ENSEMBLETM
Features
Compression molded from Sterling’s exclusive solid
•
Vikrell
Integral apron with removable access panel
•
Durable high gloss finish
•
Lightly pebbled bottom surface for sure footing
•
1.25 hp pump with air switch and grounding-type
•
plug-in cord
10 year consumer/3 year commercial limited
•
warranty, pump motor assembly has 1 year limited
warranty
7 Jets
•
60″ (152.4 cm) x 60″ (152.4 cm) x 20.5″ (52.1 cm)
•
complete unit rough-in dimensions include flange
60″ (152.4 cm) x 60″ (152.4 cm) x 20″ (50.8 cm)
•
complete unit finished dimensions
material
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7M
•
ASME A112.19.8M
•
ASTM E162
•
ASTM E662
•
ANSI Z124.1.2
•
IAPMO/UPC
•
Underwriters Laboratories (UL)
•
60″ (152.4 cm) CORNER WHIRLPOOL
BATH
76131100
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Description Colors/Finishes
76131100 60″ (152.4 cm) corner whirlpool, center drain ❑ 0 ❑ Other_____
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1072813-4-
A
ENSEMBLETM
Technical Information
Fixture*: basin area top area
Bathing well 49″ (124.5
cm)x42″
(106.7 cm)
water depth capacity
To overflow 15-1/4″
(38.7 cm)
* Approximate measurements for comparison only.
Pump: Hp V Hz A
1-speed 1.25 120 60 7
72" (182.9 cm)
50″ (127 cm) x
60″ (152.4 cm)
108 gal (408.8 L)
60" (152.4 cm)
44" (111.8 cm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump 120 V, 15 A, 60 Hz
Installation Notes
Install this product according to the installation guide.
Pump is supplied with a grounding type plug-in cord. Locate
the outlet inside the access opening, opposite the pump from
the drain.
Do not disassemble the pump or piping as this could void the
warranty.
Size the drain cutout to fit the drain assembly that will be
used.
Recommended faucet area
60"
(152.4 cm)
20-1/2"
(52.1 cm)
44"
(111.8 cm)
20"
(50.8 cm)
10-1/4"
(26 cm)
42-7/16" (107.8 cm)
Product Diagram
4-1/4"
(10.8 cm)
42-7/16"
(107.8 cm)
24-7/8"
(63.2 cm)
17-1/2" (44.5 cm)
from the Floor to
the Overflow
1" (2.5 cm) from the
Floor to the Drain
1/2"
(1.3 cm)
Tile Flange
Detail
ENSEMBLETM 60″ (152.4 cm) CORNER WHIRLPOOL BATH
Page2of2
1072813-4-
A