Sterling SDAA 25-100 User Manual

SDAA 25-100 (15-60 cfm)

Dehumidifying Dryers

Part Number: 882.00290.00
Bulletin Number: DH1-640

Effective: 12/06/05

Write Down Your Serial Numbers Here For Future Reference:

_________________________ _________________________

_________________________ _________________________

_________________________ _________________________

We are committed to a continuing program of product improvement.
Specifications, appearance, and dimensions described in this manual are subject to change without notice.

DCN No. ____________
© Copyright 2005
All rights reserved.

Shipping Information

Unpacking and Inspection

You should inspect your dryer for possible shipping damage.

Thoroughly check the equipment for any damage that might have occurred in transit, such as
broken or loose wiring and components, loose hardware and mounting screws, etc.

In the Event of Shipping Damage

According to the contract terms and conditions of the Carrier, the responsibility of the
Shipper ends at the time and place of shipment.

Notify the transportation company’s local agent if you discover damage.

Hold the damaged goods and packing material for the examining agent’s inspection. Do not

return any goods before the transportation company’s inspection and authorization.

File a claim with the transportation company. Substantiate the claim by referring to the
agent’s report. A certified copy of our invoice is available upon request. The original Bill of
Lading is attached to our original invoice. If the shipment was prepaid, write us for a
receipted transportation bill.

Advise customer service regarding your wish for assistance and to obtain an RMA (return
material authorization) number.

If the Shipment is Not Complete

Check the packing list as back-ordered items are noted on it. You should have:

; Dehumidifying Dryer

; Bill of lading

; Packing list

; Operating and Installation packet

; Electrical schematic and panel layout drawings

; Component instruction manuals

Re-inspect the container and packing material to see if you missed any smaller items during
unpacking.

If the Shipment is Not Correct

If the shipment is not what you ordered, contact the shipping department immediately. For
shipments in the United States and Canada, call 1 [phone]; for all other countries, call
our international desk at [phone]. Have the order number and item number available.
Hold the items until you receive shipping instructions.

Returns

Do not return any damaged or incorrect items until you receive shipping instructions from the
shipping department.

Table of Contents

CHAPTER 1: SAFETY................................................................V

1-1 How to Use This Manual ............................................................................................. v

Safety Symbols Used in this Manual..................................................................... v

1-2 Warnings and Precautions ......................................................................................... vi

1-3 Responsibility .............................................................................................................vii

General Responsibility......................................................................................... vii

Operator Responsibility .......................................................................................viii

Maintenance Responsibility.................................................................................. ix

Reporting a Safety Defect .................................................................................... ix

CHAPTER 2: FUNCTIONAL DESCRIPTION ........................... 11

2-1 Models Covered in This Manual................................................................................11

2-2 General Description................................................................................................... 11

What is desiccant? ..............................................................................................12

The Process/Regeneration Cycle........................................................................ 12

2-3 Standard Features..................................................................................................... 12

Mechanical Features ........................................................................................... 12

Electrical Features............................................................................................... 12

Controller Features.............................................................................................. 13

2-4 Options ...................................................................................................................... 13

2-5 Safety Devices and Interlocks ................................................................................... 13

CHAPTER 3: INSTALLATION.................................................. 15

3-1 Uncrating the Equipment...........................................................................................15

3-2 Rigging and Placing the Dryer................................................................................... 15

Recommended Dryer Lifting Hardware ............................................................... 18

3-3 Electrical Connections............................................................................................... 19

3-4 Setup Procedures...................................................................................................... 20

Checking for Proper Blower Rotation .................................................................. 20

Making Dryer/Drying Hopper Process Air Connections.......................................20

Drying Hopper Air Trap Considerations...............................................................21

Optional Aftercooler............................................................................................. 21

3-5 Initial Start-up ............................................................................................................ 22

Pre-Startup Checks ............................................................................................. 22

