Sterling 71140122 User Manual

ACCORD

®

Features

Compression molded from our exclusive solid Vikrell

•

material
Above-floor-drain (AFD) rough-in

•

Durable high-gloss finish

•

Modular 4-piece design

•
Pivot ″snap together″ installation

•

Wall surround available with smooth finish or glazed

•

tile appearance
10-year consumer/3-year commercial limited warranty

•

Caulkless seam installation

•
17-1/4″ (438 mm) bath depth (floor to top of

•

threshold)
60-1/4″ (1530 mm) x 31-1/4″ (794 mm) x 75-1/2″

•

(1918 mm) complete unit rough-in dimensions include
flanges

60″ (1524 mm) x 30″ (762 mm) x 74-1/4″ (1886 mm)

•

complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

ASTM E162

•

ASTM E662

•

CSA B45.5/IAPMO Z124

•

Specified Model

60″ (1524 mm) AFD BATH AND WALL

®

SURROUND

71140112

ALSO 71140122, 71240112, 71240122

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Model Complete Unit Description Colors/Finishes

71140112 60″ (1524 mm) AFD bath and wall surround, tile wall, left drain ❑ 0 ❑ Other_____
71140122 60″ (1524 mm) AFD bath and wall surround, tile wall, right drain ❑ 0 ❑ Other_____
71240112 60″ (1524 mm) AFD bath and wall surround, smooth wall, left drain ❑ 0 ❑ Other_____
71240122 60″ (1524 mm) AFD bath and wall surround, smooth wall, right drain ❑ 0 ❑ Other_____

Page 1 of 2
1067279-4-

G

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

ACCORD

®

Technical Information

Fixture*:
Basin area:
Bathing well 46-1/4″ (1175 mm) x 20-1/2″ (521 mm)
Top area 52-1/4″ (1327 mm) x 22-1/2″ (572 mm)
To overflow:
Water depth 11″ (279 mm)
Capacity 34 gal (128.7 L)
* Approximate measurements for comparison only.

Model door maximum

71140112
71140122
71240112
71240122

6" (152 mm)
(Typical)

width
56-3/4″ (1441 mm) 56-1/2″ (1435 mm)

14"
(356 mm)

15-1/4"
(387 mm)

31-1/4"
(794 mm)

Ø 2" (51 mm)
Drain

3-1/2"
(89 mm)

60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max

door maximum
height

30" (762 mm)

8"
(203 mm)

10"
(254 mm)

Installation Notes

Install this product according to the installation guide.

Product is designed to be used with a single-handle mixer
valve with an escutcheon cover not to exceed 7-3/4″ (197
mm) in width.

Size the drain hole clearance to fit the drain assembly that will
be used.

Studs should be positioned roughly as shown.

Bath cannot be installed without the wall surround.

The width of the module gets 5/8″ (16 mm) narrower at the
back. Furring strips [approximately 1/4″ (6 mm)] should be
used at the back corner studs if the drywall will overlap the
nailing flange.

16" (406 mm)

8"
(203 mm)

4" (102 mm)

2" (51 mm)
Minimum Drain
Hole Clearance
Through Wall

20-1/4"
(514 mm)

22-1/4"
(565 mm)

59-3/8"
(1508 mm)

31-1/4"
(794 mm)

30"
(762 mm)

1-1/4" (32 mm)

55"
(1397 mm)

75-1/2"
(1918 mm)

21-1/4"
(540 mm)

3-1/8" (79 mm)

Overflow Detail

3" (76 mm) Drain
Bottom to Floor

Product Diagram

ACCORD®60″ (1524 mm) AFD BATH AND WALL SURROUND
Page2of2

1067279-4-

G

17-1/4"
(438 mm)

60"
(1524 mm)