Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72230106, ENSEMBLE 72230106 Specification Sheet

ENSEMBLETM

Features

Compression molded from our exclusive solid Vikrell

•

material
Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
Durable high-gloss finish

•

10-year consumer/3-year commercial limited warranty

•

Convenient shelves provide generous storage

•

Shaving ledge and foot rest added for comfort

•

Wall surround allows for attachment of grab bars

•
60″ (152.4 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)

•

complete unit rough-in dimensions include nailing
flange

60″ (152.4 cm) x 34″ (86.4 cm) x 75-3/4″ (192.4 cm)

•

complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

ASTM E162

•

ASTM E662

•

CSA B45.5/IAPMO Z124

•

Specified Model

60″ (152.4 cm) SHOWER BASE AND

SURROUND WITH BACKER BOARDS

®

72230106

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Model Complete Unit Description Colors/Finishes

72230106 60″ (152.4 cm) shower base and curve wall surrounds with backer boards ❑ 0 ❑ Other_____

Model Wall Component Description Colors/Finishes

72232106 Back wall with backer boards ❑ 0 ❑ Other_____
72205106 End wall with backer boards ❑ 0 ❑ Other_____

Page 1 of 2
1064361-4-

D

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

ENSEMBLETM

Technical Information

Model Door maximum

72230106 56-5/8″ (143.8 cm) 70-1/2″ (179.1 cm)

16"
(40.6 cm)

4-1/2"
(11.4 cm) D.
Drain Cutout

3-5/16"
(8.4 cm) D.
Drain Hole

width

14"
(35.6 cm)

60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max

16"
(40.6 cm)

15-13/16"
(40.2 cm)

30" (76.2 cm)

Door maximum
height

10" (25.4 cm)

4" (10.2 cm)

8"
(20.3 cm)

Installation Notes

Install this product according to the installation guide.

Size the drain cutout to fit the drain assembly that will be
used.

Double studding is recommended for pivot shower door
installations.

Studs should be positioned roughly as shown.

Attach grab bars at the specified backer board locations only.

26"
(66 cm)

35-1/4"
(89.5 cm)

1-3/8" (3.5 cm)
at Midpoint

35-1/4"
(89.5 cm)

1-1/4"
(3.2 cm)

Back Wall

1"
(2.5 cm)

2" (5.1 cm)

Note: Right and left end walls are the same, only mirrored.

Backer board locations

3"
(7.6 cm)

46"
(116.8 cm)

42"
(106.7 cm)
Grab Bar

1"

(2.5 cm)
3"
(7.6 cm)

End Wall

14"
(35.6 cm)

3-1/2" (8.9 cm)

Product Diagram

77"
(195.6 cm)

5-1/2"
(14 cm)

4-1/2"
(11.4 cm)

42" (106.7 cm) Grab Bar

18" (45.7 cm) Grab Bar

22" (55.9 cm)

72-1/2"
(184.2 cm)

60"
(152.4 cm)

ENSEMBLETM 60″ (152.4 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2

1064361-4-

D