Starting Up the Dryer........................................................................................... 22

Auto-Tuning the Dryer ......................................................................................... 22

Shutting Down the Dryer ..................................................................................... 23

CHAPTER 4: OPERATION....................................................... 24

4-1 Start-up...................................................................................................................... 24

4-2 Controller Description and Operation ........................................................................ 25

Identifying Control Panel Indicator Lights and Switches for the Standard

Controller.............................................................................................................25

Process Air Temperature Controller.................................................................... 26

Setting the Process Air Temperature ..................................................................27

Dehumidifying Dryers ii

Restoring the Process Air Temperature Controller (E5CN) to Factory Settings..28

Process Air Dew Point Display............................................................................ 31

Setting the High Dew Point Alarm ....................................................................... 31

Restoring the Process Air Dew Point Meter (E5CK) to Factory Setup ................ 31

Redundant Safety Controller Display ..................................................................32

Setting the Redundant Safety Controller............................................................. 32

Restoring the WATLOW Redundant Safety Controller to Factory Setup ............ 32

4-3 Dryer Operation Procedures .....................................................................................34

Controller Operation (Without Optional Alarm Horn & Reset Button).................34

Controller Operation (With Optional Alarm Horn & Reset Button).......................37

Alarm Display Messages..................................................................................... 39

4-4 Auto-Tuning the Dryer ............................................................................................... 40

4-5 Shutting Down the Dryer ........................................................................................... 40

CHAPTER 5: MAINTENANCE .................................................41

5-1 Preventative Maintenance Schedule......................................................................... 41

5-2 Preventative Maintenance......................................................................................... 42

Servicing Process Air Filters................................................................................42

Servicing the Dew Point Monitor .........................................................................43

5-3 Corrective Maintenance ............................................................................................44

Symptoms of Worn Desiccant ............................................................................. 44

Replacing Worn Desiccant .................................................................................. 45

Replacing the Process Heater............................................................................. 47

CHAPTER 6: TROUBLESHOOTING .......................................48

6-1 Introduction................................................................................................................ 48

6-2 Determining Temperature Controller Errors or Sensor Errors................................... 51

Using a Thermocouple ........................................................................................51

Using a Platinum Resistance Thermometer........................................................ 51

CHAPTER 7: APPENDIX.......................................................... 52

7-1 Warranty.................................................................................................................... 52

Warranty Specifications....................................................................................... 52

Warranty Restrictions .......................................................................................... 52

Warranty Liabilities .............................................................................................. 53

Customer Responsibilities................................................................................... 53

7-2 Optional Components................................................................................................ 53

7-3 Technical Specifications............................................................................................ 54

Annex B Information............................................................................................ 54

Aftercooler Design Specifications........................................................................ 55

7-4 Drawings and Diagrams ............................................................................................ 55

7-5 Spare Parts List......................................................................................................... 55

7-6 Returned Material Policy ........................................................................................... 57

Credit Returns .....................................................................................................57

Warranty Returns ................................................................................................57

7-7 Safety Tag Information .............................................................................................. 57

Dryer Safety Tags ...............................................................................................57

7-8 Dryer Identification (Serial Number) Tag................................................................... 58

7-9 Technical Assistance................................................................................................. 59

Parts Department ................................................................................................59

Dehumidifying Dryers iii

Service Department............................................................................................. 59

Sales Department................................................................................................ 59

Contract Department ........................................................................................... 59

Dehumidifying Dryers iv

Chapter 1: Safety

1-1 How to Use This Manual

Use this manual as a guide and reference for installing, operating, and maintaining your
dehumidifying dryer. The purpose is to assist you in applying efficient, proven techniques
that enhance equipment productivity.

This manual covers only light corrective maintenance. No other maintenance should be
undertaken without first contacting a service engineer.

The Functional Description section outlines models covered, standard features, and safety
features. Additional sections within the manual provide instructions for installation, pre­operational procedures, operation, preventive maintenance, and corrective maintenance.

