Sterling Plumbing Roll-In Shower 62060103 Specification Sheet

Features

Compression molded from our exclusive solid Vikrell

•

material
Factory installed stainless steel grab bars

•

Engineered for ease of installation

•

Durable swirl-gloss finish

•

10-year consumer/3-year commercial limited warranty

•

Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
1/2″ (13 mm) low profile threshold for easy

•

wheelchair access
63-1/2″ (1613 mm) x 40-5/8″ (1032 mm) x 73-1/4″

•

(1861 mm) direct-to-stud rough-in, including flange
63-1/4″ (1607 mm) x 39-3/8″ (1000 mm) x 72″ (1829

•

mm) complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

ADA

•

ICC/ANSI A117.1

•

HUD, UM Bulletin 73A

•

NAHB Research Foundation, Inc.

•

ASTM E162

•

ASTM E662

•

ANSI Z124.1.2

•

63″ (1600 mm) ADA COMPLIANT

®

ROLL-IN SHOWER

62060103

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Specified Model

Model Description Colors/Finishes

62060103 63″ (1600 mm) ADA compliant* shower receptor and wall

surround, with grab bars

*Product is shipped as ADA compliant with factory assembled grabs bars. When properly installed, the complete
installation is ADA compliant. Components are also available separately but are provided only as ADA adaptable.

❑ 0 ❑ Other_____

Page 1 of 2
1016221-4-

G

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

Installation Notes

Install this product according to the installation guide.

Drain cutout in subfloor to be 10-1/2″ (267 mm) per rough-in
illustration below to allow the backside of the drain to sit
below the subfloor surface.

Studs should be positioned as shown.

Backer boards and fasteners protrude beyond the back wall
1-1/2″ (38 mm). If installing this product against wall board,
1-1/2″ (38 mm) furring strips installed over the wall board are

recommended. The stud pocket depth of 40-5/8″ (1032 mm)
will need to be increased by the combined thickness of the
wall board and furring strips.

16"

(400 mm)

(406 mm)

18-3/4"
(476 mm)

Ø 10-1/2"
(267 mm)
Drain Cutout

63-3/8" (1610 mm) Min
63-1/2" (1613 mm) Max

15-3/4"

16"
(406 mm)

4"
(102 mm)

31-5/8"
(803 mm)

13"
(330 mm)

8"
(203 mm)

Ø 3-5/16"
(84 mm)
Drain Hole

29"
(737 mm)

63-5/16"
(1608 mm)

40-5/8"
(1072 mm) Max

39-3/8"
(1000 mm)

1-1/4"
(32 mm)

8" (203 mm)

63″ (1600 mm) ADA COMPLIANT ROLL-IN SHOWER
Page2of2

1016221-4-

G

73-9/16"
(1868 mm)

39-3/8"
(1000 mm)

1" (25 mm)

Product Diagram

63-1/4"
(1607 mm)

72"
(1829 mm)

33"
(838 mm)

73-1/4"
(1861 mm)