Sterling Plumbing Shower Receptor and Wall Surround with Backer Boards 72110106, ENSEMBLE 72110106 Specification Sheet

ENSEMBLETM

Features

Compression molded from our exclusive solid Vikrell

•

material
Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
Durable high-gloss finish

•

10-year consumer/3-year commercial limited warranty

•

Convenient shelves provide generous storage

•

Shaving ledge and foot rest added for comfort

•

Wall surround allows for attachment of grab bars

•

Tile design

•
42″ (106.7 cm) x 35-1/4″ (89.5 cm) x 77″ (195.6 cm)

•

complete unit rough-in dimensions include nailing
flange

42″ (106.7 cm) x 34″ (86.4 cm) x 75-3/4″ (192.6 cm)

•

complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

ASTM E162

•

ASTM E662

•

CSA B45.5/IAPMO Z124

•

Specified Model

42″ (106.7 cm) SHOWER BASE AND

SURROUND WITH BACKER BOARDS

®

72110106

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Model Complete Unit Description Colors/Finishes

72110106 42″ (106.7 cm) shower base and wall surround with backer boards ❑ 0 ❑ Other_____

Model Wall Component Description Colors/Finishes

72112106 Back wall with backer boards ❑ 0 ❑ Other_____
72105106 End wall set with backer boards ❑ 0 ❑ Other_____

Page 1 of 2
1065814-4-

C

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

ENSEMBLETM

Technical Information

Model Door maximum

72110106 38-5/8″ (98.1 cm) 70-1/2″ (179.1 cm)

13"
(33 cm)

3-5/16"
(8.4 cm) OD
Drain Hole

width

16"
(40.6 cm)

4-1/2"
(11.4 cm)
D. Drain
Cutout

42-1/8" (107 cm) Min
42-1/4" (107.3 cm) Max

15-13/16"
(40.2 cm)

21"
(53.3 cm)

Door maximum
height

13"
(33 cm)

10" (25.4 cm)

4" (10.2 cm)

8"
(20.3 cm)

Installation Notes

Install this product according to the installation guide.

Size the drain cutout to fit the drain assembly that will be
used.

Studs should be positioned roughly as shown.

Double studding is recommended for pivot shower door
installations.

Attach grab bars at the specified backer board locations only.

1-5/8" (4.1 cm)
at Midpoint

34"
(86.4 cm)

26"
(66 cm)

77"
(195.6 cm)

35-1/4"
(89.5 cm)

1-1/4"
(3.2 cm)

72-1/2"
(184.2 cm)

5-1/2"
(14 cm)

End Wall

3-1/2" (8.9 cm)

1" (2.5 cm)

18" (45.7 cm)
or 24" (61 cm)
Grab Bar

12" (30.5 cm)
Grab Bar

2" (5.1 cm)

10"
(25.4 cm)

1" (2.5 cm)
from Grout Line

3-1/2"
(8.9 cm)

Back Wall

4-1/2"
(11.4 cm)

12"
(30.5 cm)
Grab Bar

10" (25.4 cm)

Note: Right and left end walls are the
same, only mirrored.

Backer board locations

Product Diagram

ENSEMBLETM 42″ (106.7 cm) SHOWER BASE AND SURROUND WITH BACKER BOARDS
Page2of2

1065814-4-

C

42"
(106.7 cm)