The Installation chapter includes required data for receiving, unpacking, inspecting, and setup
of the dehumidifying dryer. We can also provide the assistance of a factory-trained technician
to help train your operator(s) for a nominal charge. This section includes instructions, checks,
and adjustments that should be followed before commencing with operation of the
dehumidifying dryer. These instructions are intended to supplement standard shop
procedures performed at shift, daily, and weekly intervals.

The Operation chapter includes a description of electrical and mechanical controls, in
addition to information for operating the dryer safely and efficiently.

The Maintenance chapter is intended to serve as a source of detailed assembly and
disassembly instructions for those areas of the equipment requiring service. Preventive
maintenance sections are included to ensure that your dehumidifying dryer provides
excellent, long service.

The Troubleshooting chapter serves as a guide for identification of most common problems.
Potential problems are listed, along with possible causes and related solutions.

The Appendix contains technical specifications, drawings, schematics, parts lists, and
available options. A spare parts list with part numbers specific to your machine is provided
with your shipping paperwork package. Refer to this section for a listing of spare parts for
purchase. Have your serial number and model number ready when ordering.

Safety Symbols Used in this Manual

The following safety alert symbols are used to alert you to potential personal injury hazards.
Obey all safety messages that follow these symbols to avoid possible injury or death.

DANGER! DANGER indicates an imminently hazardous situation that, if not avoided,

will result in death or serious injury.

WARNING! WARNING indicates a potentially hazardous situation or practice that, if

not avoided, could result in death or serious injury.

Caution! CAUTION indicates a potentially hazardous situation or practice that, if

not avoided, may result in minor or moderate injury or in property damage.

Dehumidifying Dryers Chapter 1: Safety v of 59

1-2 Warnings and Precautions

Our equipment is designed to provide safe and reliable operation when installed and operated
within design specifications, following national and local safety codes. This may include, but
is not limited to OSHA, NEC, CSA, SPI, and any other local, national and international
regulations.

To avoid possible personal injury or equipment damage when installing, operating, or
maintaining this equipment, use good judgment and follow these safe practices:

; Read and follow these operation and installation instructions when installing,

operating, and maintaining this equipment. If these instructions become
damaged or unreadable, additional copies are available from the manufacturer.

; Follow all SAFETY CODES.

; Wear SAFETY GLASSES and WORK GLOVES.

; Work only with approved tools and devices.

; Disconnect and/or lock out power before servicing or maintaining the equipment.

; Use care when LOADING, UNLOADING, RIGGING, or MOVING this

equipment.

; Operate this equipment within design specifications.

; OPEN, TAG, and LOCK ALL DISCONNECTS before working on equipment.

You should remove the fuses and carry them with you.

; Make sure the equipment and components are properly GROUNDED before you

switch on power.

; Use EXTEREME CAUTION when working with dryer. HIGH HEAT can be

dangerous. Keep body parts, tools, clothing, and debris away from dryer.

; When welding or brazing in or around this equipment, make sure VENTILATION is

ADEQUATE. PROTECT adjacent materials from flame or sparks by shielding with

sheet metal. An approved FIRE EXTINGUISHER should be close at hand and
ready for use if needed.

; Do not restore power until you remove all tools, test equipment, etc., and the

equipment and related components are fully reassembled.

; Only PROPERLY TRAINED personnel familiar with the information in this

manual should work on this equipment.

We have long recognized the importance of safety and have designed and manufactured our
equipment with operator safety as a prime consideration. We expect you, as a user, to abide
by the foregoing recommendations in order to make operator safety a reality.

Dehumidifying Dryers Chapter 1: Safety vi

1-3 Responsibility

These machines are constructed for maximum operator safety when used under standard
operating conditions and when recommended instructions are followed in the maintenance
and operation of the machine.

All personnel engaged in the use of the machine should become familiar with its operation as
described in this manual.

