAGE SERR 2

4 266-5020-00 COMPRESSION SPRING-CONICAL 1 5 535-5203-03 COIL RETAINING BRACKET 1 6 545-5076-01 COIL SLEEVE 1

7 240-5102-00 8-32 NYLON LOCK NUT 4 8 545-5105-00 RUBBER BUMPER 1 9 515-7309-01 PLUNGER ASSEMBLY 1

10 237-5909-00 SCREW, 4-40 X 1/4" PPH SEMS 4 11 520-5344-00 TROUGH BOARD #1 - ILED TRANSMITTER 1 12 520-5345-00 TROUGH BOARD #2 - RECEIVER 1 13 090-5004-ND COIL 27-1500 - NO DIODE 1 98* 605-5006-00 SHRINK TUBING 1/8" .42

FT.

99* 036-5611-11-F5 CABLE TROUGH OPTOS 1

ID Part Number Description Qty

1 515-6617-01 FLIPPER BASE PLATE LEFT KIT W/

BRACKET MOUNT HARDWARE

2 515-6308-01 COIL STOP BRACKET 1 3 180-5149-00 SWITCH - END OF STROKE N/C 1

4 090-5067-ND COIL 1 5 269-5002-00 SPRING WASHER 1 6 535-7354-00 SWITCH RETURN SPRING BRACKET 1

7 265-5035-00 SPRING FLIPPER RETURN 1 8 535-7356-00 COIL SUPPORT BRACKET 1 9 545-5388-00 COIL SLEEVE, FLIPPER 1

10 545-5070-00 FLIPPER BAT BUSHING 1 11 545-5428-00 FLIPPER BUMPER PAD 1 12 237-6144-00 SET SCREW #10-32 x 3/4" SOCKET 2 13 515-7203-01 PLUNGER/CRANK ASSEMBLY, LEFT 1 14 515-5133-08-06 FLIPPER BAT AND SHAFT 1

500-6307-10 FLIPPER REBUILD KIT, LEFT

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

5.13 FLIPPER ASSEMBLY, LEFT

500-6543-14-ND

5.14 FLIPPER ASSEMBLY, RIGHT

500-6543-04-ND

ID Part Number Description Qty

1 515-6617-01 FLIPPER BASE PLATE LEFT KIT W/

BRACKET MOUNT HARDWARE

2 515-6308-01 COIL STOP BRACKET 1 3 180-5149-00 SWITCH - END OF STROKE N/C 1

4 090-5030-ND COIL 1 5 269-5002-00 SPRING WASHER 1 6 535-7354-00 SWITCH RETURN SPRING BRACKET 1

7 265-5035-00 SPRING FLIPPER RETURN 1 8 535-7356-00 COIL SUPPORT BRACKET 1 9 545-5388-00 COIL SLEEVE, FLIPPER 1

500-6307-10 FLIPPER REBUILD KIT, LEFT

* Refer to game rubber chart for ipper rubber color and part number.

ID Part Number Description Qty

1 515-6617-00 FLIPPER BASE PLATE RIGHT KIT W/

2 515-6308-01 COIL STOP BRACKET 1

3 180-5149-00 SWITCH - END OF STROKE N/C 1

4 090-5030-ND COIL 1 5 269-5002-00 SPRING WASHER 1 6 535-7354-00 SWITCH RETURN SPRING BRACKET 1

7 265-5035-00 SPRING FLIPPER RETURN 1 8 535-7356-00 COIL SUPPORT BRACKET 1 9 545-5388-00 COIL SLEEVE, FLIPPER 1

10 545-5070-00 FLIPPER BAT BUSHING 1 11 545-5428-00 FLIPPER BUMPER PAD 1 12 237-6144-00 SET SCREW #10-32 x 3/4" SOCKET 2 13 515-7203-00 PLUNGER/CRANK ASSEMBLY 1 14 515-5133-08-06 FLIPPER BAT AND SHAFT* 1

500-6307-00 FLIPPER REBUILD KIT, RIGHT

BRACKET MOUNTING HARDWARE

* Refer to game rubber chart for ipper rubber color and part number.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

