Sterling 72040106 User Manual
INTRIGUETM
Features
Compression molded from our exclusive solid Vikrell
•
material
10-year consumer/3-year commercial limited warranty
•
Tongue-and-groove 3-piece modular design allows for
•
easy ″snap together″ installation
Durable high-gloss finish
•
Tile design
•
Wall surround allows for attachment of grab bars
•
40-1/4″ (1022 mm) x 40-1/4″ (1022 mm) x 80-1/4″
•
(2038 mm) unit rough-in dimensions include flange
39″ (991 mm) x 39″ (991 mm) x 79-1/8″ (2010 mm)
•
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E162
•
ASTM E662
•
CSA B45.5/IAPMO Z124
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
•
Specified Model
39″ NEO-ANGLE SHOWER BASE
SURROUND WITH BACKER BOARDS
®
72040106
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Model Complete Unit Description Colors/Finishes
72040106 39″ (991 mm) neo-angle shower base and surround with backer boards ❑ 0 ❑ Other_____
Model Component Description Colors/Finishes
72041100 39″ (991 mm) neo-angle shower base only ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
72044106 Complete wall set with backer boards ❑ 0 ❑ Other_____
Page 1 of 2
1065818-4-
C
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
INTRIGUETM
Technical Information
Model door maximum
width
72040106 15-7/8″ (403 mm) x
27-3/8″ (695 mm) x
15-7/8″ (403 mm)
door maximum
height
74″ (1880 mm)
Installation Notes
Install this product according to the installation guide.
40-1/4" (1022 mm)
14"
(356 mm)
12" (305 mm)
40-1/4"
(1022 mm)
14"
(356 mm)
3-5/16" (84 mm) Drain Hole
Ø 5-1/2" (140 mm) Drain Cutout
12" (305 mm)
8" (203 mm)
Size the drain cutout to fit the drain assembly that will be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown.
Attach grab bars at the specified backer board locations only.
8" (203 mm)
40-1/4"
(1022 mm)
1-1/4" (32 mm)
Left End Wal
24" (610 mm)
Grab Bar
22" (559 mm)
1" (25 mm)
below Grout Line
3-1/2" (89 mm)
18" (457 mm)
Note: Right end wall is the same as left end wall, only mirrored.
Backer board locations
1-1/4" (32 mm)
18" (457 mm)
Grab Bar
3" (76 mm)
from Corner
10"
(254 mm)
4-7/8"
(124 mm)
17-7/16"
(443 mm)
Product Diagram
31" (787 mm)
39"
(991 mm)
27-3/8"
(695 mm)
80-1/4"
(2038 mm)
74"
(1880 mm)
17-7/16"
(443 mm)
INTRIGUETM 39″ NEO-ANGLE SHOWER BASE SURROUND WITH BACKER BOARDS
Page2of2
1065818-4-
C
Loading...