Proper operation of the machine promotes safety for the operator and all workers in its
vicinity.

Each individual must take responsibility for observing the prescribed safety rules as outlined.
All warning and danger signs must be observed and obeyed. All actual or potential danger
areas must be reported to your immediate supervisor.

General Responsibility

No mater who you are, safety is important. Owners, operators and maintenance personnel
must realize that every day, safety is a vital part of their jobs.

If your main concern is loss of productivity, remember that production is always affected in a
negative way following an accident. The following are some of the ways that accidents can
affect your production:

• Loss of a skilled operator (temporarily or permanently)

• Breakdown of shop morale

• Costly damage to equipment

• Downtime

An effective safety program is responsible and economically sound.

Organize a safety committee or group, and hold regular meetings. Promote this group from
the management level. Through this group, the safety program can be continually reviewed,
maintained, and improved. Keep minutes or a record of the meetings.

Hold daily equipment inspections in addition to regular maintenance checks. You will keep
your equipment safe for production and exhibit your commitment to safety.

Please read and use this manual as a guide to equipment safety. This manual contains safety
warnings throughout, specific to each function and point of operation.

Dehumidifying Dryers Chapter 1: Safety vii

Operator Responsibility

The operator’s responsibility does not end with efficient production. The operator usually has
the most daily contact with the equipment and intimately knows its capabilities and
limitations.

Plant and personnel safety is sometimes forgotten in the desire to meet incentive rates, or
through a casual attitude toward machinery formed over a period of months or years. Your
employer probably has established a set of safety rules in your workplace. Those rules, this
manual, or any other safety information will not keep you from being injured while operating
your equipment.

Learn and always use safe operation. Cooperate with co-workers to promote safe practices.
Immediately report any potentially dangerous situation to your supervisor or appropriate
person.

REMEMBER:

• NEVER place your hands or any part of your body in any dangerous location.

• NEVER operate, service, or adjust the dryer without appropriate training and first

reading and understanding this manual.

• NEVER try to pull material out of the dryer with your hands while it is running!

• Before you start the dryer check the following:

• Remove all tools from the dryer;

• Be sure no objects (tools, nuts, bolts, clamps, bars) are laying in the

hopper area;

• If your dryer has been inoperative or unattended, check all settings before starting the

unit.

• At the beginning of your shift and after breaks, verify that the controls and other

auxiliary equipment are functioning properly.

• Keep all safety guards in place and in good repair. NEVER attempt to bypass, modify,

or remove safety guards. Such alteration is not only unsafe, but will void the warranty
on your equipment.

• When changing control settings to perform a different mode of operation, be sure

selector switches are correctly positioned. Locking selector switches should only be
adjusted by authorized personnel and the keys removed after setting.

• Report the following occurrences IMMEDIATELY:

• unsafe operation or condition

• unusual dryer action

• leakage

• improper maintenance

• NEVER stand or sit where you could slip or stumble into the dryer

while working on it.

• DO NOT wear loose clothing or jewelry, which can be caught while working on a

dryer. In addition, cover or tie back long hair.

Dehumidifying Dryers Chapter 1: Safety viii

• Clean the dryer and surrounding area DAILY, and inspect the machine for loose,

missing or broken parts.

• Shut off power to the dryer when it is not in use. Turn the switch to the OFF position,

or unplug it from the power source.

Maintenance Responsibility

Proper maintenance is essential to safety. If you are a maintenance worker, you must make
safety a priority to effectively repair and maintain equipment.

Before removing, adjusting, or replacing parts on a machine, remember to turn off all electric
supplies and all accessory equipment at the machine, and disconnect and lockout electrical
power. Attach warning tags to the disconnect switch.

When you need to perform maintenance or repair work on a dryer above floor level, use a
solid platform or a hydraulic elevator. If there is a permanently installed catwalk on your
dryer, use it. The work platform should have secure footing and a place for tools and parts.
DO NOT climb on dryers, machines, or work from ladders.

