Sterling 62060103 User Manual

Features

Compression molded from our exclusive solid Vikrell

•

material
Factory installed stainless steel grab bars

•

Engineered for ease of installation

•

Durable swirl-gloss finish

•

10-year consumer/3-year commercial limited warranty

•

Tongue-and-groove 4-piece modular design allows for

•

easy ″snap together″ installation
1/2″ (13 mm) low profile threshold for easy

•

wheelchair access
63-1/2″ (1613 mm) x 40-5/8″ (1032 mm) x 73-1/4″

•

(1861 mm) direct-to-stud rough-in, including flange
63-1/4″ (1607 mm) x 39-3/8″ (1000 mm) x 72″ (1829

•

mm) complete unit finished dimensions

Codes/Standards Applicable

Specified model meets or exceeds the following:

HUD, UM Bulletin 73A

•

NAHB Research Foundation, Inc.

•

ASTM E162

•

ASTM E662

•

ANSI Z124.1.2

•

63″ (1600 mm) ROLL-IN SHOWER

®

62060103

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/finishes

•

Specified Model

Model Description Colors/Finishes

62060103 63″ (1600 mm) shower receptor and wall surround, with grab bars ❑ 0 ❑ Other_____

Page 1 of 2
1016221-4-

For more information

J

visit SterlingPlumbing.com

or call 1-800-STERLING

Installation Notes

Install this product according to the installation guide.

Drain cutout in subfloor to be 10-1/2″ (267 mm) per rough-in
illustration below to allow the backside of the drain to sit
below the subfloor surface.

Studs should be positioned as shown.

Backer boards and fasteners protrude beyond the back wall
1-1/2″ (38 mm). If installing this product against wall board,
1-1/2″ (38 mm) furring strips installed over the wall board are

recommended. The stud pocket depth of 40-5/8″ (1032 mm)
will need to be increased by the combined thickness of the
wall board and furring strips.

16"

(400 mm)

(406 mm)

18-3/4"
(476 mm)

Ø 10-1/2"
(267 mm)
Drain Cutout

63-3/8" (1610 mm) Min
63-1/2" (1613 mm) Max

15-3/4"

16"
(406 mm)

4"
(102 mm)

31-5/8"
(803 mm)

13"
(330 mm)

8"
(203 mm)

Ø 3-5/16"
(84 mm)
Drain Hole

29"
(737 mm)

63-5/16"
(1608 mm)

40-5/8"
(1072 mm) Max

39-3/8"
(1000 mm)

1-1/4"
(32 mm)

63″ (1600 mm) ROLL-IN SHOWER
Page2of2

1016221-4-

J

73-9/16"
(1868 mm)

8" (203 mm)

39-3/8"
(1000 mm)

1" (25 mm)

Product Diagram

63-1/4"
(1607 mm)

72"
(1829 mm)

33"
(838 mm)

73-1/4"
(1861 mm)