PART #

DESCRIPTION

500-2441-00

FRONT MOLD ASSEMBLY - TOYS PRO/PREMIUM

545-7292-10

TOP BUTTON SPACER-MOLDED

515-7791-00

BUTTON ASSY - CLEAR

545-7291-00

TOP BUTTON BAR

240-5003-01

PAL NUT

240-5104-00

8-32 KEPS NUT

FRONT MOLD ASSEMBLY - CENTER

BUTTON - TOYS PRO/PREMIUM

500-2440-00

ITEM #

QTY

PART #

DESCRIPTION

1 1

510-7696-00

RIVETED ASSEMBLY - FRONT MOLD - TOYS PRO/PREMIUM

2 2

626-5001-00

FOAM RUBBER, 3/8" W X 3/16" THK

3 2

820-5815-00

MYLAR PAD

ITEM #

QTY

PART #

DESCRIPTION

1 1

500-2441-19

FRONT MOLD ASSEMBLY - TOYS L E

2 1

545-7292-10

TOP BUTTON SPACER-MOLDED

3 1

515-7791-00

BUTTON ASSY - CLEAR

4 1

545-7291-00

TOP BUTTON BAR

5 1

240-5003-01

PAL NUT

6 2

240-5104-00

8-32 KEPS NUT

FRONT MOLD ASSEMBLY - CENTER

BUTTON - TOYS L E

500-2440-19

ITEM #

QTY

PART #

DESCRIPTION

1 1

510-7696-19

RIVETED ASSEMBLY - FRONT MOLD - TOYS L E

2 2

626-5001-00

FOAM RUBBER, 3/8" W X 3/16" THK

3 2

820-5815-00

MYLAR PAD

5.15 FRONT MOLD ASSEMBLY LE

500-2440-19

ID Part Number Description Qty

1 500-2441-19 FRONT MOLD ASSEMBLY 1

2 545-7292-10 TOP BUTTON SPACER-MOLDED 1 3 515-7791-00 BUTTON ASSY - CLEAR 1

4 545-7291-00 TOP BUTTON BAR 1 5 240-5003-01 PAL NUT 1 6 240-5104-00 8-32 KEPS NUT 2

5.16 FRONT MOLD ASSEMBLY LE

5.17 FRONT MOLD ASSEMBLY PREMIUM

50-2440-00

ID Part Number Description Qty

1 500-2441-00 FRONT MOLD ASSEMBLY 1

2 545-7292-10 TOP BUTTON SPACER-MOLDED 1 3 515-7791-00 BUTTON ASSY - CLEAR 1

4 545-7291-00 TOP BUTTON BAR 1 5 240-5003-01 PAL NUT 1 6 240-5104-00 8-32 KEPS NUT 2

500-2441-19

ID Part Number Description Qty

1 510-7696-19 RIVETED ASSEMBLY - FRONT MOLD 1

2 626-5001-00 FOAM RUBBER, 3/8" W X 3/16" THK 2 3 820-5815-00 MYLAR PAD 2

5.18 FRONT MOLD ASSEMBLY PREMIUM

50-2441-00

ID Part Number Description Qty

1 510-7696-00 RIVETED ASSEMBLY - FRONT MOLD 1

2 626-5001-00 FOAM RUBBER, 3/8" W X 3/16" THK 2 3 820-5815-00 MYLAR PAD 2

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

5.19 POP BUMPER ASSEMBLY

516-6784-XX

PARTS REFERENCE

ID Part Number Description Qty

1 520-5307-03 POP BUMPER LED MODULE 1

2 545-5197-00 BUMPER BODY 1 3 515-5085-00 RING AND ROD ASSY 1

4 545-5607-00 BUMPER SKIRT 1 5 266-5048-00 BUMPER SKIRT COMP SPRING 1 6 545-5195-00 BUMPER BASE 1

Part Number Description Qty

515-6459-01L BUMPER/RING TOP ASSY, W/ LED 1 1 515-6459-04-ND BUMPER BOTTOM ASSY, NO DIODE 1

ID Part Number Description Qty

7 500-9934-01 POP BUMPER SWITCH ASSY-2 - LUG-LEFT 1 8 240-5005-00 6-32 NYLON STOP NUT 3 9 090-5044-ND COIL - 26-1200 1

10 237-5976-01 #6-32 X 1/4" SHWH SWAGE ZN 2 11 240-5005-00 #6-32 NYLON STOP NUT 2 12 535-7347-00 METAL YOKE STOP 1 13 234-5101-00 * 8 X 1/2 SLT 6 14 530-5348-00 PLUNGER, POP BUMPER 1 15 266-5047-00 COMPRESSION SPRING, POP BUMPER 1 16 545-5031-00 COIL SLEEVE 1 17 515-5939-00 COIL BRACKET POP BUMPER ASSY 1 18 545-5609-00 FIBER YOKE 1 19 535-7346-00 METAL YOKE 1 20 237-5957-00 #6-32 x 1-3/16" SPIRAL FIN SHANK SCREW 3

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

1 1

830-7049-04

BUTY # 04 - TOYS L E

2 1

237-5506-00

SCREW, 6-32 X 1" PPH MS

3 2

232-5202-00

SCREW, 6-32 X 1/2" PPH MS SEMS

4 3

240-5005-00

6-32 NYLON STOP NUT

5 2

242-5001-00

#6 WASHER

6 1

254-5000-14

NYLON SPACER - BLACK - 3/8 OD X .175 ID X 5/8"

7 1

520-7000-00

SINGLE FLASH LED BOARD

8 1

550-5031-02

MINI MARS W/ EARS - RED SB

BUTY ASSEMBLY # 04 - TOYS L E

511-7754-04

DESCRIPTION RIVETED BUTY ASSEMBLY # 05 - TOYS L E BUTY # 36 - TOYS L E SCREW, 6-32 X 3/8" PPH MS SEMS #6 WASHER HEX SPACER - 5/8 " HEX SPACER - 7/8 " SCREW, 6-32 X 1/4" PPH SEMS BUTY ASSEMBLY # 35 - TOYS L E #4 FLAT WASHER - 5/16" O.D. SCREW, 4-40 X 1/4" PPH SEMS

BUTY ASSEMBLY # 05 - TOYS L E

DESCRIPTION BUTY # 09 - TOYS L E #6 WASHER HEX SPACER - 3/4 " SCREW, 6-32 X 3/8" PPH MS SEMS

ITEM #

QTY

PART #

DESCRIPTION

1 1

830-7049-02

BUTY # 02 - TOYS L E

2 2

232-5202-00

SCREW, 6-32 X 1/2" PPH MS SEMS

3 2

240-5005-00

6-32 NYLON STOP NUT

4 2

242-5001-00

#6 WASHER

5.20 BUTY ASSEMBLY #02

511-7754 - 02

ID Part Number Description Qty

1 830-7049-02 BUTY # 02 1

2 232-5202-00 SCREW, 6-32 X 1/2" PPH MS SEMS 2 3 240-5005-00 6-32 NYLON STOP NUT 2

4 242-5001-00 #6 WASHER 2 5 520-7000-00 SINGLE FLASH LED BOARD 1 6 550-5031-02 MINI MARS W/ EARS - RED SB 1

5.21 BUTY ASSEMBLY #04

511-7754 - 04

5.22 BUTY ASSEMBLY #05

511-7754 - 05

ID Part Number Description Qty

1 510-7554-05 RIVETED BUTY ASSEMBLY # 05 1

2 830-7049-36 BUTY # 36 1 3 232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 2

4 242-5001-00 #6 WASHER 4 5 254-5008-02 HEX SPACER - 5/8 " 1 6 254-5008-05 HEX SPACER - 7/8 " 1

7 232-5200-00 SCREW, 6-32 X 1/4" PPH SEMS 2 8 511-7754-35 BUTY ASSEMBLY # 35 1 9 242-5002-00 #4 FLAT WASHER - 5/16" O.D. 2 10 237-5909-00 SCREW, 4-40 X 1/4" PPH SEMS 2

5.23 BUTY ASSEMBLY #09

511-7754 - 09

ID Part Number Description Qty

1 830-7049-04 BUTY # 04 1

2 237-5506-00 SCREW, 6-32 X 1" PPH MS 1 3 232-5202-00 SCREW, 6-32 X 1/2" PPH MS SEMS 2

4 240-5005-00 6-32 NYLON STOP NUT 3 5 242-5001-00 #6 WASHER 2

6 254-5000-14 NYLON SPACER - BLACK - 3/8 OD X .175

7 520-7000-00 SINGLE FLASH LED BOARD 1 8 550-5031-02 MINI MARS W/ EARS - RED SB 1

ID X 5/8"

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ID Part Number Description Qty

1 830-7049-09 BUTY # 09 1

2 242-5001-00 #6 WASHER 1 3 254-5008-04 HEX SPACER - 3/4 " 1

4 232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 1

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

1 1

830-7049-14

BUTY # 14 - TOYS L E

2 2

232-5201-00

SCREW, 6-32 X 3/8" PPH MS SEMS

3 1

254-5008-14

HEX SPACER - 3"

4 1

511-5240-08

SPOTLIGHT - LED FLASHER - WHITE

5 1

242-5015-00

#8 WASHER - .170 ID X 1/2 OD X .042

6 1

242-5001-00

#6 WASHER

BUTY ASSEMBLY # 14 - TOYS L E

511-7754-14

PART #

DESCRIPTION

830-7050-23

BUTY # 23 - TOYS L E

830-7050-29

BUTY # 29 - TOYS L E

254-5000-07

NYLON SPACER - BLACK - 3/8 OD X .175 ID X 3/4"

