ENSEMBLETM
Features
Bath and integral apron eliminates installation step
•
Compression molded from Sterling’s exclusive solid
•
Vikrell
Modular 4-piece design
•
Lightly pebbled bottom surface for sure footing
•
Tongue-and-groove ″snap together″ design
•
Durable high gloss finish
•
10 year consumer/3 year commercial limited warranty
•
Gentle sloping back, neck, and armrest in bath
•
design
Wall surround allows for attachment of grab bars
•
Available with above-the-floor drain
•
60″ (152.4 cm) x 37-1/2″ (95.3 cm) x 73-1/4″ (186.1
•
cm) complete unit rough-in dimensions
60″ (152.4 cm) x 36″ (91.4 cm) x 72″ (182.9 cm)
•
complete unit finished dimensions
material
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E84
•
ANSI Z124.1.2
•
IAPMO/UPC
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
•
36″ (91.4 cm) OVAL BATH/SHOWER
SYSTEM WITH BACKER BOARDS
71100116
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Complete Unit Description Colors/Finishes
71100116 Oval bath/shower system and wall surround with backer boards, left drain ❑ 0 ❑ Other_____
71100118 Oval bath/shower system and wall surround with backer boards, above-the-floor left
drain
71100126 Oval bath/shower system and wall surround with backer boards, right drain ❑ 0 ❑ Other_____
71100128 Oval bath/shower system and wall surround with backer boards, above-the-floor right
drain
Model Wall Component Description Colors/Finishes
71104106 Complete wall set with backer boards ❑ 0 ❑ Other_____
❑ 0 ❑ Other_____
❑ 0 ❑ Other_____
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065810-4-
A
ENSEMBLETM
Technical Information
Fixture:* basin area top area
Bathing well 40″ (101.6 cm)
To overflow 11″ (27.9 cm) 40 gal (151.4 L)
* Approximate measurements for comparison only.
Model door maximum
71100116
71100118
71100126
71100128
71100316
71100326
6" (15.2 cm)
x21″ (53.3 cm)
water depth capacity
width
58-1/2″
(148.5 cm)
14"
30" (76.2 cm)
(35.6 cm)
(Typical)
17-1/4"
37-1/2"
(95.3 cm)
(51.4 cm)
Drain Cutout
2" (5.1 cm) D. Drain
3-1/2"
(8.9 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
Back Wall
24" (61 cm)
Grab Bar
52″ (132.1 cm)
x29″ (73.7 cm)
door maximum
height
56-1/2″
(142.2 cm)
16"
(40.6 cm)
11-1/2" (29.2 cm)
4"
(10.2 cm)
8-3/4"
(22.2 cm)
24-1/2"
(62.2 cm)
8"
(20.3 cm)
73-1/4"
(186.1 cm)
End Wall
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
Recommended Support Clip or Roofing Nail
Location (5 Total)
37-1/2" (95.3 cm)
1-1/4"
(3.2 cm)
53"
(134.6 cm)
3"
(7.6 cm)
16"
(40.6 cm)
60"
(152.4 cm)
1-1/2" (3.8 cm)
36" (91.4 cm)
19"
(48.3 cm)
20"
(50.8 cm)
24" (61 cm) Grab Bar
10" (25.4 cm)
18" (45.7 cm) Grab Bar
1" (2.5 cm)
4" (10.2 cm)
3-1/2" (8.9 cm)
1" (2.5 cm)
3-1/2"
(8.9 cm)
1" (2.5 cm)
Product Diagram
ENSEMBLETM 36″ (91.4 cm) OVAL BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065810-4-
A
3-1/8" (7.9 cm)
Overflow Detail
Note: Right and left end walls are
the same, only mirrored.
Backer board locations