Sterling 61030116 User Manual
ADVANTAGETM
Features
Bath and integral apron eliminates installation step
•
Compression molded from Sterling’s exclusive solid
•
Vikrell
Modular 4-piece design
•
Lightly pebbled bottom surface for sure footing
•
Tongue-and-groove ″snap together″ design
•
Durable high gloss finish
•
10 year consumer/3 year commercial limited warranty
•
Wall surround allows for attachment of grab bars
•
60″ (152.4 cm) x 31-1/4″ (79.4 cm) x 73-1/4″ (186.1
•
cm) complete unit rough-in dimensions includes
flange
60″ (152.4 cm) x 30″ (76.2 cm) x 72″ (182.9 cm)
•
complete unit finished dimensions
material
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASTM E84
•
ANSI Z124.1.2
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
•
60″ (152.4 cm) BATH/SHOWER
SYSTEM WITH BACKER BOARDS
61030116
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Specified Model
Model Complete Unit Description Colors/Finishes
61030116 Bath/shower and wall surround with backer boards, left drain ❑ 0 ❑ Other_____
61030126 Bath/shower and wall surround with backer boards, right drain ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
61034106 Complete wall set with backer boards ❑ 0 ❑ Other_____
SterlingPlumbing.com
Visit us online for fixture color choices, detailed product information, color photos, installation instructions, care
guides, and warranties. Sterling offers additional lines of plumbing products to complement the Sterling product
you’ve chosen. Sign up for the Sterling monthly e-newsletter which showcases our latest product innovations. You
may also call our Sterling Plumbing Answer Center from within the USA at 1-888-STERLING in addition to
consulting with your local dealer. Sterling. Strong. Professional. Design.
Page 1 of 2
1065808-4-
A
ADVANTAGETM
Technical Information
Fixture:* basin area top area
Bathing well 56-3/4″ (144.1 cm)
To overflow 9-3/8″ (23.8 cm) 42 gal (159 L)
* Approximate measurements for comparison only.
Model door maximum
61030116
61030126
61030416
61030426
14" (35.6 cm)
31-1/4"
(79.4 cm)
x 25-1/4″ (64.1 cm)
water depth capacity
width
56-3/4″
(144.1 cm)
30" (76.2 cm)
14-1/4"
(36.2 cm)
8"
(20.3 cm)
Drain Cutout
2" (5.1 cm)
D. Drain
60" (152.4 cm) Min
60-1/8" (152.7 cm) Max
46"
End Wall
(116.8 cm)
24"
(61 cm)
Grab Bar
18"
(45.7 cm)
Grab Bar
22"
(55.9 cm)
2"
(5.1 cm)
2" (5.1 cm)
3-1/2" (55.9 cm)
60″ (152.4 cm) x
30-5/8″ (77.8 cm)
door maximum
height
57″
(144.8 cm)
Back Wall
1"
(2.5 cm)
7-3/4"
(19.7 cm)
24" (61 cm) 36" (91.4 cm)
Grab Bar
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if nailing-in flanges are to be
used.
Double studding is recommended for pivot shower door
installations.
Studs should be positioned roughly as shown for support clip
or roofing nail installation.
Attach grab bars at the specified backer board locations only.
Recommended Support
Clip or Roofing Nail
Location (5 Total)
4"
(10.2 cm)
8"
(20.3 cm)
3-1/2"
(8.9 cm)
22-1/4"
(56.5 cm)
17"
(43.2 cm)
17-5/16"
(44 cm)
10"
(25.4 cm)
19"
(48.3 cm)
4-1/8"
(10.5 cm)
1-1/4"
(3.2 cm)
3-1/2"
(8.9 cm)
1-5/8"
(4.1 cm)
18"
(45.7 cm)
15"
(38.1 cm)
Note: Right and left end walls are
the same, only mirrored.
31-1/4"
(79.4 cm)
60"
(152.4 cm)
Backer board locations
30"
(76.2 cm)
1-1/4"
(3.2 cm)
73-1/4"
(186.1 cm)
17"
(43.2 cm)
2-1/2" (6.4 cm)
Overflow
Detail
Product Diagram
ADVANTAGETM 60″ (152.4 cm) BATH/SHOWER SYSTEM WITH BACKER BOARDS
Page2of2
1065808-4-
A
Loading...