240-5005-00

6-32 NYLON STOP NUT

237-6034-00

SCREW, 6-32 X 1-1/4" PFH ZINC

830-7049-29

BUTY # 29 - TOYS L E

535-1434-00

BRACKET - MINI ELEVATOR

880-6196-00

MINI ELEVATOR - TOYS L E

520-7000-00

SINGLE FLASH LED BOARD

237-5501-00

SCREW, 6-32 X 3/8" PPH MS ZINC

237-5809-00

SCREW, #6 X 1/2" PTH A

232-5200-00

SCREW, 6-32 X 1/4" PPH SEMS

820-7390-27

DECAL # 27 - TOYS L E

BUTY ASSEMBLY # 23 - TOYS L E

5.24 BUTY ASSEMBLY #10

511-7754 -10

ID Part Number Description Qty

1 830-7049-10 BUTY # 10 1

2 550-5032-03 HAT - AMBER SB 1 3 232-5202-00 SCREW, 6-32 X 1/2" PPH MS SEMS 1

4 240-5005-00 6-32 NYLON STOP NUT 2 5 242-5001-00 #6 WASHER 1 6 520-7000-00 SINGLE FLASH LED BOARD 1

7 232-5206-00 SCREW, 6-32 X 1" PPH SEMS 1 8 254-5000-14 NYLON SPACER - BLACK - 3/8 OD X .175

ID X 5/8"

5.26 BUTY ASSEMBLY #14

511-7754 -14

ID Part Number Description Qty

1 830-7049-14 BUTY # 14 1

2 232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 2 3 254-5008-14 HEX SPACER - 3" 1

4 511-5240-08 SPOTLIGHT - LED FLASHER - WHITE 1 5 242-5015-00 #8 WASHER - .170 ID X 1/2 OD X .042 1 6 242-5001-00 #6 WASHER 1

5.27 BUTY ASSEMBLY #23

511-7754-23

5.25 BUTY ASSEMBLY #12

511-7754 -12

ID Part Number Description Qty

1 510-7554-12 RIVETED BUTY ASSEMBLY # 12 1

2 232-5201-00 SCREW, 6-32 X 3/8" PPH MS SEMS 1 3 254-5008-04 HEX SPACER - 3/4 " 1

4 242-5001-00 #6 WASHER 1

ID Part Number Description Qty

1 830-7050-23 BUTY # 23 1

2 830-7050-29 BUTY # 29 1 3 254-5000-07 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 3/4" 5

4 240-5005-00 6-32 NYLON STOP NUT 5 5 237-6034-00 SCREW, 6-32 X 1-1/4" PFH ZINC 5 6 830-7049-29 BUTY # 29 1

7 535-1434-00 BRACKET - MINI ELEVATOR 1 8 880-6196-00 MINI ELEVATOR 1 9 520-7000-00 SINGLE FLASH LED BOARD 1

10 237-5501-00 SCREW, 6-32 X 3/8" PPH MS ZINC 1 11 237-5809-00 SCREW, #6 X 1/2" PTH A 2 12 232-5200-00 SCREW, 6-32 X 1/4" PPH SEMS 2 13 820-7390-27 DECAL # 27 1

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

1 1

830-7050-24

BUTY # 24 - TOYS L E

2 1

550-7361-01

MINI DOME-LED, CLEAR

ITEM #

QTY

PART #

DESCRIPTION

DESCRIPTION BUTY # 26 - TOYS L E SCREW, 4-40 x 3/8 PFH MS, BLACK 4-40 NYLON LOCK NUT SINGLE FLASH LED BOARD MINI DOME-LED, CLEAR #6 WASHER SCREW, 6-32 X 7/8" PPH SEMS NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/2" 6-32 NYLON STOP NUT

BUTY ASSEMBLY # 26 - TOYS L E

511-7754-26

ITEM #

QTY

PART #

DESCRIPTION

1 1

830-7050-27

BUTY # 27 - TOYS L E

2 1

237-5983-00

SCREW, 4-40 x 3/8 PFH MS, BLACK

3 1

240-5303-00

4-40 NYLON LOCK NUT

4 1

520-7000-00

SINGLE FLASH LED BOARD

5 1

550-7361-01

MINI DOME-LED, CLEAR

5.28 BUTY ASSEMBLY #24

511-7754-24

ID Part Number Description Qty

1 830-7050-24 830-7050-24 BUTY # 24 1

2 550-7361-01 MINI DOME-LED, CLEAR 1 3 520-7000-00 SINGLE FLASH LED BOARD 1

4 240-5303-00 4-40 NYLON LOCK NUT 1 5 237-5983-00 SCREW, 4-40 x 3/8 PFH MS, BLACK 1

5.29 BUTY ASSEMBLY #25

511-7754 -25

5.30 BUTY ASSEMBLY #26

511-7754-26

ID Part Number Description Qty

1 830-7050-26 BUTY # 26 1

2 237-5983-00 SCREW, 4-40 x 3/8 PFH MS, BLACK 2 3 240-5303-00 4-40 NYLON LOCK NUT 2

4 520-7000-00 SINGLE FLASH LED BOARD 2 5 550-7361-01 MINI DOME-LED, CLEAR 2 6 242-5001-00 #6 WASHER 1

7 232-5205-00 SCREW, 6-32 X 7/8" PPH SEMS 1 8 254-5000-01 NYLON SPACER - BLACK - 3/8 OD X

.175 ID X 1/2"

9 240-5005-00 6-32 NYLON STOP NUT 1

ID Part Number Description Qty

1 830-7050-25 BUTY # 25 1

2 237-5983-00 SCREW, 4-40 x 3/8 PFH MS, BLACK 1 3 240-5303-00 4-40 NYLON LOCK NUT 1

4 520-7000-00 SINGLE FLASH LED BOARD 1 5 550-7361-01 MINI DOME-LED, CLEAR 1

5.31 BUTY ASSEMBLY #27

511-7754 -27

ID Part Number Description Qty

1 830-7050-27 BUTY # 27 1

2 237-5983-00 SCREW, 4-40 x 3/8 PFH MS, BLACK 1 3 240-5303-00 4-40 NYLON LOCK NUT 1

4 520-7000-00 SINGLE FLASH LED BOARD 1 5 550-7361-01 MINI DOME-LED, CLEAR 1

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

1 1

830-7049-35

BUTY # 35 - TOYS L E

2 2

237-5816-00

SCREW, 4-40 X 1/2" PPH

3 2

240-5303-00

4-40 NYLON LOCK NUT

4 2

242-5002-00

#4 FLAT WASHER - 5/16" O.D.

