Sterling Plumbing Wall Surround with Backer Boards 71124106, ENSEMBLE 71120118, ENSEMBLE 71120128, ENSEMBLE 71120116 Specification Sheet

ENSEMBLETM

Features

Compression molded from our exclusive solid Vikrell

•

material
Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
Durable high-gloss finish

•

10-year consumer/3-year commercial limited warranty

•

Compatible with 71121110, 71121120, 71121112, and

•

71121122
Allows for future attachment of grab bars

•

Complete unit rough-in dimensions include flange

•
60-1/4″ (153 cm) x 33-1/4″ (84.5 cm) x 54″

•

(137.2 cm)

Codes/Standards Applicable

Specified model meets or exceeds the following:

ASTM E162

•

ASTM E662

•

CSA B45.5/IAPMO Z124

•

BATH AND WALL SURROUND WITH

®

BACKER BOARDS

71120116

ALSO 71120118, 71120126, 71120128

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Specified Model

Model Complete Unit Description Colors/Finishes

71120116 32″ (81.3 cm) bath and wall surround with backer boards, left drain ❑ 0 ❑ Other_____

71120118 32″ (81.3 cm) bath and wall surround with backer boards, above-the-floor left

drain

71120126 32″ (81.3 cm) bath and wall surround with backer boards, right drain ❑ 0 ❑ Other_____

71120128 32″ (81.3 cm) bath and wall surround with backer boards, above-the-floor right

drain

Model Wall Component Description Colors/Finishes

71124106 Complete wall set with backer boards ❑ 0 ❑ Other_____

❑ 0 ❑ Other_____

❑ 0 ❑ Other_____

Page 1 of 2
1061193-4-

D

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

ENSEMBLETM

Technical Information

Fixture*:
Basin area:
Bathing well, bottom 42″ (106.7 cm) x 20″ (50.8 cm)
Bathing well, top 54″ (137.2 cm) x 26″ (66 cm)
To overflow:
Water depth 13-3/4″ (34.9 cm)
Capacity 55 gal (208.2 L)
* Approximate measurements for comparison only.

Model Door maximum

71120116
71120118
71120126
71120128

6" (15.2 cm)

width
57-11/16″ (146.5 cm) 55-1/2″ (141 cm)

14" (35.6 cm)

(Typical)

Door maximum
height

30" (76.2 cm)

Installation Notes

Install this product according to the installation guide.

End stud positioning is critical if nailing-in flanges are used.

Double studding is recommended for pivot shower door
installations.

Attach grab bars at the specified backer board locations only.

16" (40.6 cm)

33-1/4" (84.5 cm)

33-1/4"
(84.5 cm)

2" (5.1 cm) D. Drain

3-1/2"
(8.9 cm)

60" (152.4 cm) Min
60-1/8" (152.7 cm) Max

Back Wall End Wall

2" (5.1 cm)

1" (2.5 cm)

3-1/2" (8.9 cm)

Dimensions Taken From
Center of Grout Lines

15-1/2"
(39.4 cm)

30" (76.2 cm)
Grab Bar

8-1/2"
(21.6 cm)

8-1/2"
(21.6 cm)

12" (30.5 cm) ­18" (45.7 cm)
Grab Bar

1"
(2.5 cm)

1" (2.5 cm)

22-1/2"

8"

(57.2 cm)

(20.3 cm)

4" (10.2 cm)

21"
(53.3 cm)

20" (50.8 cm)

18" (45.7 cm)

1" (2.5 cm)

42"
(106.7 cm)
Grab Bar

46" (116.8 cm)

2" (5.1 cm)

3-1/2"
(8.9 cm)

Attachment Block Locations
(Typically 1" (2.5 cm) Inside Grout Lines)

Product Diagram

1-1/4" (3.2 cm)

54"
(137.2 cm)

2"
(5.1 cm)

75-1/4"
(191.1 cm)

60"
(152.4 cm)

Overflow
Detail

2-7/8" (7.3 cm)

Note: Right and left end walls are
the same, only mirrored.

Backer board locations

ENSEMBLETM BATH AND WALL SURROUND WITH BACKER BOARDS
Page2of2

1061193-4-

D