PERFORMATM
Features
Compression molded from Sterling’s exclusive solid
•
Vikrell
Above floor drain rough-in
•
Factory installed Vikrell
•
undersupport for ease of installation
Durable high gloss finish
•
Lightly pebbled bottom surface for sure footing
•
10 year consumer/3 year commercial limited warranty
•
17-1/4″ (43.8 cm) bath depth (floor to top of dam)
•
60″ (152.4 cm) x 30-1/4″ (76.8 cm) x 18-1/2″ (47 cm)
•
complete unit rough-in dimensions include flanges
60″ (152.4 cm) x 29″ (73.7 cm) x 17-1/4″ (43.8 cm)
•
complete unit finished dimensions
material
®
apron extension and plastic
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
ASTM E162
•
ASTM E662
•
IAPMO/UPC
•
CSA International
•
CSA B45
•
60″ (152.4 cm) AFD BATH
71041112
ALSO 71041122
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Description Colors/Finishes
71041112 60″ (152.4 cm) AFD bath, left drain ❑ 0 ❑ Other_____
71041122 60″ (152.4 cm) AFD bath, right drain ❑ 0 ❑ Other_____
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1022714-4-
E
PERFORMATM
Technical Information
Fixture*: water depth capacity
To
overflow
* Approximate measurements for comparison only.
Model door maximum
71041112
71041122
* Varies with alternative walls.
10-1/4″ (26 cm) 35 gal (132.5 L)
width
60″ (152.4 cm)* NA*
30" (76.2 cm)
14"
(35.6 cm)
door maximum
height
30" (76.2 cm)
14"
(35.6 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain hole clearance to fit the drain assembly that will
be used.
Stud positioning is critical.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
2" (5.1 cm) Minimum Drain
Hole Clearance Through Wall
6"
(15.2 cm)
30-1/4"
(76.8 cm)
Recommended Support
Clip or Roofing Nail
Location (5 Total)
61031120
14"
(14 cm)
(35.6 cm)
3-1/2"
(8.9 cm)
5-1/2"
2" (5.1 cm)
D. Drain
9-1/8"
(23.2 cm)
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
18-1/2"
(47 cm)
3" (7.6 cm) Drain
Bottom to Floor
1-1/4" (3.2 cm)
4" (10.2 cm)
8"
(20.3 cm)
Product Diagram
21"
(53.3 cm)
30-1/4" (76.8 cm)
29"
(73.7 cm)
3" (7.6 cm)
Overflow Detail
17-1/4"
(43.8 cm)
60" (152.4 cm)
PERFORMATM 60″ (152.4 cm) AFD BATH
Page2of2
1022714-4-
E