Sterling Bath/Shower Whirlpool System 76090110, Bath/Shower Whirlpool System 76090120, ACCLAIM 76090120 Specifications

ACCLAIMTM

Features

Compression molded from our exclusive solid Vikrell

•

material
Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
Durable high-gloss finish

•

5 Jets

•

10-year consumer/3-year commercial limited warranty

•

Pump with air switch and grounding-type plug-in cord

•
15″ (38.1 cm) bath whirlpool depth (floor to top of

•

threshold)
60-1/4″ (153 cm) x 31-1/2″ (80 cm) x 73-1/2″

•

(186.7 cm) complete unit rough-in dimensions include
flange

60″ (152.4 cm) x 30″ (76.2 cm) x 72″ (182.9 cm)

•

complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

ASME A112.19.7

•

ASTM E162

•

ASTM E662

•

CSA B45.5/IAPMO Z124

•

NAHB Research Foundation, Inc.

•

UL 1795

•

Specified Model

60″ (152.4 cm) WHIRLPOOL BATH

®

AND WALL SURROUND

76090110

ALSO 76090120

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Model Complete Unit Description Colors/Finishes

76090110 60″ (152.4 cm) whirlpool bath and wall surround, left drain ❑ 0 ❑ Other_____
76090120 60″ (152.4 cm) whirlpool bath and wall surround, right drain ❑ 0 ❑ Other_____

Model Component Description Colors/Finishes

76091110 60″ (152.4 cm) whirlpool bath only, left drain ❑ 0 ❑ Other_____
76091120 60″ (152.4 cm) whirlpool bath only, right drain ❑ 0 ❑ Other_____

Model Wall Component Description Colors/Finishes

71094100 Complete wall set ❑ 0 ❑ Other_____

Page 1 of 2
1016903-4-

K

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

ACCLAIMTM

Technical Information

Fixture*:
Basin area:
Bathing well 44″ (111.8 cm) x 16″ (40.6 cm)
Top area 56″ (142.2 cm) x 23-1/2″ (59.7 cm)
To overflow:
Water depth 12″ (30.5 cm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.

Pump: V Hz A
1-speed 120 60 7

Model door maximum

76090110
76090120

* Varies with alternative walls.

width
58-1/2″ (148.6 cm) 56-1/2″ (143.5 cm)

14"

6" (15.2 cm)

(35.6 cm)

(Typical)

door maximum
height

30" (76.2 cm)

Required Electrical Service

Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):

Pump 120 V, 15 A, 60 Hz

Installation Notes

Install this product according to the installation guide.

Pump is supplied with a grounding-type plug-in cord. Locate
the outlet behind the whirlpool, and within 24″ (61 cm) of the
pump.

Pump access opening is required.

Do not disassemble the pump or piping as this could void the
warranty.

Size the drain cutout to fit the drain assembly that will be
used.

Studs should be positioned roughly as shown.

Adjacent finished wall thickness must not exceed 9/16″
(1.4 cm).

16" (40.6 cm)

Access
Opening

18" (45.7 cm) W
x 15" (38.1 cm) H
Access Panel

3-1/2"
(8.9 cm)

14-1/4"
(36.2 cm)

31-1/2"
(80 cm)

2" (5.1 cm) D.
Drain

Pump
Motor

8-3/4" (22.2 cm)

Location

60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max

8"
(20.3 cm)

4" (10.2 cm)

8"
(20.3 cm)

30" (76.2 cm)

Drain Cutout

3" (7.6 cm)

19"
(48.3 cm)

18"
(45.7 cm)

Product Diagram

22-1/4"
(56.5 cm)

31-1/2"
(80 cm)

15" (38.1 cm)

1-1/2"
(3.8 cm)

1-1/2"
(3.8 cm)

Overflow Detail

54"
(137.2 cm)

1-1/2"
(3.8 cm)

60" (152.4 cm)

2-3/4" (7 cm)

73-1/2"
(186.7 cm)

ACCLAIMTM 60″ (152.4 cm) WHIRLPOOL BATH AND WALL SURROUND
Page2of2

1016903-4-

K