Sterling 71124106 User Manual

ENSEMBLETM

Features

Compression molded from Sterling’s exclusive solid

•

Vikrell®material
Tongue-and-groove ″snap together″ design

•

Durable high gloss finish

•

10 year consumer/3 year commercial limited warranty

•

Tile design

•

Wall surround allows for attachment of grab bars

•
60″ (152.4 cm) x 33-1/4″ (84 cm) x 54″ (137.2 cm)

•

Codes/Standards Applicable

Specified model meets or exceeds the following:

ANSI Z124.1.2

•

IAPMO/UPC

•

CSA B45

•

Specified Model

WALL SURROUND WITH BACKER

BOARDS

71124106

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Model Wall Component Description Colors/Finishes

71124106 Wall surround with backer boards ❑ 0 ❑ Other_____

Model Complete Unit Description Colors/Finishes

71120116 Bath and wall surround with backer boards, left hand drain ❑ 0 ❑ Other_____
71120126 Bath and wall surround with backer boards, right hand drain ❑ 0 ❑ Other_____
71120118 Bath and wall surround with backer boards, left hand AFD ❑ 0 ❑ Other_____
71120128 Bath and wall surround with backer boards, right hand AFD ❑ 0 ❑ Other_____

SterlingPlumbing.com

Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.

Page 1 of 2
1061193-4-

A

ENSEMBLETM

Technical Information

Model Door maximum

71124106 57-11/16″ (146.5 cm) 55-1/2″ (141 cm)

6" (15.2 cm)
(Typical)

width

14" (35.6 cm)

Door maximum
height

30" (76.2 cm)

16" (40.6 cm)

Installation Notes

Install this product according to the installation guide.

End stud positioning is critical if nailing-in flanges are to be
used.

Double studding is recommended for pivot shower door
installations.

Attach grab bars at the specified backer board locations only.

Recommended Support
Clip Location (5 total)

33-1/4"
(84.5 cm)

33-1/4"
(84.5 cm)

Back Wall End Wall

1" (2.5 cm)

Dimensions Taken From
Center of Grout Lines

2" (5.1 cm) D. Drain

3-1/2"
(8.9 cm)

60" (152.4 cm) Min
60-1/8" (152.7 cm) Max

15-1/2"
(39.4 cm)

1" (2.5 cm)

8-1/2"
(21.6 cm)

8-1/2"
(21.6 cm)

12" (30.5 cm) ­18" (45.7 cm)
Grab Bar

1"
(2.5 cm)

18" (45.7 cm) ­30" (76.2 cm)
Grab Bar

22-1/2"
8"
(20.3 cm)

4" (10.2 cm)

(57.2 cm)

21"
(53.3 cm)

20" (50.8 cm)

1" (2.5 cm)

42"
(106.7 cm)
Grab Bar

46" (116.8 cm)

2" (5.1 cm)

Attachment Block Locations
(Typically 1" (2.5 cm) Inside Grout Lines)

Product Diagram

1-1/4" (3.2 cm)

54"
(137.2 cm)

2"
(5.1 cm)

18"
(45.7 cm)

60"
(152.4 cm)

Note: Right and left end walls are
the same, only mirrored.

Backer board locations

75-1/4"
(191.1 cm)

ENSEMBLETM WALL SURROUND WITH BACKER BOARDS
Page2of2

1061193-4-

A