5 2

520-5307-00

SINGLE LED PCB

ITEM #

QTY

PART #

DESCRIPTION

1 1

515-9913-00

BRACKET, ELEC GATE, BK. PANEL MNT

2 1

090-5060-01-ND

MINI-COIL W/CORE, ND - 32-1250, YELLOW

3 1

535-9577-00

COVER, ELECTRIC GATE

4 1

242-5005-00

#8 WASHER

5 1

240-5102-00

8-32 NYLON LOCK NUT

6 1

535-5372-00

REBOUND HINGE PIN

7 1

535-9682-00

GATE - ELECTRIC (MAGNET)

8 1

530-5702-01

CLEVIS PIN W/ RING, 3/16"D X 1-1/2"

511-7787-00

LEFT

511-7787-01

RIGHT

ASSY, ELEC GATE, B.P. MT - FRT

# T

RAPNOI TPIRCSED

0 - 2025- 232 SMES SM HPP " 2/1 X 23- 6 ,WERCS

21 - 0005- 4

52 " 8 / 3 X D I 571 . X DO 8/3 - KCALB - RECAPS NOLYN

HSAW 540. X .D.O 8/7 X .D. I 61/3

- 1206 -732 CNIZ HFP "8/7 X 23-6 ,WERCS

X.X

XX . X

XXX . X

: S E L OH

: S E L GNA

510.

010.

500.

300 .

2/1

Y B NWA R D

ETAD

.CNI ,LLABNIP NRETS

70006 L I ,EGALLIV EVORG KLE . EVA TNUL 1002

: DE I F I CE PS ES I WREHTO SSE LNU SECNARELOT

61 / 82/ 3RM J

NO I TC E J ORP E L GNA DR I H T

YROTSIH NOISIVER

. VER NO I TP I RCSED NCE ETAD DEVORPPA

: 6 MET I ; 2 SAW .TNAUQ 00- 2025 - 232 : 3 MET I X1 : 7 MET I DDA ; 2 SAW . TNAUQ 00 -1005 - 242

; 00- 9505 - 242 X1 : 8 MET I DDA ; 21 - 0005 - 452

. 00- 1206 - 732 X1 : 9 MET I DDA

69271

71 / 71 / 1

RMJ

]MM [ SEHCN I N I ERA M I D DE I F I CEP S ES I WREHTO SSEL NU

90 0 2 - M5 . 4 1 Y EMSA RE P LOT DNA M I D T ERPRETN I

5.32 BUTY ASSEMBLY #30

511-7754-30

ID Part Number Description Qty

1 830-7049-30 BUTY # 30 1

2 232-5202-00 SCREW, 6-32 X 1/2" PPH MS SEMS 1 3 240-5005-00 6-32 NYLON STOP NUT 2

4 242-5001-00 #6 WASHER 1 5 520-7000-00 SINGLE FLASH LED BOARD 1 6 550-5031-06 MINI MARS W/ EARS - YELLOW SB 1 7 254-5000-12 NYLON SPACER - BLACK - 3/8 OD X .175

ID X 3/8"

8 242-5059-00 3/16 I.D. X 7/8 O.D. X .045 WASHER 1 9 237-6021-00 SCREW, 6-32 X 7/8" PFH ZINC 1

5.33 BUTY ASSEMBLY #32

5.34 BUTY ASSEMBLY #35

511-7754 - 35

ID Part Number Description Qty

1 830-7049-35 BUTY # 35 1

2 237-5816-00 SCREW, 4-40 X 1/2" PPH 2 3 240-5303-00 4-40 NYLON LOCK NUT 2

4 242-5002-00 #4 FLAT WASHER - 5/16" O.D. 2 5 520-5307-00 SINGLE LED PCB 2

6 550-7361-06 MINI DOME-LED, YELLOW 1 7 550-7361-05 MINI DOME-LED, BLUE 1

5.35 ELECTRIC GATE ASSEMBLY

511-7787-XX

511-7754 - 32

ID Part Number Description Qty

1 830-7049-32 BUTY # 32 1

2 550-5032-03 HAT - AMBER SB 1 3 232-5202-00 SCREW, 6-32 X 1/2" PPH MS SEMS 2

4 242-5001-00 #6 WASHER 2 5 520-7000-00 SINGLE FLASH LED BOARD 1 6 240-5005-00 6-32 NYLON STOP NUT 2

ID Part Number Description Qty

1 515-9913-00 BRACKET, ELEC GATE, BK. PANEL MNT 1

RING

2 090-5060-01-ND MINI-COIL W/CORE, ND - 32-1250, YELLOW 1 3 535-9577-00 COVER, ELECTRIC GATE 1

4 242-5005-00 #8 WASHER 1 5 240-5102-00 8-32 NYLON LOCK NUT 1 6 535-5372-00 REBOUND HINGE PIN 1

7 535-9682-00 GATE - ELECTRIC (MAGNET) 1 8 530-5702-01 CLEVIS PIN W/ RING, 3/16"D X 1-1/2" 1

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

LOCTITE 243

ITEM #

QTY

PART #

DESCRIPTION

1 1

535-1413-00

BRACKET - TOY BOX BUMPER

ITEM #

QTY

PART #

DESCRIPTION

1 1

545-5195-00

BUMPER BASE

2 1

545-5197-00

BUMPER BODY

3 1

545-5607-04

BUMPER SKIRT - TRIMMED

4 1

266-5048-00

COMPRESSION SPRING, POP BUMPER BODY

5 1

511-7670-00

POP BUMPER LED PCB W/ WIRES

ITEM #

QTY

PART #

DESCRIPTION

5.36 POP BUMPER TOP ASSEMBLY

511-7765-00

ID Part Number Description Qty

1 545-5195-00 BUMPER BASE 1

2 545-5197-00 BUMPER BODY 1 3 545-5607-04 BUMPER SKIRT - TRIMMED 1

4 266-5048-00 COMPRESSION SPRING, POP BUMPER BODY 1 5 511-7670-00 POP BUMPER LED PCB W/ WIRES 1

5.38 TOY BOX FRONT PLATE ASSEMBLY

511-7766-00

ID Part Number Description Qty

1 545-9905-00 FRONT PLATE 1

2 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1 3 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1

4 237-5880-02 SCREW, #6 X 1/2 PPH T-25 4

5.39 BUMPER ASSEMBLY - TOY BOX

511-7782-00

5.37 BUMPER RING TOP ASSEMBLY

515-9900-00

ID Part Number Description Qty

1 511-7765-00 POP BUMPER TOP ASSY W/ LED - RGB

2 515-5085-01 RING ASSEMBLY - TRIMMED 1

- TRIMMED

ID Part Number Description Qty

1 535-1413-00 BRACKET - TOY BOX BUMPER 1

2 626-5108-00 RUBBER BUMPER - TOY BOX 1 3 242-5005-00 #8 WASHER 2

4 232-5301-00 SCREW, 8-32 X 3/8" PPH SEMS 2

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

ITEM NO.