If you need to repair a large component, use appropriate handling equipment. Before you use
handling equipment (portable “A” frames, electric boom trucks, fork trucks, overhead cranes)
be sure the load does not exceed the capacity of the handling equipment or cause it to become
unstable.

Carefully test the condition of lifting cables, chains, ropes, slings, and hooks before using
them to lift a load.

Be sure that all non-current carrying parts are correctly connected to earth ground with an
electrical conductor that complies with current codes. Install in accordance with national and
local codes.

When you have completed the repair or maintenance procedure, check your work and remove
your tools, rigging, and handling equipment.

Do not restore power to the dryer until all persons are clear of the area. DO NOT start and
run the dryer until you are sure all parts are functioning correctly.

BEFORE you turn the dryer over to the operator for production, verify all dryer enclosure
panels, guards and safety devices are in place and functioning properly.

Reporting a Safety Defect

If you believe that your equipment has a defect that could cause injury, you should
immediately discontinue its use and inform the manufacturer.

The principle factors that can result in injury are failure to follow proper operating procedures
(i.e. lockout/tagout), or failure to maintain a clean and safe working environment.

Dehumidifying Dryers Chapter 1: Safety ix

Dehumidifying Dryers Chapter 1: Safety x

Chapter 2: Functional Description

A

2-1 Models Covered in This Manual

This manual provides operation, installation, and maintenance instructions for 15, 30, and 60
cfm dehumidifying dryers. Model numbers are listed on the serial tag. Make sure you know
the model and serial number of your equipment before contacting the manufacturer for parts
or service.

Our dehumidifying mini dryers are designed to generate heated dehumidified air at carefully
controlled temperatures for use in plastic drying systems. Drying systems are sized to meet
the specific requirements stated by the Customer at the time of purchase.

2-2 General Description

Dehumidifying dryers are used to generate very low dew point air heated to a controlled
temperature for drying plastic pellets and regrind.

Our dryers force hot, dry air through resin in a drying hopper, where air picks up moisture
from the material and draws it back to the dryer. In the dryer, a desiccant bed strips moisture
from the air. The dried process air is then re-heated and delivered back into the drying
hopper to continue to remove moisture.

Figure 15: Typical Dryer Air Flow Schematic

Moisture
Exhaust

Valve

High pressure
prepheral blower

Drying Hopper

Filter (Separates

mbient

Air Flow

Dehumidifying Dryers Chapter 2: Functional Description 11 of 59

A small amount of ambient air is introduced into the process air stream to make up for the air
lost during the bed regeneration. Because the process air is typically much drier than the
ambient air, the air mixture maintains drying efficiency at a consistently high level. This air
is heated to 500° F (260° C) before entering the bed that is on regeneration forcing moisture
from the desiccant before exhausting. To compensate for the humidity content in the air, this
dryer is supplied with the proper amount of desiccant.

What is desiccant?

Desiccant is a material that attracts and holds (absorbs) water from the air. The desiccant our
dryers use is a synthetic crystalline metal aluminosilicate blended with a clay binder and
formed into beads.

The Process/Regeneration Cycle

Our dryers have two desiccant beds. While one bed is on-line in the process air loop, the
other is off-line, being regenerated.

When a desiccant bed is on-line, it absorbs moisture from the process air. In time, the bed
becomes saturated with moisture and needs to be regenerated. The dryer automatically
redirects the process airflow to the second bed, and starts the regeneration cycle on the first
bed.

During regeneration, the dryer system heats air and forces it through the desiccant bed. The
moisture driven off the bed bleeds to the atmosphere.

2-3 Standard Features

Mechanical Features

• Dual desiccant beds

• Electrically-actuated air valve

• 13X Molecular Sieve

• Single regenerative process blower

• Drying temperature range of 180ºF to 250ºF (71° C to 121° C).

