Sterling Plumbing Shower System with Backer Boards 72120106 Specification Sheet
ENSEMBLETM
Features
Compression molded from our exclusive solid Vikrell
•
material
Tongue-and-groove 4-piece modular design allows for
•
easy ″snap together″ installation
Durable high-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
Convenient shelves provide generous storage
•
Shaving ledge and foot rest added for comfort
•
Wall surround allows for attachment of grab bars
•
Tile design
•
48″ (121.9 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)
•
complete unit rough-in dimensions include flange
48″ (121.9 cm) x 34″ (86.4 cm) x 75-3/4″ (192.4 cm)
•
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
•
Specified Model
48″ (121.9 cm) SHOWER BASE AND
SURROUND WITH BACKER BOARDS
®
72120106
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Model Complete Unit Description Colors/Finishes
72120106 48″ (121.9 cm) shower base and wall surround with backer boards, center drain ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72122106 Back wall with backer boards ❑ 0 ❑ Other_____
72105106 End walls with backer boards ❑ 0 ❑ Other_____
Page 1 of 2
1065812-4-
C
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
ENSEMBLETM
Technical Information
Model Door maximum
72120106 44-5/8″ (113.3 cm) 70-1/2″ (179.1 cm)
width
16" (40.6 cm)
4-1/2" (11.4 cm) D.
Drain Cutout
15-13/16"
(40.2 cm)
Door maximum
height
24"
(61 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
10" (25.4 cm)
4" (10.2 cm)
8"
(20.3 cm)
26"
(66 cm)
35-1/4"
(89.5 cm)
48-1/8" (122.2 cm) Min
3-5/16"
(8.4 cm)
Max OD
Drain Hole
1"
(2.5 cm)
2"
(5.1 cm)
Note: Right and left end walls are the same, only mirrored.
Backer board locations
48-1/4" (122.6 cm) Max
Front Wall
2" (5.1 cm)
3-1/2" (8.9 cm)
10" (25.4 cm)
2" (5.1 cm)
10"
(25.4 cm)
2" (5.1 cm)
18" (45.7 cm) Grab Bar
18" (45.7 cm)
or 24" (61 cm)
Grab Bar
End Wall
1"
(2.5 cm)
Product Diagram
77"
(195.6 cm)
12"
(30.5 cm)
Grab Bar
1-5/8" (4.1 cm)
at Midpoint
5-1/2"
(14 cm)
4-1/2"
(11.4 cm)
35-1/4"
(89.5 cm)
1-1/4"
(3.2 cm)
72-1/2"
(184.2 cm)
48"
(121.9 cm)
ENSEMBLETM 48″ (121.9 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2
1065812-4-
C
Loading...