PART NUMBER

DESCRIPTION

Default/

QTY.

535-1372-00

FLIPPER COIL-SOLENOID UK

BRACKET

545-5847-00

COIL SLEEVE

535-7356-00

COIL BRACKET

237-5975-00

SCREW, 8-32 X 3/8" HWH SWAGE

280-5014-00

ADJUSTABLE BUMPER/STOP

266-5020-00

COMPRESSION SPRING-CONICAL

269-5002-00

SPRING WASHER

511-7773-00

PLUNGER ASSEMBLY-PULL

DOWN

535-8303-00

ADJUSTMENT BRACKET, UP

POST

530-5511-01

SHAFT HEAD

090-5083-06-ND

COIL - 23-620/30-3900 - NO

DIODE

240-5203-00

10-32 NYLON LOCK NUT

237-5985-00

SCREW, 10-32 X 3/8" HWH

SWAGE

TITLE

STERN PINBALL, INC.

2001 LUNT AVE. ELK GROVE VILLAGE, IL 60007

UK ASSEMBLY-TOY BOX

511-7772-00

ESOOL STOLS ROF SWERCS ELBMESSA

RETFA NETHGI T . STEKCARB ELGNA OT

EBUT OT DEHCATTA ERA STEKCARB

SM222 ETITCOL

11 2

YROTSIH NOISIVER

.VER NOITPIRCSED NCE E TAD DEVORPPA

A E SA E L ER NO I T CUDORP 61 - 22 - 21 RJM

B 10 -5041 - 535 DEDDA 37271 61 -32 - 21 RJM

SDRAOB ROSNES LAC I TPO EHT DETADPU

HCUM ROF SC I T PO REGRA L E SU O T

YTI LANOITCNUF DNA YT ILIBAI LER REHGIH

00371 71 -32 - 1 RJM

5.40 TOY BOX UP KICKER ASSEMBLY

511-7772-00

1013

ID Part Number Description Qty

1 535-1372-00 FLIPPER COIL-SOLENOID UK BRACKET 1

2 545-5847-00 COIL SLEEVE 1 1 3 535-7356-00 COIL BRACKET 2 2

4 237-5975-00 SCREW, 8-32 X 3/8" HWH SWAGE ZN 6 5 280-5014-00 ADJUSTABLE BUMPER/STOP 1 6 266-5020-00 COMPRESSION SPRING-CONICAL 1

7 269-5002-00 SPRING WASHER 1 8 511-7773-00 PLUNGER ASSEMBLY-PULL DOWN 1 9 535-8303-00 ADJUSTMENT BRACKET, UP POST 1

10 530-5511-01 SHAFT HEAD 1 11 090-5083-06-ND COIL - 23-620/30-3900 - NO DIODE 1 12 240-5203-00 10-32 NYLON LOCK NUT 1 13 237-5985-00 SCREW, 10-32 X 3/8" HWH SWAGE 1

5.41 TOY BOX TUBE ASSEMBLY

511-7776-00

ID Part Number Description Qty

1 515-9898-01 ELEVATOR TUBE WELDMENT 1

2 237-5871-01 SCREW, 6-32 X 1/4" PFH 82-DEG U/C ZINC 2 3 237-5912-00 237-5912-00 SCREW, 4-40 X 3/16" PPH MS 8 8

4 535-1565-01 SWITCH L SUPPORT 1 5 535-1565-00 SWITCH L SUPPORT 1 6 535-1405-00 SWITCH L SUPPORT 1

7 535-1405-01 SWITCH L SUPPORT 1 8 036-6266-15-I5 TOY OPTO EMITTER CABLE 1 9 036-6266-16-I5 TOY OPTO RECEIVER CABLE 1

10 520-7037-01 3 OPTO BOARD-RECEIVER 1 11 520-7036-01 3 OPTO BOARD-EMITTER 1

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

25 21 10

ITEM NO.

PART NUMBER

DESCRIPTION

Default/

QTY.

880-6191-01

TOY BOX

535-1401-00

PEM STUD PLATE

515-9964-00

TOY BOX CLEVIS PLATE

545-5105-00

RUBBER BUMPER

240-5005-00

6-32 NYLON STOP NUT

242-5015-00

#8 WASHER - .170 ID X 1/2 OD X

.042

232-5301-00

SCREW, 8-32 X 3/8" PPH SEMS

535-1422-00

TOY BOX MOUNTING ANGLE

242-5001-00

#6 WASHER

237-6021-00

SCREW, 6-32 X 7/8" PFH ZINC

535-1423-00

PEM INSERT NUT PLATE

535-1375-00

TOYBOX BOX COVER

515-9901-00

TOY BOX COVER SUPPORT

180-5119-02

MICRO-SWITCH - LIGHT

ACTUATION

237-5937-02

SCREW, 2-56 X 1/2" HWH MS

830-6117-00

SWITCH SPACER

535-6539-00

SWITCH BODY PROTECT PLATE

535-1376-00

TOYBOX SWITCH ACTUATOR

880-6192-01

TOY BOX LID

232-5204-00

SCREW, 6-32 X 3/4" PPH SEMS

390-5044-03

4" LEAF HINGE

237-5912-00

SCREW, 4-40 X 3/16" PPH MS

515-9965-00

JESTER HEAD ASSEMBLY-TOYS

237-5975-02

8-32 X 3/4 HWH SWAGE

237-5833-00

SCREW, #4 X 5/8" PFH - BLACK

TITLE

STERN PINBALL, INC.

2001 LUNT AVE. ELK GROVE VILLAGE, IL 60007

TOY BOX ASSEMBLY

511-7770-00

ECN

ITEM NO.

PART NUMBER

DESCRIPTION

Default/

QTY.