• 2.5” hose connections

Electrical Features

• Process thermocouple to be connected to drying hopper air inlet.

• Nema 12 control enclosure

Dehumidifying Dryers Chapter 2: Functional Description 12 of 59

• NFPA79 machinery electrical standards

Controller Features

• Mitsubishi programmable relay controller

• Display of process temperature set point and actual settings

2-4 Options

Options marked with “*” indicate options that can be factory installed or retrofitted in the
field.

• Non-fused electrical disconnect

• Branch fusing

• Mercury process heater contactor

• Regeneration temperature control

• Process high temperature alarm light

• Process/regeneration heater box

• High temperature safety system (Process/Regeneration)

• Dew point monitor with digital read-out

* Process temperature 180ºF to 400˚ F, including aftercooler inside dryer

and silicone insulated delivery hose.

* Process temperature 120˚ F to 250˚ F, includes precooler on back of dryer.

* If the dryer is a central dry air generator, it will not have a process heater

box.

* Plasticizer trap (with cooling coil) in lieu of optional aftercooler (mounts

outside on back of dryer).

* Machine mount adapter to accommodate a dryer and corresponding

hopper.

* Drawer magnet, stainless steel construction.

* Casters, two (2) fixed and two (2) swivel.

* Cart with caster with hopper mounting place.

* Redundant high temp safety control.

* Audible alarm

* Insulated air hose for air delivery

2-5 Safety Devices and Interlocks

This section includes information on safety devices and procedures that are inherent to the
Dryer. This manual is not intended to supersede or alter safety standards established by the
user of this equipment. Instead, the material contained in this section is recommended to
supplement these procedures in order to provide a safer working environment.

At the completion of this section, the operator and maintenance personnel will be able to do
the following:

Dehumidifying Dryers Chapter 2: Functional Description 13 of 59

• Identify and locate specific safety devices.

• Understand the proper use of the safety devices provided.

• Describe the function of the safety device.

Safety Circuit Standards

Safety circuits used in industrial systems protect the operator and maintenance personnel
from dangerous energy. They also provide a means of locking out or isolating the energy for
servicing equipment.

Various agencies have contributed to the establishment of safety standards that apply to the
design and manufacture of automated equipment. The Occupational Safety and Health
Administration (OSHA) and the Joint Industrial council (JIC) are just a few of the
organizations that have joined with the plastics industry to develop safety standards.

Every effort has been made to incorporate these standards into the design of the dryer;
however, it is the responsibility of the personnel operating and maintaining the equipment to
familiarize themselves with the safety procedures and the proper use of any safety devices.

Fail Safe Operation

If a safety device or circuit should fail, the design must be such that the failure causes a
“Safe” condition. As an example, a safety switch must be a normally open switch. The switch
must be held closed with the device it is to protect. If the switch fails, it will go to the open
condition, tripping out the safety circuit.

At no time should the safety device fail and allow the operation to continue. For
example, if a safety switch is guarding a motor, and the safety switch fails, the motor should
not be able to run.

Safety Device Lock-Outs

Some safety devices disconnect electrical energy from a circuit. The safety devices that are
used on these dryers are primarily concerned with electrical power disconnection and the
disabling of moving parts that may need to be accessed during the normal operation of the
machine.

Some of the safety devices utilize a manual activator. This is the method of initiating the
safety lock out. This may be in the form of a plug, lever or a handle. Within this lockable
handle, there may be a location for a padlock. Personnel servicing the equipment should
place a padlock in the lockout handle.

In addition to the safety devices listed above, these dryers are equipped with a line cord plug.
This allows the operator or maintenance personnel to unplug the dryer from its power source
and tag it out. The plug can then be tagged with any number of approved electrical lockout
tags available at most electrical supply stores.

