Sterling 71110112 User Manual

ENSEMBLETM

Features

Compression molded from our exclusive solid Vikrell

•

material
Gentle sloping back, neck, and armrest in bath

•

design
Above-floor-drain (AFD) rough-in

•

Factory installed injection molded apron extension

•

and undersupport structure
Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
Durable high-gloss finish

•

10-year consumer/3-year commercial limited warranty

•
18-1/4″ (464 mm) bath depth (floor to top of

•

threshold)
60-1/4″ (1530 mm) x 43-1/2″ (1105 mm) x 75-1/2″

•

(1918 mm) complete unit rough-in dimensions include
flanges

60″ (1524 mm) x 42″ (1067 mm) x 74-1/4″ (1886

•

mm) complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

ASTM E162

•

ASTM E662

•

CSA B45.5/IAPMO Z124

•

Specified Model

42″ (1067 mm) AFD BATH AND WALL

®

SURROUND

71110112

ALSO 71110119, 71110122, 71110129

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Model Complete Unit Description Colors/Finishes

71110112 42″ (1067 mm) AFD bath and wall surround, left drain ❑ 0 ❑ Other_____
71110119 42″ (1067 mm) AFD bath/shower with access panel system, left drain ❑ 0 ❑ Other_____
71110122 42″ (1067 mm) AFD bath and wall surround, right drain (shown) ❑ 0 ❑ Other_____
71110129 42″ (1067 mm) AFD bath/shower with access panel system, right drain ❑ 0 ❑ Other_____

Model Wall Component Description Colors/Finishes

71114100 Complete wall set ❑ 0 ❑ Other_____

Page 1 of 2
1021860-4-

K

For more information

visit SterlingPlumbing.com

or call 1-800-STERLING

ENSEMBLETM

Technical Information

Fixture*:
Basin area:
Bathing well 40″ (1016 mm) x 27″ (686 mm)
Top area 52″ (1321 mm) x 35″ (889 mm)
To overflow:
Water depth 11″ (279 mm)
Capacity 55 gal (208.2 L)
* Approximate measurements for comparison only.

Model Door width Door maximum

All 58-1/2″ (1486 mm) 55-3/4″ (1416 mm)

6" (152 mm)
(Typical)

14"
(356 mm)

height

30" (762 mm)

14"
(356 mm)

Installation Notes

Install this product according to the installation guide.

Size the drain hole clearance to fit the drain assembly that will
be used.

End stud positioning is critical.

Studs should be positioned roughly as shown.

16"
(406 mm)

Ø 2" (51 mm) Minimum Drain
Hole Clearance Through Wall

43-1/2"
(1105 mm)

20-1/4"
(514 mm)

Ø 2" (51 mm) Drain

3-1/2"
(89 mm)

60-1/8" (1527 mm) Min
60-1/4" (1530 mm) Max

Recommended Support Clip
Location (4 Total)

11-1/2"
(292 mm)

8-3/4"
(222 mm)

4"
(102 mm)

8"
(203 mm)

75-1/2"
(1918 mm)

27-1/2"
(699 mm)

1-1/4"
(32 mm)

53"
(1346 mm)

3"
(76 mm)

60"
(1524 mm)

Product Diagram

43-1/2"
(1105 mm)

18-1/4"
(464 mm)

42"
(1067 mm)

1-1/2"
(38 mm)

3-1/8" (79 mm)

Overflow

Detail

21-1/4"
(540 mm)

22-1/4"
(565 mm)

3" (76 mm) Drain
Bottom to Floor

ENSEMBLETM 42″ (1067 mm) AFD BATH AND WALL SURROUND
Page2of2

1021860-4-

K