535-0143-01

MOTOR MOUNT BRKT, TOYS

237-6188-01

SCREW, M3x0.5 X 6MM PPH SEMS

ZINC

515-7678-01

CRANK ARM, TOY SLIDER

237-6317-00

10-32 X 3/16 SS CUP POINT SET

SCREW

270-5002-00

RETAINING RING - 1/4"

180-5010-04

MICRO-SWITCH

535-6539-00

SWITCH BODY PROTECT PLATE

237-5937-02

SCREW, 2-56 X 1/2" HWH MS

040-5002-00

MOUNTING PAD

242-5072-01

NYLON WASHER .252 ID X .472 OD

535-0612-00

DRIVE PLATE

269-5007-00

BELLEVILLE DISC SPRING

242-5608-02

.005 SHIM WASHER

242-5015-00

#8 WASHER - .170 ID X 1/2 OD X .042

237-5903-00

SCREW, 8-32 X 3/8" HWH

535-1404-00

CLEVIS BRACKET

550-7378-00

TOY BOX ELEVATOR GUIDE

232-5100-00

#8 X 1/2" PPH ZINC WOOD SCREW

5.42 TOY BOX PLATE ASSEMBLY

511-7770-00

5.43 ARK SLIDER-CRANK ASSEMBLY

511-7771-00

ID Part Number Description Qty

1 880-6191-01 TOY BOX 1

2 535-1401-00 PEM STUD PLATE 2 3 515-9964-00 TOY BOX CLEVIS PLATE 1

4 545-5105-00 RUBBER BUMPER 2 5 240-5005-00 6-32 NYLON STOP NUT 8 6 242-5015-00 #8 WASHER - .170 ID X 1/2 OD X .042 4

7 232-5301-00 SCREW, 8-32 X 3/8" PPH SEMS 4 8 535-1422-00 TOY BOX MOUNTING ANGLE 2 9 242-5001-00 #6 WASHER 4

10 237-6021-00 SCREW, 6-32 X 7/8" PFH ZINC 4 11 535-1423-00 PEM INSERT NUT PLATE 2 12 535-1375-00 TOYBOX BOX COVER 1 13 515-9901-00 TOY BOX COVER SUPPORT 1 14 180-5119-02 MICRO-SWITCH - LIGHT ACTUATION 1 15 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2 16 830-6117-00 SWITCH SPACER 1 17 535-6539-00 SWITCH BODY PROTECT PLATE 1 18 535-1376-00 TOYBOX SWITCH ACTUATOR 1 19 880-6192-01 TOY BOX LID 1 20 232-5204-00 SCREW, 6-32 X 3/4" PPH SEMS 4 21 390-5044-03 4" LEAF HINGE 1 22 237-5912-00 SCREW, 4-40 X 3/16" PPH MS 2

23 515-9965-00 JESTER HEAD ASSEMBLY 1 24 237-5975-02 8-32 X 3/4 HWH SWAGE 1 25 237-5833-00 SCREW, #4 X 5/8" PFH - BLACK 8

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

ID Part Number Description Qty

1 535-0143-01 MOTOR MOUNT BRKT 1

2 237-6188-01 SCREW, M3x0.5 X 6MM PPH SEMS ZINC 3 3 515-7678-01 CRANK ARM, TOY SLIDER 1

4 237-6317-00 10-32 X 3/16 SS CUP POINT SET SCREW 1 5 270-5002-00 RETAINING RING - 1/4" 3 6 180-5010-04 MICRO-SWITCH 2

7 535-6539-00 SWITCH BODY PROTECT PLATE 2 8 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 4 9 040-5002-00 MOUNTING PAD 2

10 242-5072-01 NYLON WASHER .252 ID X .472 OD 1 11 535-0612-00 DRIVE PLATE 2 12 269-5007-00 BELLEVILLE DISC SPRING 4 13 242-5608-02 .005 SHIM WASHER 1 14 242-5015-00 #8 WASHER - .170 ID X 1/2 OD X .042 1 15 237-5903-00 SCREW, 8-32 X 3/8" HWH 1 16 535-1404-00 CLEVIS BRACKET 2 17 550-7378-00 TOY BOX ELEVATOR GUIDE 1 18 232-5100-00 #8 X 1/2" PPH ZINC WOOD SCREW 4 19 041-5132-01 DC GEARHEAD MOTOR, 24 VDC 10 RPM 1 20 545-9900-10 DRIVE LINKAGE-ACETAL 1 21 530-7865-06 PIVOT PIN-.250" DIA. 1

22 530-7808-03 HUB - CLUTCH DRIVE 1 23 545-9903-00 TOY BOX ELEVATOR RAMP 1

24 237-5822-00 SCREW, #8 X 3/4 PFH AB 4

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

1 1

515-9914-00

REAR TROUGH - TOYS L E

2 1

535-1432-00

SEPARATOR PLATE

3 1

535-1431-00

REAR VUK TUBE - TOYS L E

4 2

237-5975-01

SCREW, 8-32 x 1/2 HWH SLOT SERR SW ZINC

5 1

515-9915-00

INTERFACE PLATE

6 1

500-6867-04

V.U.K. ASSEMBLY - 24-940 COIL - L.H.

7 2

240-5203-00

10-32 NYLON LOCK NUT

8 4

240-5102-00

8-32 NYLON LOCK NUT

REAR VUK ASSEMBLY - TOYS L E

500-1026-00

DESCRIPTION VUK BRACKET - L.H. - NO ACTUATOR COIL - 24-940, NO DIODE PLUNGER ASSEMBLY COIL SLEEVE RUBBER BUMPER SUB MINIATURE SWITCH - SIM. ROLLER COIL RETAINING BRACKET SWITCH BODY PROTECT PLATE SCREW, 2-56 X 1/2" HWH MS SCREW, 8-32 X 1/4" PPH SEMS COMPRESSION SPRING-CONICAL

5.44 VUK ASSEMBLY

500-6867-04

LOCTITE 243

ID Part Number Description Qty

1 535-9590-02 VUK BRACKET - L.H. - NO ACTUATOR 1

2 090-5036-ND COIL - 24-940, NO DIODE 1 3 515-7309-00 PLUNGER ASSEMBLY 1

4 545-5076-01 COIL SLEEVE 1 5 545-5105-00 RUBBER BUMPER 1 6 180-5209-00 SUB MINIATURE SWITCH - SIM. ROLLER 1

7 535-5203-03 COIL RETAINING BRACKET 1 8 535-6539-00 SWITCH BODY PROTECT PLATE 1 9 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2

10 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 2 11 266-5020-00 COMPRESSION SPRING-CONICAL 1