WARNING! Always disconnect and lockout all electrical power and pneumatic (i.e. compressed air)

sources prior to servicing or cleaning the dryer. Failure to do so may result in serious
injury. No one but the person who installed the lockout may remove it.

Dehumidifying Dryers Chapter 2: Functional Description 14 of 59

Chapter 3: Installation

3-1 Uncrating the Equipment

Dehumidifying Dryers are shipped mounted on a skid, enclosed in a plastic wrapper, and
contained in a cardboard box.

1. Pry the crating away from the skid.

Note: Remove the nails holding the box to the skid and lift the box

off carefully; avoiding staples in the 1’ x 4’ wood supports.
Cut the steel banding.

2. Use a pry bar to remove the blocks securing the unit to the skid.

3. Lift unit from sides. Use a pry bar if necessary to carefully remove the

skid from the unit.

4. Lower slowly.

3-2 Rigging and Placing the Dryer

Take care when rigging and placing the dryer. Figures 1, 2 and 3 on the following pages show
a suggested safe rigging diagram. It lets you lift the dryer/hopper unit vertically for
installation on the machine throat. Adjust chain lengths at the center sling bracket before you
lift the unit. Your dryer has built-in lifting lugs.

Caution! If you are mounting a machine-mount dryer with a magnet or transition adaptor on the

machine throat, you must provide additional support to hold the dryer securely on the
machine.

Be aware that off-center static and dynamic hopper loading can occur with machine
vibration. Again, provide additional support to hold the dryer securely on the machine.

For 60 cfm dryer units, you must provide additional support to stabilize these units and
to protect personnel when installing on machine throats.

Use caution and observe safety rules when lifting and placing your dryer!

Dehumidifying Dryers Chapter 3: Installation 15 of 59

Figure 16: Machine-Mount Dryer Dimensions

(

Mounting flange

C

E

E

Diameter hole:

B

PROCESS

TEMPERATURE

CONTROL POWER

ON OFF

ALARM ALARM Silencer

ON

OFF

DEW POINT

ALARM HORN

Hopper mounting flanges on 0.75 and

Notes:

and 1.5 cu. ft. (20 & 40 liter) hoppers
are supplied blank so the customer
can drill to match existing machine throat.

3.0 cu. ft. (80 liter) hoppers and larger

are not supplied with a cast flange

as shown).

F

15, 30, 60 cfm machine-mount dimensions in inches/cm

15 cfm 30 cfm 60 cfm

Dimension in. cm in. cm in. cm in. cm in. cm in. cm

A 41 104 43 109 43 109 46 117 56.75 144 56.75 144

B 36 91 37 94 37 94 44 112 50 127 62 158
C 30 76 30 76 30 76 30 76 34 86 34 86
D 35 89 35 89 35 89 35 89 45.75 116 45.75 116

E 4 10.2 4 10.2 4 10.2 7 17.8 7 17.8 7 17.8

F 1.5 3.8 1.5 3.8 1.5 3.8 2 5.1 2 5.1 2 5.1

3

0.7 ft.

/20 liters 1.5 ft.3/40 liters 1.5 ft.3/40 liters 3.0 ft.3/80 liters 4.0 ft.3/120 liters 6.0 ft.3/160 liters

D

A

Dehumidifying Dryers Chapter 3: Installation 16 of 59

Figure 17: Floor-Mount Dryer Dimensions

C

B

PROCESS

TEMPERATURE

CONTROL POWER

ON OF F

ALARM ALARM Silencer

DEW POINT

ALARM HORN

ON

OFF

D

A

E

15, 30, 60 cfm floor-mount dimensions in inches/cm

15 cfm 30 cfm 60 cfm

Dimension in. cm in. cm in. cm

A 20 51 20 51 24 61
B 32.5 83 32.5 83 32.5 83
C 30 76 30 76 30 76
D 30 76 30 76 34 86
E 23.75 60 23.75 60 28 71

Dehumidifying Dryers Chapter 3: Installation 17 of 59