5.45 REAR VUK ASSEMBLY

500-1026-00

ID Part Number Description Qty

1 515-9914-00 REAR TROUGH 1

2 535-1432-00 SEPARATOR PLATE 1 3 535-1431-00 REAR VUK TUBE 1

4 237-5975-01 SCREW, 8-32 x 1/2 HWH SLOT SERR SW

ZINC 5 515-9915-00 INTERFACE PLATE 1 6 500-6867-04 V.U.K. ASSEMBLY - 24-940 COIL - L.H. 1

7 240-5203-00 10-32 NYLON LOCK NUT 2 8 240-5102-00 8-32 NYLON LOCK NUT 4

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

PARTS REFERENCE

ITEM #

QTY

PART #

DESCRIPTION

1 1

535-9637-04

BRACKET - EJECT

2 1

090-5004-ND

COIL 27-1500 - NO DIODE

3 1

545-5076-01

COIL SLEEVE

4 1

535-5203-03

COIL RETAINING BRACKET

5 1

545-5105-00

RUBBER BUMPER

6 1

269-5002-00

SPRING WASHER

7 1

266-5020-00

COMPRESSION SPRING-CONICAL

8 2

232-5300-00

SCREW, 8-32 X 1/4" PPH SEMS

9 1

515-7309-00

PLUNGER ASSEMBLY

10 1

180-5209-00

SUB MINIATURE SWITCH - SIM. ROLLER

11 1

535-6539-00

SWITCH BODY PROTECT PLATE

12 2

237-5937-02

SCREW, 2-56 X 1/2" HWH MS

NOT SHN1036-5541-00

GENERIC COIL CABLE

DESCRIPTION BRACKET - ONE WAY GATE WIREFORM - ONE WAY GATE

RIGHT RAMP ASSEMBLY - TOYS L E

500-9992-01

ITEM #

QTY

PART #

DESCRIPTION

1 1

510-7551-00

RIVETED ASSEMBLY - LEFT RAMP - TOYS

2 1

500-9936-04

GATE ASSEMBLY

3 2

232-5200-00

SCREW, 6-32 X 1/4" PPH SEMS

5.46 LEFT RAMP ASSEMBLY

500-9991-00

ID Part Number Description Qty

1 510-7551-00 RIVETED ASSEMBLY - LEFT RAMP 1

2 500-9936-04 GATE ASSEMBLY 1 3 232-5200-00 SCREW, 6-32 X 1/4" PPH SEMS 2

5.47 RIGHT RAMP ASSEMBLY

500-9992-01

5.48 EJECT VUK

500-1050-00

LOCTITE 243

ID Part Number Description Qty

1 515-9984-00 BRACKET - EJECT 1

2 090-5004-ND COIL 27-1500 - NO DIODE 1 3 545-5076-01 COIL SLEEVE 1

4 535-5203-03 COIL RETAINING BRACKET 1 5 545-5105-00 RUBBER BUMPER 1 6 269-5002-00 SPRING WASHER 1

7 266-5020-00 COMPRESSION SPRING-CONICAL 1 8 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 2 9 515-7309-00 PLUNGER ASSEMBLY 1

10 180-5209-00 SUB MINIATURE SWITCH - SIM. ROLLER 1 11 535-6539-00 SWITCH BODY PROTECT PLATE 1 12 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2

036-5541-00 GENERIC COIL CABLE 1

ID Part Number Description Qty

1 510-7552-01 RIVETED ASSEMBLY - RIGHT RAMP 1

2 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1 3 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1

4 237-5880-00 SCREW, #6 X 3/8 PPH T-25 4

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

5.49 ONE WAY GATE ASSEMBLY

511-7769 -00

ID Part Number Description Qty

1 535-1402-00 BRACKET - ONE WAY GATE 1 2 535-1403-00 WIREFORM - ONE WAY GATE 1

PARTS REFERENCE

CRIMP THIS END

ITEM #

QTY

PART #

DESCRIPTION

1 1

525-6007-01

BACK PANEL - TOYS L E

2 2

535-1364-00

SUPPORT BRACKET - MINI PLAYFIELD - TOYS L E

3 6

237-6010-00

#8-32 X 3/4" HWH MS

4 6

242-5005-00

#8 WASHER

5 7

077-5000-00

SOCKET - STAPLED - 2 LUGS

6 1

112-5034-02

DOUBLE LED, BAYONET BASE - RED

7 4

112-5034-08

DOUBLE LED, BAYONET BASE - CLEAR

8 2

112-5034-05

DOUBLE LED, BAYONET BASE - BLUE

9 1

830-7049-21

BUTY # 21 - TOYS L E

10 5

237-5809-00

SCREW, #6 X 1/2" PTH A

11 1

511-7787-00

ASSY, ELEC GATE LEFT, B.P. MT - FRT

12 2

040-5000-03

1/4" CABLE CLAMP

13 2

234-5000-00

SCREW, #6 X 3/8" HWH

14 4

240-5101-00

8-32 T-NUT

BACK PANEL ASSEMBLY - TOYS L E

500-9990-01

LOCTITE 243

QTY.

1 1 1 1 1 1 1 2 1

QTY

PART #

DESCRIPTION

535-1341-04

BALL GUIDE #4, TOYS

511-7769-00

ONE WAY GATE ASSEMBLY

237-5871-01

SCREW, 6-32 X 1/4" PFH 82-DEG U/C ZINC

5.50 40 DEGREE KICKER - LONG THROW

500-1017-00

ID Part Number Description Qty

1 535-0300-00 BRACKET - 40° EJECT - LONG THROW 1

2 269-5002-00 SPRING WASHER 1 3 545-5076-01 COIL SLEEVE 1

4 090-5044-ND COIL 26-1200 - NO DIODE 1 5 535-5203-03 COIL RETAINING BRACKET 1 6 266-5020-00 COMPRESSION SPRING-CONICAL 1

7 515-7309-01 PLUNGER ASSEMBLY 1 8 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 2 9 545-5105-00 RUBBER BUMPER 1

5.52 GATE ASSEMBLY

500-9936-XX

ID Part Number Description Qty

1 535-7756-XX BRACKET - GATE 1

2 535-7755-XX WIRE FORM 1 3 535-6539-00 SWITCH BODY PROTECT PLATE 1

4 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2 5 180-5087-00 SWITCH GATE 1

5.53 BACK PANEL ASSEMBLY

500-9990-01

5.51 BALL GUIDE ASSEMBLY #04

511-7748-04

ID Part Number Description Qty

1 535-1341-04 BALL GUIDE #4 1

2 511-7769-00 ONE WAY GATE ASSEMBLY 1 3 237-5871-01 SCREW, 6-32 X 1/4" PFH 82-DEG U/C ZINC 2

ID Part Number Description Qty

1 525-6007-01 BACK PANEL 1

2 535-1364-00 SUPPORT BRACKET - MINI PLAYFIELD 2 3 237-6010-00 #8-32 X 3/4" HWH MS 6

4 242-5005-00 #8 WASHER 6 5 077-5000-00 SOCKET - STAPLED - 2 LUGS 7 6 112-5034-02 DOUBLE LED, BAYONET BASE - RED 1

7 112-5034-08 DOUBLE LED, BAYONET BASE - CLEAR 4 8 112-5034-05 DOUBLE LED, BAYONET BASE - BLUE 2 9 830-7049-21 BUTY # 21 1

10 237-5809-00 SCREW, #6 X 1/2" PTH A 5 11 511-7787-00 ASSY, ELEC GATE LEFT, B.P. MT - FRT 1 12 040-5000-03 1/4" CABLE CLAMP 2 13 234-5000-00 SCREW, #6 X 3/8" HWH 2 14 240-5101-00 8-32 T-NUT 4

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPECIFICATIONS

6. SPECIFICATIONS

500-55I6-01

SPECIFICATIONS, MECHANICAL, GAME SETUP

Specication Imperial Metric

Weight 210 lbs 96 kg

Max dimensions, leg lev elers extended (h, w, d)

Minimum game dimensions (h, w, d)

Minimum room dimen sions per game (h, w, d)

78 x 27.75 x 57 in 198 x 70.5 x 145 cm

76 x 27.75 x 57 in 193 x 70.5 x 145 cm

80 x 36 x 84 in 203 x 91 cm x 214 cm

• (h, w, d) = height, width, depth.

SPECIFICATIONS, MECHANICAL, BOXED

Specication Imperial Metric Weight, boxed (without

pallet) Box dimensions (h, w, d) 56.5 x 31 x 31 in 144 x 79 x 79 cm Minimum dimensions (h,

w, d)

230 lbs 105 kg

76 x 26 x 57 in 193 x 66 x 145 cm

• (h, w, d) = height, width, depth.

SPECIFICATIONS, ELECTRICAL

Specication North America -

Line Voltage, Nominal 120 VAC 240 VAC Line Voltage Range 90 VAC - 250 VAC 90 VAC - 250 VAC Line Frequency * 60 Hz 50 Hz, 60 Hz Line Power, Current -

attract mode Line Power, Current -

nominal Line Power, Current -

peak, <100 ms

120VAC

70 W, 0.6 A @ 120 VAC

360 W, 3 A @ 120 VAC 360 W, 1.5 A @ 240 VAC

540 W, 4.5 A @ 120 VAC

* NOTE: Games designed for 60hz operation (e.g. North America games) will not function correctly on 50hz power and vice versa.

WARNING: Overloading electrical supply circuits is dangerous. Do not overload circuits. To calculate the maximum number of games for a circuit, check circuit amperage rating and divide by the game Nominal Line Power Current rating for your line voltage. For example, a 15A 120V household circuit, 15/3 A (nominal current) = 5 games maximum.

International - 240VAC

70 W, 0.3 A @ 240 VAC

540 W, 2.25 A @ 240 VAC

SPECIFICATIONS, ENVIRONMENT

Minimum Maximum

Temperature, Operating 32 ℉ / 0 ℃ 104℉ / 40 ℃ Temperature, Storage 32 ℉ / 0 ℃ 104℉ / 40 ℃ Relative Humidity, Operating 5% 95% non-condensing Relative Humidity, Storage 5% 95% non-condensing

• (a) "The appliance has to be placed in a horizontal position."

• (b) "This appliance is not to be cleaned by a Water Jet."

• (i) "Do not locate this appliance in an area where a Water

Jet is used."

• (ii) "Do not clean this appliance with a Water Jet."

• (b) If the supply cord is damaged, it must be replaced in

order to avoid a hazard.

6.1 GAME DIMENSIONS

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

SPECIFICATIONS

6.3 WARRANTY

500-55I6-01

meets stringent quality and playability standards.

STERN PINBALL INC LIMITED WARRANTY

Stern Pinball Inc (‘SELLER’) warrants only to the initial purchaser of its products that the items listed below are free from defects in material and workmanship under normal use and service for the warranty period specied:

• Printed circuit boards (game logic): 2 months

• Dot Matrix Display boards: 9 months

No other parts of seller’s product are warranted.

Warranty periods are effective from the initial date of shipment from seller to its authorized distributors.

Seller’s sole liability shall be, at its option, to repair or replace products which are returned to seller during the warranty periods specied, provided:

1. Seller is notied promptly upon discovery by purchaser that stated products are defective.

2. Such products are properly packaged and then returned freight prepaid, to seller’s plant.

This warranty does not apply to any parts damaged during shipment and/or due to improper handling, or due to improper installation or usage, or alteration. In no event shall the seller be liable for any anticipated prots, loss of prots, loss of use, accidental or consequential damages, or any other losses incurred by the customer in connection

with the purchase of a Stern Pinball Inc Product.

WARRANTY DISCLAIMER

Except as specically provided in a written contract between seller and purchaser, there are no other warranties, express or implied, including any implied warranties of merchantability or tness for a particular purpose.

6.2 WARNINGS, COMPLIANCE, AND LEGAL NOTICES

PHOTOSENSITIVE SEIZURES HEALTH WARNING

A very small percentage of people may experience a seizure when exposed to certain visual images, including ashing lights or patterns. Even people with no history of seizures of epilepsy

may have an undiagnosed condition that can cause “photosensitive epileptic seizures” due to certain visual images, ashing lights or patterns. Symptoms can include light-headedness, altered vision, eye or face twitching, jerking or shaking of arms or legs, disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.

IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.

PARTS SUBSTITUTIONS

For safety and reliability, substitute parts and equipment modications are not recommended and may void any and all warranties. Use of Non-Stern Pinball Inc Parts or Modications of game circuitry may adversely affect game play or game safety. Transport pinball machines with hinged backbox in the

down position only! Always take great care when servicing any game. Always ready the service manual before replacing or servicing components. Substitutions of parts or equipment modications may void FCC type acceptance.

Always disconnect the line voltage before servicing. Some parts may remain energized when unplugged. Take great caution when servicing any electrical

components.

FCC CLASS A SUBPART J COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

This Game Service Manual and all other documents relating to this product, playeld components, features, rules, programming, and operation are subject to change without notice (Service Bulletins, if applicable, available through ofcial Stern Pinball website).

RF INTERFERENCE NOTICE

The cable harness placements, ground strap routing, and other shielding have been designed to keep RF radiation and conduction within levels accepted by FCC rules. To maintain these levels, factory harness position, shielding, and ground straps must be installed in their factory locations

should they become disconnected during maintenance.

This document and the data disclosed herein or herewith is not to be reproduced (Except where noted), used, or otherwise disclosed in whole or in part to anyone without written consent of Stern Pinball Inc.

Products in this manual, the company name and devices and the design of the manual itself are protected by federal patents (and patents pending), design registrations, trademarks, and copyrights. Action will be taken in the event of infringement or imitation. The right is reserved to change specica-

tions without prior notice.

AEROSMITH LE / PREMIUM MANUAL 500-55I6-01

1-800-KICKERS

PARTS.SERVICE@STERNPINBALL.COM WWW.STERNPINBALL.COM FACEBOOK.COM/STERNPINBALL

AEROSMITH LE / PREMIUM #500-55I6-01

MANUAL #780-50I6-00

*780-50I6-00*

Stern Pinball AEROSMITH LE, AEROSMITH PREMIUM, 500-55I6-01, 500-55I7-01 Service And Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual